Panasonic Admin Console Wj Mpu955 Ac Users Guide

Configuration 
 
 
97  Replicating a Tour Sequence Definition 
 
1. Highlight a configured Tour Sequence ID and click the 
Replicate Tour button 
 
A confirmation message will appear asking “Are you sure you want to REPLICATE this 
Tour within this Area?” and explaining the replication rules: 
 
[1] Records will be generated according to ID. 
 
[2] ID will be incremented to the next available value. 
 
[3] Local # will be incremented from a specified base value you assign. 
 
[4] If a record already...

Configuration 
 
 
98  To modify the replicated Tour Sequences, use the Edit Tour button. 
 
The Other tab on the Tour Sequences window shows the Alarms that the selected Tour 
Sequence ID is associated with. 
 
 
  

Configuration 
 
 
99 
Group Presets (not currently supported) 
 
A Group Preset carries its own ID, and is created from MPU955 Admin Console to 
include a list of camera-monitor connections.  An operator selecting a Group Preset is 
able to display a preset series of camera views over several monitors at one time.  Each 
camera-monitor connection must also include a camera-preset position. 
 
Group Presets must be carefully planned, keeping in mind that they may be used as 
elements of Group Sequences....

Configuration 
 
 
100  Add, edit, delete, and replicate Group Presets, as necessary, using the four buttons at the 
bottom of this window. 
 
 
 GROUP PRESETS – Definition 
Field Data 
ID  Unique record number identifying a single Group Preset assembling several camera-
monitor pairs that an operator can view at one time.  MPU955 Admin Console assigns this 
ID as a Group Preset is added. 
MPU955 Admin Console automatically generates this number in consecutive order.  Upon 
adding Group Presets, the...

Configuration 
 
 
101  1. To add a group preset, click the green Add Preset button 
 
The following panel will appear. 
 
 
 
MPU955 Admin Console will automatically assign the next available ID. 
 
2. Fill in the area and local number 
 
3. Give the group preset a descriptive name 
 
4. Add camera to monitor pairs to the Set of View section by clicking on the ID 
numbers for each as needed  
 
Double-click on a camera and a monitor from the lists on the right.  It will automatically 
insert that camera...

Configuration 
 
 
102  6. To add a step in the middle of a sequence, highlight a step and 
click the Insert View button  
 
A blank row will appear before the highlighted step. 
 
7. To delete a step, highlight a step and click the Delete View 
button 
 
The entire row will be deleted. 
 
After adding all desired steps, click the green check mark to continue, or the red X to 
cancel 
 
Add, edit, delete, or replicate group presets as needed. 
 
When changing the area of an existing Group Preset, notice...

Configuration 
 
 
103   
Replicating a Group Preset Definition 
 
1. Highlight a configured Group Preset ID and click the Replicate 
Preset button 
 
A confirmation message will appear asking “Are you sure you want to REPLICATE this 
Preset within this Area?” and explaining the replication rules: 
 
[1] Records will be generated according to ID. 
 
[2] ID will be incremented to the next available value. 
 
[3] Local # will be incremented from a specified base value you assign. 
 
[4] If a record already...

Configuration 
 
 
104  Group Presets existing within the specified range will not
 be overwritten. 
 
6. To modify the replicated Group Presets, use the Edit Preset button 
 
The Other tab on the Group Presets window displays the Group Sequences associated 
with the selected Group Preset ID. 
 
 
 
 
  

Configuration 
 
 
105 
 
Group Sequences (not currently supported) 
  
Programmed in MPU955 Admin Console, a Group Sequence combines several group 
presets, separated by specific periods called dwells. 
 
Although an operator will call tour sequences or presets by local number within a specific 
area, an administrator can view these sequences by ID or area\local numbers within 
MPU955 Admin Console. 
 
 
Definition 
 
 
 
  

Configuration 
 
 
106  Add, edit, delete, or replicate group sequences, as necessary, using the four buttons at the 
bottom of this window. 
 
 
 GROUP SEQUENCES – Definition 
Field Data 
ID Unique record ID assigned by MPU955 Admin Console as a group sequence is added, in 
order to identify one programmed group of several group presets to the system. 
MPU955 Admin Console automatically generates this number in consecutive order.  Upon 
adding group sequences, the system will automatically assign the...