Panasonic Agvp310 Operating Instructions Manual

31
VCR
 Operation
DETECTING TAPE  POSITION
BEG I N                END
                                                SP
                                 R 120 M
 I  N.
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
REPEATREPEAT  PLAY: OFFREMOTE  WARN I NG : ONAUTO  SHUT-OFF: OFF
FRONT  DISPLAY: ONAUTO  VCR/TV: ONTAPE  SELECT : T-120
SELECT :                 SET : SETEND       : ACT I ON     
   SET  UP  VCR  
SELECT :...

32
Special VCR  Features
REC
VCR/TV Selector FeatureVCR/TV Selection Feature
The VCR/TV selection can be set to auto or manual.
3 1
Press ACTION*
to display MENU.
Press 
to select “AUTO VCR/TV,”
and
press SET
to set “ON” or “OFF.”
Press ACTION
to return to normal screen.
4
Note
OFF(Manual):You select “VCR” or “TV” mode using
the VCR/TV button on the remote.
ON(Auto):“VCR” mode is automatically set when
VCR is turned on, or in Play mode.
For more on VCR/TV selection, see “Record one
station, watch...

33
VCR
 Operation
Weak Signal Display Feature
When “ON,” picture is displayed regardless of signal
strength.
ON: Picture is displayed regardless of signal
condition, and may not always be clearly visible.
OFF:Screen turns solid blue when signal is weak or
non-existent.
Selecting ON has no effect on connected equipment
with blue back feature.
Press ACTION
to return to normal screen.
4 3 2
Press 
to select “SET UP
CHANNEL,” and
press SET.
Press 
to select “WEAK SIGNAL
DISPLAY,” and
press SET
to set “ON”...

34
Special VCR Features (continued)
If Multi-brand feature is used (p. 28), and this feature is
set to on, a warning appears whenever an invalid key
is pressed in TV mode.
4 31
If “OFF,” remote warning will not appear
when invalid key is pressed.
Press ACTION*
to display MENU.
Press 
to select
“REMOTE WARNING,” and
press SET
to set “ON” or “OFF.”
Press ACTION
to return to normal screen.
Remote Warning Feature
2
Press 
to select “SET UP VCR,”
and
press SET.
REPEAT  PLAY: OFFREMOTE  WARN I NG : ONAUTO...

35
VCR
 Operation
Copying Your Tapes  (Dubbing)
1Insert a pre-recorded tape.
2
Insert a blank tape with record tab.
Press REC, then STILL/PAUSE
immediately to enter REC/PAUSE
mode.
3
Press INPUT to set DECK Input mode to
LINE for Video Input.
(See “Selecting the Input Mode” below.)
4
Press PLAY to start dubbing.
Playing VCR starts playback.Press STILL/PAUSE to start dubbing.
DECK starts recording.
Press STOP to stop dubbing.
Caution:Unauthorized exchanging and/or copying of copyrighted recordings may...

36
Te amo
Disc Operation
Ready Checklist
Please read “Basic DVD Operation”
on page 22.
[Subtitle language]
[Audio sound track language]
Change the No. by pressing ,
and press SET.
[Audio attribute 1 type, sampling
frequency, bit No. of the disc (see p. 53.)]
Notes
LPCM
Dolby DigitalDTS44.1 kHz
 
192 kHz
1 ch - 5.1 ch
1 ch - 5.1 ch16 bit
20 bit
24 bitLinear PCM disc
Dolby Digital disc
DTS disc
~
ENG
FRA
DEU
ITA
ESP
NLDEnglish
French
German
Italian
Spanish
Dutch
SVE
NOR
DAN
POR
RUS
JPNSwedish
Norwegian...

37
When  appears on the screen while
a button is being operated, it means
that the corresponding operation is
prohibited by DECK or the disc.
The ANGLE Indicator lights up on
DECK when a scene recorded at
different angles is detected.
The angle number can be set
beforehand so that the angle is
switched whenever the ANGLE
Indicator lights up.
1Press AUDIO in Play mode
to display the audio screen.
DVDs may contain scenes shot from multiple camera
angles allowing the same scene to be viewed at different...

38
Some DVDs have more than one title, e.g. movies.
If the disc offers a title menu, you can select the desired
title number. (Operation may vary according to the disc.)
1
Press TITLE*
in Play mode
to display the title screen.
Title Menu (DVD only)
DVDs may offer a special menu. This menu may include
guides to unique contents, audio/subtitle languages, etc.
Although contents and operation may vary, the following
steps show basic procedure for using the menu.
1
2Press MENUin Play mode to display
DVD...

39
You can program specific tracks and order of play.
Program Play (CD only)Ready Checklist
DECK is in DVD mode, press DVD.
CD is inserted.
1Press ACTION
to display DVD MAIN MENU.
2Press to select
“PLAY MODE,” and
press 
SETto display.
3
Press to select
“PROGRAM PLAY,”
and
press 
SET to display.
5
Press  
to select “START,” and
press SET to start play
of programs in the
sequence selected.
To cancel, press STOPduring play, then pressCLEAR.
4Press  
to select a track
number (Track
numbers on disc are...

40
Tracks are played in a random order.
Random Play (CD only)
Press ACTION*
to display DVD MAIN MENU.1
Disc Operation (continued)
Press to select “PLAY MODE,”
and
press 
SETto display.
2
Press 
to select
“RANDOM PLAY,” and
press 
SET
to begin random play.
To cancel, press STOPduring play, then pressCLEAR.
3
PLAY  MODE
SELECT :  
SET : SET
END : ACT I ONPROGRAM  PLAY
RANDOM  PLAY
Ready Checklist
DECK is in DVD mode, press DVD.
“ON” is set ..... When  a  DVD  is  played  back,  the  average  volume  is...