Panasonic Agvp310 Operating Instructions Manual

21
Insert a tape with a record tab (p. 6).
1DECK power comes on. If Auto VCR/TV (see p. 32)
is set to “OFF,” press VCR/TV on the remote for
VCR mode.
54 2
3
Press CH , or NUMBER keys
to select the channel.
If channel number is over 100, first press 100 key
then the other 2 digits.
For “LINE” input, see p. 35.
Press SPEED
to select the record speed (p. 4).
SP = Standard Play
SLP = Super Long Play
Press REC
to start recording.
(The VCR REC indicator lights up on Multi Function
Display),
To edit out...

22
Basic DVD Operation
Ready Checklist
All connections are made. (pp. 12 ~ 15)
DECK is plugged in.
If DECK is connected to an audio amplifier,
turn the stereo system’s power on.
*1Interactive DVD...
May include multiple camera angles,
stories, etc.
5Press   or
NUMBER keys (see
below) to select title,
and press 
SET or
PLAY to start playing.
Press PLAY to start playing.
Disc tray closes automatically.
4
If an interactive DVD*1 is used
and TITLE MENU appears, go
to step 5.You may also close tray by...

23
*Important:If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
Please read the disc jacket for operation
information.
If a single sided disc is placed in upside
down, “THIS TYPE OF DISC CANNOT
BE PLAYED. PLEASE INSERT A
DIFFERENT DISC” is displayed.
Remove disc and press DECK POWER
off when not in use.
Disc continues to rotate with menu
displayed even after play is done.
Press STOP to clear menu display when
finished with menu.
Notes...

24
Timer Recording
Press PROG*
to display Program.
Press PROG
to end programming.
3 1
3) Set remaining items,
press SET
to set START/ STOP times,
CH (channel) or LINE
input (p. 35), and tape
speed (SP, SLP).
Then press 
 to select.
To Enter More Programs,
press 
to select and
press SET
to set an unused program
number, and then repeat
step 2.
Or
Press PROG
to exit.
Ready Checklist
All connections are made. (pp. 12 ~ 15)TV and DECK are plugged in.Clock set correctly. (p. 18)Tape has record tab intact. (p....

25
To Replace program...
To Clear program...
Review, Replace or Clear Program Contents:
(Recording is not in progress)
or
Important notes when using DSS Receiver
When recording programs via DSS Receiver, DSS Receiver must be left on.
When recording programs via an antenna or cable, DSS Receiver must be turned off.
Press ADD/DLT. *Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
1
2
3
Press to select number.
To cancel a Timer...

26
MONO broadcast
Normal monaural sound broadcast.
SAP broadcast
Secondary Audio Program (sub
language) broadcast. Select SAP
audio mode for the sub language.
MTS Stereo broadcast
Multi-channel Television Sound
Stereo broadcast. Select STEREO
audio mode.
If stereo broadcast is weak and
display flickers, select MONO audio
mode for possible better results.
MTS Stereo and SAP broadcast
Multi-channel Television Sound
Stereo (main language) and
Secondary Audio Program (sub
language) broadcasts are being...

27
VCR
 Operation
Audio Mode for Recording
1
2
Make a recording.
See p. 21.3
Audio Mode for Playback
Start playback.
See p. 20.
Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback in monaural sound.
To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to
a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14.)
If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
Hi-Fi...

28
Multi-Brand Control Feature
The Remote Control can be set to control some TVs.
Find your TV Brand Code Number on the
following page.
Set up for TV control,➛ ➛➛ ➛
➛hold down TV button,
➛ ➛➛ ➛
➛enter code with NUMBER keys.
Multi-Brand Control Setup
Confirm code entry,
➛press POWER to turn selected unit on or off.
 See table below for controllable functions in each mode.3 1
Repeat setup after remote battery replacement.
Remote will not control every TV made by the
manufacturer listed. If you get no...

29
VCR
 Operation
Some manufacturers use several codes for one brand.
If the first code entered fails, try the next one listed.
Some TVs require you to turn on the power manually. Panasonic .........................................01, 02
Quasar..............................................01, 02
RCA ......................................................... 03
G E ........................................................... 03
Zenith...................................................... 04...

30
Commercial Skip
DECK fast forwards (skips) over 1, 2, or 3
minutes of recorded tape as desired.
1Press CM/ZERO in Play mode.
    PLAY
1st  Press
2nd Press
3rd  Press1 min Skip
2 min Skip
3 min Skip
No indication appears on-screen. The skip time can be changed by
pressing CM/ZERO repeatedly as shown
by the figure below.
Index Search
Note
If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
1
2
Tape Operation
Search System
For each recording, an...