Panasonic Aj Hd150 Operating Instructions Manual

– 41 –
Preview
1After the edit points have been entered, press the PREVIEW button.
Normal preview is now performed.

•If the edit IN point has not been entered, the position where the PREVIEW button was
pressed will be entered at the edit IN point.
•To stop the preview at any time, press the STOP button.
•If the PREVIEW button is pressed again while preview is in progress after the IN point,
preview will start again from the beginning.
•When the edit OUT point is reached, the unit automatically goes into...

– 42 –
Automatic editing
Executing automatic editing
1Press the AUTO EDIT button.
Automatic editing is now performed.
•To stop the editing at any time, press the STOP button.
•When the edit OUT point is reached, the unit goes into the stop mode after postrolling.
Postroll
With assemble editing, editing continues for approx. 2 seconds even after the edit OUT point
has been passed, the tape is rewound to the OUT point, and the unit goes into the stop
mode.
With insert editing, the unit goes into the play...

– 43 –
Review
1Upon completion of the editing, press the REVIEW button.
The review is started in the recorder.
•To stop the review at any time, press the STOP button.
•When the edit OUT point is reached, the unit goes into the stop mode after postrolling.
ON
AUDIO CH SELECTSHIFT ADJTC  SETSTART TC/CTLRESET
TC INTTCTAPE
UB
STAND BY
EDIT PLAY
REW STOPSERVOREC
FFREC INHIBIT
PLAYEREXT EE
MODEREMOTEPUSH
REV FWDRECORDERLOCAL
CONTROL
CH 1
1ASMBL
PREVIEW
REVIEWAUTO EDITPREROLLTRIMAIN
INSET OUT...

– 44 –
Audio split editing
The video edit points and audio edit points can be entered separately, and they can be offset
from each other and edited.
The audio edit points cannot be entered when the assemble editing mode has been
selected. After the edit points have been entered, follow the same operating procedure as
that for insert editing.

Entering the edit points
Video IN point: Press the SET button while holding down the IN button.
Video OUT point: Press the SET button while holding down the OUT...

– 45 –
Audio split editing

Displaying the audio split edit points
The edit points are displayed on the front panel as shown below. (The figure shows an audio
IN point.)
Operations
Video IN point: Press the IN button.
Video OUT point: Press the OUT button.
Audio IN point: Press the A-IN button.
Audio OUT point: Press the A-OUT button.

If the editing mode is switched to assemble editing after audio edit points have entered,
these points will be deleted.

Cueing up the tape to the edit points
Cue-up to...

– 46 –
Setup (default settings)
The unit’s major settings are performed by making selections on menus.
The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3
connector in the unit’s connector area are hooked up.
Changing the settings
1Press the MENU button.
The setup menu appears on the TV monitor and setup menu No. appears on the
counter display. (If the setup has already been performed, the screen showing the
changes made last will appear.)
2Rotate the search dial and select the...

– 47 –
Setup menus
This unit can store up to 5 user files (user 1 to user 5) containing different menu settings, and
these files can be selected and used.
Changing the file
1Press the MENU button.
2Hold down the STAND BY button and press the FF button to switch to the next user file.
Hold down the STAND BY button and press the REW button to switch to the previous
user file.
SYSTEM USER 1 USER 2 USER 3 USER 4 USER 5FF
REWFF
REWFF
REWFF
REWFF
REW
FF
REW
USER FILE
Each user file contains the following...

– 48 –
Setup menus
Lock mode can be set to protect the settings in the system files and user files (USER2 –
USER5). Settings can no longer be changed when this mode is set.
To set and release the lock mode for the system files and user files use setup item No. 30
(MENU LOCK) and setup menu item No. A03 (MENU LOCK), respectively.
Setting and releasing the lock mode.
1Press the MENU button.
2While holding down the STAND BY button, press the REW or FF button, and select the
file for which the lock mode is...

– 49 –
The contents of the USER2 – USER5 files can be copied (loaded) into the USER1 file. In
addition, the contents of the USER1 file can be copied (saved) to the USER2 – USER5 files.
USER1USER2
USER3
USER4
USER5
Settings can be locked.
Settings can be locked.
Settings can be locked.
Settings can be locked. Load or save
Load or save
Load or save
Load or save
Loading a user file
1Press the MENU button.
2While holding down the STANDBY button, press the REW or FF button, and select
USER1.
3Turn the search...

– 50 –
Setup menus
Saving a user file
1Press the MENU button.
2While holding down the STAND BY button, press the REW or FF button, and select
USER1.
3Turn the search dial and move the cursor (¢) on the menu screen to setup item No. A01
(SAVE).
SETUP-MENU  MENU
    NO.A00 - 0000
 759 REC PT MUTE     OFF
 A00 LOAD          USER2
¢A01 SAVE          USER2
 A02 P.ON LOAD       OFF
 END
4While holding down the search button, turn the search dial and select the user file into
which the USER1 contents are to be...