Panasonic Agvp310 Operating Instructions Manual

51
You can enlarge specific portions of a JPEG picture
and select the zoom ratio using the ZOOM button
on the remote during JPEG Playback screen.
Set Zoom size.Press ZOOM repeatedly to change display as
follows.
➡
Press STOP to return the MP3/WMA/JPEG MENU.
You can enlarge the center portion of the image
to one of 2 magnifications.
Operation can be done during Rotation (below).
X 1.0 (ORIGINAL)
1st press2nd press 
3rd press
X 1.5 (ZOOM 1) X 2.0 (ZOOM 2)
Use the , ,  and   buttons to move the
position...

52
“AUDIO” selections(Factory preset: English)To select the audio soundtrack language.English/Spanish/French/Japanese
Original: Original disc language
OTHER 0000: Other language selection*
1
“SUBTITLE” selections(Factory preset: AUTO)To select the subtitle language.AUTO:Same language selected
for “AUDIO”
If language set for “AUDIO” is used in
playback, subtitles will not appear.
If another language is used during
playback, the subtitles will appear
in the language selected at “AUDIO”
setup....

53
Audio Output (DVD only)
Select the digital output to be output from the optical
digital audio output connector of DECK.
  
 “LPCM (DVD)” selections
OFF:Linear PCM of less than 44.1 or 48 kHz/16 bit
is output. When playing DVDs recorded in
linear PCM of over 44.1 or 48 kHz/20 bit, no
digital audio is output. (Factor y preset)
PCM:When playing DVDs recorded in linear PCM of
44.1 or 48 kHz/20 bit/24 bit or more, digital
audio converted to 44.1 kHz/16 bit or 48 kHz/
16 bit is output.
(Digital output...

54
Still Mode (DVD only)
1
Press to select “STILL MODE,”
and
press 
SET repeatedly
for mode. (See below.)
2
AUTO :“FIELD” (Field still) or “FRAME” (Frame still) is
automatically selected during the still mode.
(Factory preset)
FIELD:“FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with “AU T O” on some discs.
FRAME:“FRAME” (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with “AU TO” on some discs.
TV Mode (DVD only)...

55
*Important:If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
PROGRESSIVE OUT
1
Press  to select
“PROGRESSIVE  OUT,”
and
press 
SET repeatedly
for mode. (See below.)
2
OFF:Progressive scan signal is not output.
ON:Progressive scan signal is output from the
Component Video Output Connector. Sets the Component Video Output Connector (p. 10, 13)
to output the Progressive scan signal.
3Press ACTION
to exit this mode.Press 
ACTION
to display...

56
Language Code List
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or
“MENUS” (see p. 52).
   CodeLanguage
7079Faroese
7082French
7089Frisian
7165Irish
7168Scots Gaelic
7176Galician
7178Guarani
7185Gujarati
7265Hausa
7273Hindi
7282Croatian
7285Hungarian
7289Armenian
7365Interlingua
7378Indonesian
7383Icelandic
7384Italian
7387Hebrew
7465Japanese
7473Yiddish
7487Javanese
7565Georgian
7575Kazakh
7576Greenlandic
7577Cambodian
7578Kannada
7579Korean
7583Kashmiri...

57
These displays will alert you to a missed operation or provide further instructions.
Warning and Instruction Displays
PLEASE SET CLOCK BY
PRESSING ACTION KEY
CHECK CASSETTE
RECORD TAB
NO CASSETTE
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERTHEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END      : PLAY
VCR LOCK ACTIVATED
PageCaution OSD
If you attempt to set or review a Timer
Recording and the Clock is not set...
REMOTE CONTROL IS SET
TO TV MODE
USE VCR : VCR KEY
USE DVD : DVD KEY
PLEASE PREPARE
FOR TIMER...

58
Before Requesting Service
Power
No power…
Power turns itself off...
Recording & Playback
TV program cannot be recorded...
Timer recording cannot be
performed…
There is no playback picture, or the
playback picture is noisy or contains
streaks...
During special effects playback
picture may contain some vertical
jitter when using a TV with an
Automatic Vertical Hold Control...
DECK cannot be controlled...
Check the following points if you are having trouble with your DECK.
Solution
Completely insert...

59
Miscellaneous
Programs cannot be viewed on TV...
Video cassette cannot be inserted...
Video cassette ejects when
a recording is started or the power is
turned off for timer recording...
In Stop mode, the motor (CYLINDER)
continues to rotate...
The disc cannot be removed..
Solution
Make sure TV is tuned to VCRs output channel (3 or 4).
Check connections between DECK,
external antenna, and TV.
Set VCR/TV selector to “TV.” (p. 21)
Make sure proper signal source is selected.
If the television is not...

60
Index
DECK & VCR
AACTION button ................................. 8, 18
Accessories............................................ 4
ADD/DELETE button
  (Add or Delete a Channel)............ 8, 19
Audio Broadcast types
  (Stereo/SAP/Mono)............................ 2 6
Audio Mode (Playback, Recording) .... 2 7
Auto Operation Functions .................... 3 1
Auto Shut-Off ........................................ 3 3
BBatteries ................................................. 4
Blue Light (ON/OFF...