Panasonic Aj D700_200dpi Operating Instructions Manual

Mounting a Wireless Microphone
When using the Panasonic wireless microphone system, mount the WX-RA700 wireless receiver.
To the AUDIO OUT Connector
WX-RA700
Wireless Receiver
WX-R980
Camera Attachment
XLR Cable
AUDIO IN switch:
Set the AUDIO IN switch of
the channel to which the
audio signal source is
connected to REAR [LINE].Connect to the AUDIO IN CH1or CH2 Connector.
When detaching the
wireless microphone,
press up the lever on the
bottom of the camera
attachment (1) and detach
the microphone in the...

Mounting the Unit to a Tripod
When mounting the unit to a tripod, use an optional tripod attachment.
1Mount the tripod attachment to the tripod.
Select the attachment hole in consideration of the units and tripod attachment’s center of
gravity. In addition, check that the diameter of the selected hole matches the diameter of the
universal head’s camera mounting screw.
Tripod Attachment
2Mount the camera to the tripod attachment.
Slide the unit forward along the grooves until a clicking sound is heard....

Mounting the Shoulder Belt 

Adjusting the Shoulder Pad Position
The shoulder pad can be slid up to    ” in the forward-backward direction from the center position
(the position when shipped from the factory). Adjust the shoulder pad position to facilitate opera-
tion of the unit.
1Loosen the two screws.
2Slide the pad in the forward-backward direction to select an appropriate position.
3 Tighten the screws to clamp the pad.
Screws
Shoulder Pad
Bottom
- 44 - 

Attaching the Rain Cover
Attach the rain cover as shown in the figure below.
Tighten the Cord.
Secure the surface fastener.When mounting the unit to the tripod
attachment, mount the unit using this hole.
-45- 

Connecting the AQ-EC1 Extension Control Unit (Option)
Connecting the AQ-EC1 extension control unit (option) allows a portion of the camera section
functions to be operated by remote control.
When the AQ-EC1 is connected and the POWER switches of the unit and AQ-EC1 are set to ON,
the unit automatically enters remote control mode.
The handling instructions included with the AQ-EC1 describe operations for when the AQ-EC1 is
connected to an AQ series digital camera.
When the AQ-EC1 is connected to the...

Warning/Status Displays in the Viewfinder and Display Window
Displaying the Setting Menu Inside the Viewfinder
When the MENU SET/OFF switch is set to SET, the setting menu appears on the viewfinder
screen. The setting menu is displayed in page units. The following table lists all pages contained
in the setting menu as well as an outline of the functions for each page.
The setting menu configuration can be changed according to the purpose.
Setting Menu Configuration
Page
No.Page name
58
MARKER
56VF...

Warning/Status Displays in the Viewfinder and Display Window
Changing the setting menu configuration
The setting menu can be configured by selecting only the pages necessary for the application.
Pages are selected using the MENU SELECT page of the engineer menu mode.
When using the engineer menu, switch the unit to engineer mode as described below.
The unit is switched to user mode by setting the MENU SET/OFF switch to “SET”.
The unit is switched to engineer mode by holding down the SHIFT/ITEM and UP...

Basic Setting Menu Operations
The setting menu is operated using the MENU SET/OFF switch and the SHIFT/ITEM, UP, DOWN
and PAGE buttons.
SHIFT/ITEM Switch
UP Button
DOWN Button
PAGE Button
MENU SET/OFF Switch
Displaying the setting menu
1Set the MENU SET/OFF switch to SET.
The status displays at the top and bottom of the viewfinder screen disappear, and the page
on which the previous setting menu operations were completed appears.
When the menu is used for the first time, the first of the selected pages...

Warning/Status Displays in the Viewfinder and Display Window
Selecting the desired item
1Press the SHIFT/ITEM switch.
Each time this button is pressed, the cursor (arrow) which indicates the selected item moves
to the next item.
Cursor
Movement order
– MARKER –
CENTER MARK : ON
SAFETY ZONE : 1
The item can also be selected using the UP and DOWN buttons as follows.
Changing the settings
Press the UP button to increase the setting.
The setting is incremented by 1 level each time
the UP button is pressed....