Panasonic Admin Console Wj Mpu955 Ac Users Guide

Configuration 
 
 
127 
Help 
 
An on-line help file introduces the MPU955 Admin Console software and allows for a 
keyword search of topics.  Select the Contents… command from the Help menu. 
 
 
 
Help is also available from any of the MPU955 Admin Console windows by pressing the 
F1 key on the computer’s keyboard.  This will display information about the window 
from which F1 was pressed.  
 
On-line help is available to guide an administrator through software installation, creating 
and configuring...

Appendix A 
 
 
128 
Appendix A 
 
This appendix outlines, by category, the various fields and the valid values for those 
fields in the table that appears when the Advanced Config button is selected on the GX 
Device screen, and the GX Details window appears. 
 
Choose which details you wish to view using the drop-down menu in the upper left 
corner of the screen. A description for each field within each detail category follows. 
 
Alarm Notification 
 
 ALARM NOTIFICATION 
Field Data 
Mode Description:...

Appendix A 
 
 
129 
 ALARM NOTIFICATION 
Field Data 
Alarm  
Retransmission 
Timer Description: Specifies a retry timer for an alarm notification. When GX device does not 
receive a response of an alarm notification packet, it sends the same packet after this timer 
expires. 
Validation: decimal numeral 0-255 
Default Setting: 10 
Control Site Description: Specifies IP address of the camera control site. 
Validation: 0 for WJ-MPU955, 1 for other device. When this value is set to 1, Control Address 
is...

Appendix A 
 
 
130 
 DIGITAL SYSTEM SETUP 
Field Data 
NTP Port No. Description: Specifies a NTP server port number. 
Validation: hexadecimal numeral 0000 -FFFF 
Default Setting: (None) 
NTP Time Interval Description: Specifies a NTP sequence time in hex format. The time unit is in hours. 
Validation: hexadecimal numeral 01 - 18 
Default Setting: 1 
Host Name Description: Specifies a host name of the device. It is a string up to 64 characters. 
Validation: Within 64 characters. 
Default Setting: (None)...

Appendix A 
 
 
131 
 ENCODER 
Field Data 
Port Description: Specifies a local control port for the device. 
Validation: decimal format, 1 - 1024 
Default Setting: Automatically assigned. 
Note: This port number is the same as the port number of the CAMERA page, and it is necessary to 
associate it. 
Audio Description: Specifies the audio mode for the device. 
Validation: 0 = OFF, 1 = ON 
Default Setting: 0 
Video & Audio 
Encryption Description: Specifies the video stream classification. 
Validation: 0...

Appendix A 
 
 
132 
 ENCODER 
Field Data 
Comment Description: A string to put comment notes. 
Validation: Within 16 characters. 
Default Setting: (None) 
 
 
Decoder 
 
 DECODER 
Field Data 
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a 
system domain. Its format is shown as below: 
        _ _ _ _  _ X X X  device id (by rotary SW of an decoder front panel) 
        X X X X X _ _ _   device type  
Validation: Device type [0x0F000 encode,...

Appendix A 
 
 
133 
 DECODER 
Field Data 
Background Color Description: Specifies the background color of character on the monitor. 
Validation: 0 = OFF, 1=ON 
Default Setting: 0 
Latency Buffer Description: Specifies decode buffer memory size for network latency. The Memory size is in 
Mbits 
Validation: 0, 0.5, 1, 2, 4, 8, 16, 32 
Default Setting: 0 
Comment Description: A string to put comment notes. 
Validation: Within 16 characters. 
Default Setting: (None) 
 
 
Digital Input 
 
 DIGITAL INPUT...

Appendix A 
 
 
134  Digital Output 
 
 DIGITAL OUTPUT 
Field Data 
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a 
system domain. Its format is shown as below: 
        _ _ _ _  _ X X X  device id (by rotary SW of an encoder front panel) 
        X X X X X _ _ _   device type  
Validation: Device type [0x0F000 encode, 0x1F000 decoder, other reserved] 
Default Setting: 0x0F000XXX 
XXX is the value registered in Address[SW1] of the previous page...

Appendix A 
 
 
135 
 RS485 DATA PORT 
Field Data 
Data Description: Specifies serial communication packet size. 
Validation: 5 = 5bits, 6 = 6bits, 7 = 7bits, 8 = 8bits 
Default Setting: 8 
Parity Description: Specifies serial communication parity bits. 
Validation: 0 = None, 1 = Odd, 2 = Even 
Default Setting: 0 
Stop Bit Description: Specifies serial communication stop bits. 
Validation: 1 = One bit, 2 = Two bits 
Default Setting: 1 
Mode Description: Specifies serial communication packet mode...

Appendix A 
 
 
136  Specific Notification (Currently Not Supported) 
 
This is the setup for a specific encoder or decoder that sends alarm notifications to 
another device (except MPU955). 
 
When Alarm Notification is set up, it is not necessary to change these settings.
 
 
 SPECIFIC NOTIFICATION 
Field Data 
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a 
system domain. Its format is shown as below: 
        _ _ _ _  _ X X X  device id (by...