Panasonic Admin Console Wj Mpu955 Ac Users Guide

Configuration 
 
 
57  so that you can modify the conflicting values as necessary, and add the 
records you desire.  
Permissions 
 
The permission tabs allow an administrator to easily permit or deny components access to 
other components. 
   
By default, all components are allowed to access all other components.  An administrator 
must deny permissions. 
 
 
 
1. Highlight a camera and click on the Cam Ctrl permission tab 
 
The Cam Ctrl permission tab allows an administrator to permit or deny a...

Configuration 
 
 
58  Cameras are displayed in the list on the left by ID number, but can also be viewed by 
logical number, control port, or video port.  The grid on the right represents the 
following: 
 
First row = controller IDs 0-9, second row = controller IDs 10-19, etc. 
 
Green blocks indicate an allowed permission, and white blocks indicate that permission is 
denied. 
 
2. Double-click on a specific controller to invert or alternate between permit or 
deny 
 
Be sure to click the save button...

Configuration 
 
 
59  [2] If permission already exists for a Camera that falls within the Target range, that 
original permission will be overwritten. 
 
 
8. Click Yes to continue or No to cancel 
 
 
 
The copy source is the highlighted camera ID from where the Cam Ctrl permissions will 
be copied. 
 
9. Enter the Target ID range of camera ID numbers, with the beginning 
number in the START box, and the ending number in the END box 
 
Permissions existing for cameras within the specified range will...

Configuration 
 
 
60  This button is available: 1) on each of the permission tabs for each component; 2) on the 
Other tab in the Cameras window; and 3) on the Areas window. 
 
 
 
12. Click on the “x” in the upper right corner to close. 
  

Configuration 
 
 
61  Other 
 
The Other tab shows which other NSS components or sequences are configured to 
include the highlighted camera. 
 
This section is informational only.  Changes cannot be made to other components or 
sequences from this window.  Changes must be made from each specific component or 
sequence’s menu option.   
 
On the next image, for example, tour sequence number 1 is configured to include camera 
ID 1.  The Tour Sequence section of this tab for camera ID 1 was automatically...

Configuration 
 
 
62  
Recorder 
 
The Recorder tab allows the administrator to attach cameras to recorders, once a digital 
recorder has been defined in Admin Console.  
 
Click the ID number of the recorder you wish to work with from the Available 
Recorders list, then select the camera ID from the Cameras list. Next, select the channel 
you wish to specify from the Vid CHs (video channels) list. 
 
Only channels that are available are listed in the Channels list. 
 
Click the Assign Recorder button...

Configuration 
 
 
63  Camera Positions (not currently supported) 
 
An operator, from a system controller, can control each camera in the system that 
supports Presets by pressing the Camera Position button on the controller.  The operator 
cannot define positions, but rather, can only recall positions (which are a combination of 
Camera ID and CPreset numbers) that have already been defined.  
 
The Camera Positions setting in MPU955 Admin Console allows administrators to define 
and consolidate the...

Configuration 
 
 
64  1. Enter a Logical number for the position record you are creating 
 
2. Click in the Camera field, and a list of available cameras that support Presets 
will appear on the right of this window 
 
3. Choose the desired camera by double-clicking on its ID number 
 
4. Click in the CPreset field and type in the desired preset number 
 
5. Click in the Scene field and enter a description of the camera view in that 
position, if desired 
 
You can add, edit, delete, or replicate...

Configuration 
 
 
65 
System Controllers 
 
A system controller is a device used by an operator to control specific components within 
the NSS, such as: cameras, monitors, alarms, alarm outputs, etc.  Controllers are 
generally identified to an operator using their ID number, but can be viewed in MPU955 
Admin Console by ID, IPA, EA, or Area. 
 
Definition 
 
1. Select the Controllers command from the Component menu 
 
  
 
 
Add, edit, or delete controller records as necessary using the three icons at...

Configuration 
 
 
66   
 
 SYSTEM CONTROLLERS – Definition 
Field Data 
ID Unique record ID assigned by MPU955 Admin Console as a system controller is added, in order to 
identify one controller to the system. 
MPU955 Admin Console automatically generates this number in consecutive order.  Upon adding 
controllers, the system will automatically assign the next available number. 
Component ID and sequence ID numbers are used primarily in the permission tabs to identify one 
component or sequence from...