Panasonic Agvp320 Operating Instructions Manual

21
Basic Operation
Insert a tape with a record tab (p. 6).• DECK power comes on. If Auto VCR/TV (see p. 34) is
set to “OFF,” press VCR/TV on the remote for VCR
mode.1
5 4 2
3
Press CH ,orNUMBER keys
to select the channel.
• If channel number is over 100, first press 100 key
then the other 2 digits.
• For “LINE” input, see p. 35.
Press SPEED
to select the record speed (p. 4).
SP= Standard Play
SLP= Super Long Play
Press REC
to start recording.
(The VCR REC Light-up Indicator lights on
DECK.)
• To edit out...

22
Basic DVD Operation
All connections are made. (pp. 12 ~ 15)
DECK is plugged in.
If DECK is connected to an audio amplifier,
turn the stereo system’s power on.
*1Interactive DVD...
May include multiple camera angles, stories,
etc.
*
2Video CD with playback control...
Particular scenes or information can be
interactively selected from a menu that
appears on the screen.
4PressorNUMBER keys(see
below) to select title,
andpress
SET orPLAY to start playing.
PressPLAYto start playing.
Disc tray closes...

23
Basic Operation
• Please read the disc jacket for operation
information.
• If a single sided disc is placed in upside down,
“THIS TYPE OF DISC CANNOT BE PLAYED.
PLEASE INSERT A DIFFERENT DISC” is
displayed.
• Remove disc and press DECK POWER off when
not in use.
• Disc continues to rotate with menu displayed
even after play is done. Press STOP to clear
menu display when finished with menu.
■ ■■ ■
■Forward/Reverse Scene SearchPressFF/SLOW+ or REW/SLOW- during play.
PressPLAYto release.• Starting...

24
Selection Order SELECT /
WEEKLY
(SA)
13
1431112
WEEKLY
(MO)
WEEKLY
(SU)
DAILY
Timer Recording
Press PROG*
to display Program.
Press PROG
to end programming.
3 1
3) Set remaining items,
press SET
to set START/ STOP
times, CH (channel) or
LINE input (p. 35), and
tape speed (SP, SLP).
Thenpress
to select.
To Enter More Programs,
press
to select and
press SET
to set an unused program
number, and then repeat
step 2.
Or
Press PROG
to exit.
All connections are made. (pp. 12 ~ 15)
TV and DECK are plugged in....

25
VCR Operation
To Replace program...
To Clear program...
Review, Replace or Clear Program Contents:(Recording is not in progress)
or
Press ADD/DLT.
1
2
3
Pressto select number.
Repeat Step 2 (p. 24) to
set new programs.
Press PROG
to end the programming.Hold down STOP in VCR mode for
a few seconds to cancel the Timer
Recording.(The TIMER Light-up Indicator goes
out on DECK.)
• Any future daily or weekly recording will
be performed as programmed.
Press PROG
to display Program List.
4
• When recording...

26
MONO broadcast
Normal monaural sound broadcast.
SAP broadcast
Secondary Audio Program (sub
language) broadcast. Select SAP audio
mode for the sub language.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and display
flickers, select MONO audio mode for
possible better results.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being...

27
VCR Operation
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Audio Mode for Recording
1
2
Make a recording.
See p. 21.3
Audio Mode for Playback
Start playback.
See p. 20.
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback in monaural sound.
• To listen to Hi-Fi stereo playback,the DECK AUDIO (L/R) jacks must be connected to a stereo TV or an
external stereo...

28
Multi-Brand Control Feature
The Remote Control can be set to control certain Televisions.
Find your TV Brand Code Number on the following
page.
Set up for TV control,➛ ➛➛ ➛
➛hold down TV button,
➛ ➛➛ ➛
➛enter code with NUMBER keys.
Multi-Brand Control Setup
Confirm code entry,➛ ➛➛ ➛
➛press POWER to turn selected unit on or off.• See table below for controllable functions in each mode.3 1
• Repeat setup after remote battery replacement.
• Remote will not control every TV made by the
manufacturer...

29
VCR Operation
• Some manufacturers use several codes for one brand.
If the first code entered fails, try the next one listed.
• Some Televisions require you to turn on the power manually.
Panasonic .................................................01, 02
Quasar......................................................01, 02
RCA ................................................................. 03
G E ................................................................... 03...

30
Commercial Skip
DECK fast forwards (skips) over 1, 2, or 3
minutes of recorded tape as desired.
1Press CM/ZERO in Play mode.
• No indication appears on-screen. • The skip time can be changed by pressing
CM/ZERO repeatedly as shown by the figure
below.
Index Search
• If Index Search is started very close to an index
mark, that index mark may not be counted in the
search.
1
2
Tape Operation
Search SystemFor each recording, an invisible index mark is
placed on the tape. A program index and
information...