Panasonic Agvp320 Operating Instructions Manual

31
VCR Operation
Repeat Play
Set to playback a recording over and over.
3 2 1
Press ACTION
to display MENU.
Press
to select “SET UP
VCR,” and press
SET.
• Playback repeats at tape end or if
unrecorded portion over 30 sec. is detected.
Press ACTION
to return to normal screen.4
Pressto select “REPEAT
PLAY,” and press
SETto set “ON” or
“OFF.”
• For repeat play in DVD mode, see page 47.
Auto Operation Functions
■ ■■ ■
■Play Auto Eject(Repeat Play must be off)
Play➛ Tape end ➛ Rewind ➛ Stop
➛ Tape ejects
(If...

32
Tape Operation (continued)
To find out the present tape position and amount of tape
remaining.
1
• “DETECTING TAPE POSITION”
only appears the first time a
cassette is inserted and it takes
several seconds for correct
indication to appear.
• The present tape position
indication and amount of tape
remaining (according to tape
speed) are displayed.
Tape remaining time display may
not be precise.
Tape Position Display
Press TAPE POSITION
to detect current tape position.
Tape position is displayed...

33
VCR Operation
OFF2 Hours
6 Hours4 Hours
Weak Signal Display Feature
When “ON,” picture is displayed regardless of signal
strength.
• ON: Picture is displayed regardless of signal condition,
and may not always be clearly visible.
OFF: Screen turns solid blue when signal is weak or
non-existent.
• Selecting ON has no effect on connected equipment with
blue back feature.
Press ACTION
to return to normal screen.4 3 2
Pressto select “SET UP CHANNEL,”
and
press SET.
Press
to select “WEAK SIGNAL
DISPLAY,”...

34
ACTION
SET SELECT
INPUT STOP
REC STILL/
PAUSE
VCR / TV
Special VCR Features (continued)
VCR/TV Selector FeatureVCR/TV Selection Feature
The VCR/TV selection can be set to auto or manual.
3 1
Press ACTION*
to display MENU.
Press
to select “AUTO VCR/TV,”
and
press SET
to set “ON” or “OFF.”
Press ACTION
to return to normal screen.
4
• OFF(Manual): You select “VCR” or “TV” mode using the
VCR/TV button on the remote.
• ON(Auto):“VCR” mode is automatically set when
VCR is turned on, or in Play mode.
• For...

35
VCR Operation
Copying Your Tapes  (Dubbing)
1Insert a pre-recorded tape.
2
Insert a blank tape with record tab.
Press REC, then STILL/PAUSE
immediately to enter REC/PAUSE
mode.3
Press INPUT to set DECK Input mode
to LINE for Video Input.
(See “Selecting the Input Mode” below.)
4Press PLAY to start dubbing.
Playing VCR starts playback.Press STILL/PAUSE to start dubbing.
DECK starts recording.
Press STOP to stop dubbing.
Caution:• Unauthorized exchanging and/or copying of copyrighted recordings may be...

36
Disc Operation
Please read “Basic DVD Operation”
on page 22.
[Subtitle language]
[Audio sound track language]
• Change the No. by pressing, and
pressSET.
[Audio attribute 1 type, sampling
frequency, bit No. of the disc (see p. 53.)]
• If, after several presses of the AUDIO
button the language does not change,
language selection is not offered on
the disc.
• When disc is removed, language
reverts to initial setting. If this
language is not recorded on the disc,
the language recorded will be heard.
•...

37
DVD Operation
When appears on the screen while a
button is being operated, it means that
the corresponding operation is
prohibited by DECK or the disc.
1PressAUDIOin Play mode
to display the audio screen.
Vocal Selection for Karaoke Discs
(DVD/Video CD)
DVDs may contain scenes shot from multiple camera
angles allowing the same scene to be viewed at different
angles. You can view these angles, if available, using the
ANGLE button.
1PressANGLEin Play mode to display the
angle selection on-screen.
•...

38
You can program specific tracks and order of play.
Program Play (Video CD/CD only)
DECK is in DVD mode, press DVD.
Video CD or CD is inserted.
1PressACTION*to display DVD MAIN MENU.
2
Pressto select “PLAY MODE,”
and
press
SETto display.
3Pressto select
“PROGRAM PLAY,”
and
press
SETto display.
5Pressto select “START,” and
pressSETto start play of programs
in the sequence selected.
• To cancel, pressSTOPduring play, then pressCLEAR.
4Pressto select a track number
(Track numbers on disc
are displayed.),...

39
DVD Operation
Program Repeat Play
(Video CD/CD only)
4PressSETto enter Select mode.
5Pressto select “DISC.”
(DECK Information Screen) (DECK Information Screen)
1Do operation steps 1 through 5 on the
previous page.
2PressDISPLAYto display Disc Information
screen.
(Disc Information Screen)
3PressDISPLAYto display DECK Information
screen.
6PressSETto set mode.
Cursor moves to “REPEAT.”
To cancel, select “REPEAT : OFF” in step 5,
thenpress
SET.
• Up to 16 tracks can be programmed.
•“ ” or “ ” (depending...

40
Tracks are played in a random order.
Random Play (Video CD/CD only)
Press ACTION*
to display DVD MAIN MENU.1
Disc Operation (continued)
Pressto select “PLAY MODE,”
and
press
SETto display.
2
Pressto select “RANDOM
PLAY,” and
press
SETto begin random play.
• To cancel, pressSTOPduring play, then pressCLEAR.
3
DECK is in DVD mode, press DVD.
MENU
STOP PLAY NUMBER
keys
TITLE CLEAR
ACTION
SET SELECT
Ready Checklist