Panasonic Agvp320 Operating Instructions Manual

51
DVD Operation
You can enlarge specific portions of a JPEG
picture and select the zoom ratio using the
ZOOM button on the remote during JPEG
Playback screen.
Set Zoom size.PressZOOMrepeatedly to change display
as follows.
➡PressSTOP to return the MP3/JPEG MENU.
• You can enlarge the center portion of the image
to one of 2 magnifications.
• Operation can be done during Rotation (below).
× 1.0 (ORIGINAL)
1st press2nd press 
3rd press
× 1.5 (ZOOM 1)× 2.0 (ZOOM 2)
■Use the ,, and   buttons to move the...

52
“AUDIO” selections(Factory preset: English)
To select the audio soundtrack language.
English/Spanish/French/Japanese
Original: Original disc language
OTHER 0000: Other language selection*
1
“SUBTITLE” selections(Factory preset: AUTO)
To select the subtitle language.
AUTO: Same language selected for “AUDIO”
•If language set for “AUDIO” is used in playback,
subtitles will not appear.
•If another language is used during playback,
the subtitles will appear in the language
selected at “AUDIO” setup....

53
DVD Operation
Audio Output (DVD only)
Select the digital output to be output from the optical
digital audio output connector of DECK.
■ ■■ ■
■“LPCM (DVD)” selectionsOFF:Linear PCM of less than 48 kHz/16 bit
is output. When playing DVDs
recorded in linear PCM of over
48 kHz/20 bit, no digital audio is
output. (Factory preset)
PCM:When playing DVDs recorded in linear
PCM of 48 kHz/20 bit/24 bit or more,
digital audio converted to 48 kHz/16 bit
is output.
(Digital output of PCM audio is
restricted to 48...

54
Still Mode (DVD only)
1
Pressto select “STILL MODE,”
and
press
SETrepeatedly for
mode. (See below.)
2
AUTO:“FIELD” (Field still) or “FRAME” (Frame still) is
automatically selected during the still mode.
(Factory preset)
FIELD:“FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with “AUTO” on some discs.
FRAME:“FRAME” (Frame still) is always selected.
Some texts and fine patterns will be seen
clearly when compared with “AUTO” on some
discs.
TV Mode (DVD only)
1...

55
DVD Operation
PROGRESSIVE OUT
1
Pressto select
“PROGRESSIVE  OUT,”
and
press
SETrepeatedly for
mode. (See below.)
2
OFF:Progressive scan signal is not output.
ON:Progressive scan signal is output from the
Component Video Output Connector. Sets the Component Video Output Connector (p. 10, 13)
to output the Progressive scan signal.
3PressACTIONto exit this mode. Press
ACTIONto display DVD MAIN MENU.
• If the television is not progressive
compatible, a progressive scan picture is
not available. Connect...

56
Language Code List
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or
“MENUS” (see p. 52).
Code Language
6566Abkhazian
6565Afar
6570Afrikaans
8381Albanian
6577Ameharic
6582Arabic
7289Armenian
6583Assamese
6588Aymara
6590Azerbaijani
6665Bashkir
6985Basque
6678Bengali; Bangla
6890Bhutani
6672Bihari
6682Breton
6671Bulgarian
7789Burmese
6669Byelorussian
7577Cambodian
6765Catalan
9072Chinese
6779Corsican
7282Croatian
6783Czech
6865Danish
7876Dutch
6978English...

57
For Information
These displays will alert you to a missed operation or provide further instructions.
Warning and Instruction Displays
OSD Caution Page
PLEASE SET CLOCK BY
PRESSING ACTION KEYIf you attempt to set or review a Timer Recording and
the Clock is not set...
PLEASE PREPARE
FOR TIMER RECIf the DECK is not in Stop mode, or cassette is not
inserted, or cassette has no record tab, or tape is at
its end 2 minutes before a Timer Recording is about
to begin...24
24
25
THIS DISC MAY NOT BE PLAYED
IN...

58
Before Requesting Service
Power
Check the following points if you are having trouble with your DECK.
Solution
PROG buttons do not respond...• PROG functions are not available in COMPONENT Video
Output and S-VIDEO OUT. Set TV to either RF IN or VIDEO
IN. (p. 10)
• Check Remote batteries. (p. 4)
• Press VCR or DVD button for DVD/VCR mode. (p. 28)
No power…
Power turns itself off...• Completely insert Power Plug into an AC outlet.
• Press POWER button on.
• Make sure power source is active.
• Auto...

59
For Information
DVD/ Video CD/ CD Solution
Play fails to start even when PLAY is
pressed...
Picture is distorted during rapid
advance or rapid reverse...• This DECK cannot play discs other than DVDs, Video CDs
and CDs.
• The disc may be dirty and require cleaning.
• The picture will be somewhat distorted at times:
this is normal.
• Some discs may have sections which prohibit
Forward/Reverse Scene Search. (p. 23)No Forward/Reverse Scene Search
play...
• If the audio soundtrack and/or subtitle language...

60
Index
A
ACTION button....................................8, 18
Accessories............................................... 4
ADD/DELETE button
  (Add or Delete a Channel)................ 8, 19
Audio Broadcast types
  (Stereo/SAP/Mono)............................... 26
Audio Mode (Playback, Recording)....... 27
Auto Operation Functions....................... 31
Auto Shut-Off........................................... 33
B
Batteries .................................................... 4
C
Channel (“SET...