Panasonic Aj Hd150 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj Hd150 Operating Instructions Manual. The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 91
– 91 – 3. Software specifications Protocol 1) Communication parameters Communication system Asynchronous, full duplex Communication speed 300/600/1200/2400/4800/9600 Bit length 7 bit/8 bit Stop bit1 bit/2 bit Parity bitNONE/ODD/EVEN ACK codeACK code returned/ACK code not returned The ACK code is what is returned from the VTR to the controller when data has been successfully sent from the controller. The underlining indicates the factory settings. Any changes to the settings can be made using the setup...
Page 92
![Page 92
– 92 –
RS-232C interface
3) Return format [VTR → controller (PC)]
The following responses are made to the command. If necessary, more than one response is made.
When the communication has terminated normally
1. The receive completion message is returned.
[ACK]
06h
2. The execution completion message is returned.
[STX] [command] [data] [ETX]
02h XX XX XX XX-XX 03h
•[command]: This is the message (data) which is returned or the execution completion message identifier.
•[data]: This is the...](http://img.usermanuals.tech/thumb/58/67769/w300_aj-hd150_en_om_d-91.png "Page 92
– 92 –
RS-232C interface
3) Return format [VTR → controller (PC)]
The following responses are made to the command. If necessary, more than one response is made.
When the communication has terminated normally
1. The receive completion message is returned.
[ACK]
06h
2. The execution completion message is returned.
[STX] [command] [data] [ETX]
02h XX XX XX XX-XX 03h
•[command]: This is the message (data) which is returned or the execution completion message identifier.
•[data]: This is the...")
– 92 – RS-232C interface 3) Return format [VTR → controller (PC)] The following responses are made to the command. If necessary, more than one response is made. When the communication has terminated normally 1. The receive completion message is returned. [ACK] 06h 2. The execution completion message is returned. [STX] [command] [data] [ETX] 02h XX XX XX XX-XX 03h •[command]: This is the message (data) which is returned or the execution completion message identifier. •[data]: This is the...
Page 93
![Page 93
– 93 –
5. Command table
(1) Commands relating to operation control
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OSP [ETX] STOP
[STX] OSP [ETX]This command...](http://img.usermanuals.tech/thumb/58/67769/w300_aj-hd150_en_om_d-92.png "Page 93
– 93 –
5. Command table
(1) Commands relating to operation control
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OSP [ETX] STOP
[STX] OSP [ETX]This command...")
– 93 – 5. Command table (1) Commands relating to operation control •As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is subsequently returned. It is only the execution message which is listed in this table. •In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned. VTR operationSend commandReturn (completion) messageSupplementary notes [STX] OSP [ETX] STOP [STX] OSP [ETX]This command...
Page 94
![Page 94
– 94 –
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OBF [ETX] STANDBY
OFF[STX] OBF [ETX]This command is setting the VTR to standby OFF.
[STX] OSR:data [ETX] SHTL
REVERSE[STX] OSR [ETX]This is the reverse direction shuttle command.
data = n:
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
A:speed data
STILL
×0.03
×0.1
×0.2
×0.5
×1
×1.85
×4.1
×9.5
×16
×32: This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
: This speed differs according to the...](http://img.usermanuals.tech/thumb/58/67769/w300_aj-hd150_en_om_d-93.png "Page 94
– 94 –
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] OBF [ETX] STANDBY
OFF[STX] OBF [ETX]This command is setting the VTR to standby OFF.
[STX] OSR:data [ETX] SHTL
REVERSE[STX] OSR [ETX]This is the reverse direction shuttle command.
data = n:
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
A:speed data
STILL
×0.03
×0.1
×0.2
×0.5
×1
×1.85
×4.1
×9.5
×16
×32: This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
: This speed differs according to the...")
– 94 – VTR operationSend commandReturn (completion) messageSupplementary notes [STX] OBF [ETX] STANDBY OFF[STX] OBF [ETX]This command is setting the VTR to standby OFF. [STX] OSR:data [ETX] SHTL REVERSE[STX] OSR [ETX]This is the reverse direction shuttle command. data = n: 0: 1: 2: 3: 4: 5: 6: 7: 8: 9: A:speed data STILL ×0.03 ×0.1 ×0.2 ×0.5 ×1 ×1.85 ×4.1 ×9.5 ×16 ×32: This speed differs according to the setting selected for setup menu No. 101 (SHTL MAX). : This speed differs according to the...
Page 95
![Page 95
– 95 –
(2) Commands relating to inquiries
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] QCD [ETX] CTL/TC
DATA
REQUEST
[STX] CD data [ETX]This command is...](http://img.usermanuals.tech/thumb/58/67769/w300_aj-hd150_en_om_d-94.png "Page 95
– 95 –
(2) Commands relating to inquiries
•As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
•In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operationSend commandReturn (completion)
messageSupplementary notes
[STX] QCD [ETX] CTL/TC
DATA
REQUEST
[STX] CD data [ETX]This command is...")
– 95 – (2) Commands relating to inquiries •As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is subsequently returned. It is only the execution message which is listed in this table. •In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned. VTR operationSend commandReturn (completion) messageSupplementary notes [STX] QCD [ETX] CTL/TC DATA REQUEST [STX] CD data [ETX]This command is...
Page 96
– 96 – RS-232C interface (3) Microsoft QuickBASIC sample program CLS STX$ = CHR$(&H2): ETX$ = CHR$ (&H3): NAK$ = CHR$(15): ACK$ = CHR$(&H6) PRINT *** RS-232C COMMUNICATION SAMPLE PROGRAM *** PRINT Type Command QUIT to quit. PRINT REM *** Communication Port Initial & Open *** REM Port 1,9600Bps,No parity,8 bit data,1 stop bit OPEN COM1:9600,N,8,1 FOR RANDOM AS #1 LEN = 256 REM *** Input Command & Send Command *** SendCmd: INPUT Input Command =; SEND$ IF SEND$ = QUIT THEN GOTO ProgEnd PRINT #1, STX$ +...
Page 97
– 97 – Connector signals VIDEO IN HD SERIAL IN (DIGITAL) BNC × 2 Active through HD SDTI IN BNC × 2Loop-through, 75Ω termination switch provided VIDEO IN BNC × 2Loop-through, 75Ω termination switch provided HD SDTI IN BNC × 1 (Board, option) VIDEO OUT HD SERIAL OUT (DIGITAL) BNC × 3 SD SERIAL OUT (DIGITAL) BNC × 3 VIDEO OUT BNC × 3 HD REF OUT BNC × 1 SD REF OUT BNC × 1 AUDIO IN SERIAL IN (DIGITAL) BNC × 2 Active through AUDIO IN (DIGITAL) XLR × 4 CH1/CH2,CH3/CH4,CH5/CH6, CH7/CH8 AES/EBU format AUDIO IN...
Page 98
– 98 – Connector signals PARALLEL REMOTE (50P) Pin No.SignalPin No.SignalPin No.Signal 1 REC COMMAND 23 CUE COMMAND 34 ERR 2 STATUS* 2 PLAY COMMAND 24 ERR 1 STATUS* 41 CUE STATUS 3 FF COMMAND 26+POWER 42 REMOTE STATUS 4 REW COMMAND 27 REC STATUS 46 STBY STATUS 5 STOP COMMAND 28 PLAY STATUS 47 GND 11 EJECT COMMAND 29 FF STATUS 49 GND 12 IN SET COMMAND 30 REW STATUS 50 GND 20STBY ON/OFFCOMMAND31 STOPSTATUS 21 ERR 0 STATUS* 33 EJECT STATUS *50-pin error status table RS-232C REMOTE (25-pin D-SUB crossover...
Page 99
– 99 – Specifications GENERAL Power supply:AC 120 V, 50 – 60 Hz Power consumption:230 W Operating ambient temperature: 41°F to 104°F (5°C to 40°C) Operating ambient humidity: 10% to 90% (no condensation) Weight: 44 lbs (20 kg) Dimensions (W × H × D): 16-3/4" (max. 17-3/16" ) × 6-15/16" × 17-11/16" (Not including the support legs, connectors, JOG dial and fan) Recording format: DVCPRO HD Recording video signal: 1080i, 59.94 Hz/60 Hz selectable Recording audio signal: 48 kHz, 16 bits, 8...
Page 100
– 100 – HD SDI output system phase: ±0.5H (1100 samples, 13.5 ns steps) SD SDI Y output gain:–¶ to +3 dB SD SDI P B output gain:–¶ to +3 dB SD SDI P R output gain:–¶ to +3 dB SD SDI Y black level: ±10% SD SDI output system phase: ±0.5H (429 samples, 74ns steps) Composite video output gain:–¶ to +3 dB Composite chroma output gain:–¶ to +3 dB Composite chroma phase: ±30° Composite video output setup: ±14 IRE Composite video output system phase: ±0.5H (429 samples, 74ns steps) Composite video output SC...