Panasonic 60 Manual
Here you can view all the pages of manual Panasonic 60 Manual. The Panasonic manuals for Cordless Telephone are available online for free. You can easily download all the documents as PDF.
Page 31
Answering System 31For assistance, please visit http://www.panasonic.com/help Note: LIf you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. When the Spanish voice guidance is selected To start the voice guidance, press {9}. The voice guidance announces the available remote commands (page 31). Note: LIf you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. Remote commands You can...
Page 32
Answering System 32For assistance, please visit http://www.panasonic.com/help 2{V}/{^}: “Answering device” i {OK} 3{V}/{^}: “Settings” i {OK} 4{V}/{^}: “Ring count” i {OK} 5{V}/{^}: Select the desired setting. i {OK} i {OFF} For voice mail service subscribers If you subscribe to a flat-rate service package that includes Caller ID, call waiting, voice mail, and unlimited local/regional/long distance calls, please note the following: LTo use the voice mail service provided by your service...
Page 33
Voice Mail Service 33For assistance, please visit http://www.panasonic.com/help Voice mail service Voice mail is an automatic answering service offered by your service provider/telephone company. After you subscribe to this service, your service provider/telephone company’s voice mail system answers calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your service provider/ telephone company, not your telephone. Please contact your...
Page 34
Intercom/Locator 34For assistance, please visit http://www.panasonic.com/help Intercom Intercom calls can be made between handsets. Note: LIf you receive an outside call while talking on the intercom, you hear 2 tones. To answer the call with the handset, press {OFF}, then press {C}. LWhen paging a handset, the paged handset beeps for 1 minute. Making an intercom call 1 {MENU} 2{V}/{^}: “Intercom” i {OK} 3Select the handset you want to page by pressing the desired handset number ({1} - {6}). LTo...
Page 35
Useful Information 35For assistance, please visit http://www.panasonic.com/help Wall mounting Note: LMake sure that the wall is strong enough to support the weight of the unit. Base unit ■ KX-TG4011 series: page 3 Drive the screws (not supplied) into the wall.■ KX-TG4021/KX-TG4071 series: page 3 1Lead the AC adaptor cord and telephone line cord through the hole in the wall mounting adaptor in the direction of the arrow. 2Tuck the telephone line cord inside the wall mounting adaptor (A). Connect...
Page 36
Useful Information 36For assistance, please visit http://www.panasonic.com/help 4Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 5Mount the unit on a wall then slide down to secure in place. To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). Charger Drive the screws (not supplied) into the wall. 83 mm (31/4 inches) or 102 mm (4 inches) 83 mm (31/4 inches)102 mm (4 inches) (120 V AC,...
Page 37
Useful Information 37For assistance, please visit http://www.panasonic.com/help Error messages If the unit detects a problem, one of the following messages is shown on the display. *1 KX-TG4021/KX-TG4071 series: page 3 Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again. General use...
Page 38
Useful Information 38For assistance, please visit http://www.panasonic.com/help Programmable settings Battery rechargeThe unit does not work.LMake sure the batteries are installed correctly (page 10). LFully charge the batteries (page 10). LCheck the connections (page 10). LUnplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again. LThe handset has not been registered to the base unit. Register the handset (page 23). I cannot hear a dial tone.LThe base unit’s AC adaptor...
Page 39
Useful Information 39For assistance, please visit http://www.panasonic.com/help Making/answering calls, intercom *1 KX-TG4021/KX-TG4071 series: page 3 ProblemCause/solution w is flashing.LThe handset is too far from the base unit. Move closer. LThe base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. LThe handset is not registered to the base unit. Register it (page 23). Noise is heard, sound cuts in and out.LYou are using the handset or base unit in an area with...
Page 40
Useful Information 40For assistance, please visit http://www.panasonic.com/help Caller ID ProblemCause/solution Caller information is not displayed.LYou must subscribe to Caller ID service. Contact your service provider/telephone company for details. LIf your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. LIf you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the...