Panasonic 54"class 1080p Plasma Hdtv Tc P54z1 Operating Instructions

							5051
Advanced
 Network Setting
Network Setting
This is a setting for connecting to a broadband environment.
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
Display menu
Select “Setup”
Menu
Picture
Audio
Timer
Lock
VIERA Link
SD card
Closed caption
Setup
 select
 set or next
Select “Network setting”
Setup2/2
Advanced setup
About
Reset to defaults VIERA Link settings
Network setting
VIERA CAST setting
Network Cameras list
ECO/energy saving
select
Select the item and adjust
Network setting 2/2
MAC address12-34-56-78-80-ab
LAN speed settingAutomaticLAN speed---Software update
Network setting 1/2Connection testSucceededIP setting modeAutomaticIP address---.---.---.---Subnet mask---.---.---.---Default gateway---.---.---.---DNS setting modeOKPrimary DNS---.---.---.---Automatic
Secondary DNS---.---.---.---
 select
 adjust
 The network settings become effective when you close the menu and run “Connection test”.
Connection 
test
Check that the network settings are as shown below, and then start “Connection test”.
  Select “Connection test” and press OK.Succeeded: “Connection  test”  succeeded
Only home network:
    Home network is available.
Failed:   Check the broadband environment connection 
and settings and the network settings, and then 
perform the test again.
Test in progress
---:      Test not yet performed
*Press OK again to cancel the test.
(It takes a while to cancel the test.)
Network setting
1/2Connection testSucceededIP setting modeManualIP address192.168.0.5Subnet mask255.255.255.0Default gateway192.168.0.254
 select
 ok
IP setting
•  IP setting 
mode
•   IP address
•   Subnet mask
•   Default 
gateway
  Select “IP setting mode” and set to “Automatic”.■ Manual setting
  Select “IP setting mode” and set to “Manual”
 
 Select the item and press OK
 
  Check the specifications of the broadband router and  enter each IP address.
(When IP automatic acquisition in DHCP can be used)
Network setting 1/2Connection testSucceededIP setting modeAutomaticIP address---.---.---.---Subnet mask---.---.---.---Default gateway---.---.---.---
The acquired address is displayed.
 select
 ok
 
Subnet maskOK10I0  . 0  . 0  . 0
 change 
channel
 ok
or  Each IP address is acquired automatically.
DNS setting
•  
DNS setting 
mode
•   Primary DNS
•   Secondary 
DNS
  Select “DNS setting mode” and set to “Automatic”.
(When DNS automatic acquisition in DHCP can be used)
Network setting 1/2Connection testSucceededIP setting modeAutomaticDefault gateway192.168.0.254DNS setting mode OKPrimary DNS---.---.---.---Automatic
Secondary DNS---.---.---.---
The acquired address is displayed.
 select
 ok
  Each IP address is acquired automatically.
If you are using a broadband router, IP automatic 
acquisition in DHCP can be used under normal 
circumstances. If you are not sure, check with the 
person who installed the equipment, or check the 
instructions for each device.
■ Manual setting
  Select “DNS setting mode” and set to “Manual”
 
 Select the item and press OK
 
  Enter each IP address as was specified by the  provider.
 
Primary DNS10I0  . 0  . 0  . 0
  select
 ok
or
Connection 
speed 
setting
•  
LAN speed 
setting
•   LAN speed
  Select “LAN speed setting” (Default is “Automatic”)  Normally, select “Automatic”.
  If “Connection test” failed, set the “LAN speed setting” 
to “manual” and then select “10BASE half duplex”, 
“10BASE duplex”, “100BASE half duplex” or “100 BASE 
duplex”.
  Cannot be selected when the “LAN speed setting” is 
“Automatic”.
  Changing the settings may make it impossible to 
connect some types of equipment. 
Network setting 2/2
MAC address12-34-56-78-80-ab
LAN speed settingAutomaticLAN speed---Software update
 select
 adjust
Software 
update
  Select “Software update” Press OK to start the software update screen.
  Follow directions of the screen.
 * Set “Clock” first. (p. 24)
Network setting 2/2OK
MAC address12-34-56-78-80-ab
LAN speed settingAutomaticLAN speed---Software update
 select
 ok 
						

							5253
Advanced
 VIERA CAST
TM
 Setting
VIERA CAST
TM
 Setting
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
Display menu
Select “Setup”
Menu
Picture
Audio
Timer
Lock
VIERA Link
SD card
Closed caption
Setup
 select
 set or next
Select “VIERA CAST setting”
Setup2/2
Advanced setup
About
Reset to defaults VIERA Link settings
Network setting
VIERA CAST setting
Network Cameras list
ECO/energy saving
select
Select the item and adjust
VIERA CAST settingProxy address
Proxy port0
---Connection test
select
 VIERA CAST setting will be effective when you close the menu or run “Connection test”.
Connection 
test
 Select “Connection test” and Press OK
VIERA CAST settingProxy address
Proxy port0
---Connection test
 select
 ok
   When a connection is made to the connection test site 
and a message is displayed that indicates a successful 
connection 
 The settings are correct.
  When the connection is not successful 
 An error message is displayed on the screen.
*   Check the connection and settings. (p. 50-51, below)
If you perform the proxy settings, check the proxy 
address and the proxy port number.
Set only if specified by the provider.
It is not required for normal household use.
Proxy 
setting
•  Proxy 
address
•   Proxy port
■ Proxy address
  This is the address of the relay server that is  connected to the target server instead of the browser 
and sends data to the browser.
  Setting is only required if specified by the provider.
 
   Select “Proxy address” and Press OK
■ Proxy port
  This number is specified by the provider together with 
the proxy address.
 
   Select “Proxy port” and Press OK.
 
   Enter the Port number.
Proxy port0
 select
 ok
or
VIERA CAST settingProxy address
Proxy port0
---Connection test
 select
 ok
    Enter address
(see “Entering characters” below)
Proxy addressprIo
   Select “OK” If you perform the proxy settings, it may make it 
impossible to view VIERA CAST movie content.
Entering 
characters
You can use the remote control key to enter the alphanumeric characters.
Select OK
RETURN
Delete
ABC  → abc
GY
Navigation area
Select OK
RETURN
Delete
ABC  → abc
GY
Switches Input mode alphabet to numeric.
VIERA CAST settingProxy address
Proxy port0
---Connection test
Characters are displayed as shown in following table.
ABC/abc 123
123456789101112
1@. / :~_1 1
2 a/A b/B c/C 2 2
3 d/D e/E f/F 3 3
4 g/G h/H i/I 4 4
5 j/J k/K l/L 5 5
6 m/M n/N o/O 6 6
7 p/P q/Q r/R s/S 7 7
8 t/T u/U v/V 8 8
9 w/W x/X y/Y z/Z 9 9
0-,;?!()&\00
LAST * # $ % = | { } [ ] *
- Space # 
						

							5253
Advanced
 VIERA CAST
TM
 Setting
VIERA CAST
TM
 Setting
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
Display menu
Select “Setup”
Menu
Picture
Audio
Timer
Lock
VIERA Link
SD card
Closed caption
Setup
 select
 set or next
Select “VIERA CAST setting”
Setup2/2
Advanced setup
About
Reset to defaults VIERA Link settings
Network setting
VIERA CAST setting
Network Cameras list
ECO/energy saving
select
Select the item and adjust
VIERA CAST settingProxy address
Proxy port0
---Connection test
select
 VIERA CAST setting will be effective when you close the menu or run “Connection test”.
Connection 
test
 Select “Connection test” and Press OK
VIERA CAST settingProxy address
Proxy port0
---Connection test
 select
 ok
   When a connection is made to the connection test site 
and a message is displayed that indicates a successful 
connection 
 The settings are correct.
  When the connection is not successful 
 An error message is displayed on the screen.
*   Check the connection and settings. (p. 50-51, below)
If you perform the proxy settings, check the proxy 
address and the proxy port number.
Set only if specified by the provider.
It is not required for normal household use.
Proxy 
setting
•  Proxy 
address
•   Proxy port
■ Proxy address
  This is the address of the relay server that is  connected to the target server instead of the browser 
and sends data to the browser.
  Setting is only required if specified by the provider.
 
   Select “Proxy address” and Press OK
■ Proxy port
  This number is specified by the provider together with 
the proxy address.
 
   Select “Proxy port” and Press OK.
 
   Enter the Port number.
Proxy port0
 select
 ok
or
VIERA CAST settingProxy address
Proxy port0
---Connection test
 select
 ok
    Enter address
(see “Entering characters” below)
Proxy addressprIo
   Select “OK” If you perform the proxy settings, it may make it 
impossible to view VIERA CAST movie content.
Entering 
characters
You can use the remote control key to enter the alphanumeric characters.
Select OK
RETURN
Delete
ABC  → abc
GY
Navigation area
Select OK
RETURN
Delete
ABC  → abc
GY
Switches Input mode alphabet to numeric.
VIERA CAST settingProxy address
Proxy port0
---Connection test
Characters are displayed as shown in following table.
ABC/abc 123
123456789101112
1@. / :~_1 1
2 a/A b/B c/C 2 2
3 d/D e/E f/F 3 3
4 g/G h/H i/I 4 4
5 j/J k/K l/L 5 5
6 m/M n/N o/O 6 6
7 p/P q/Q r/R s/S 7 7
8 t/T u/U v/V 8 8
9 w/W x/X y/Y z/Z 9 9
0-,;?!()&\00
LAST * # $ % = | { } [ ] *
- Space # 
						

							5455
Advanced
 Lock
Lock
You can lock specified channels or shows to prevent children from watchin\
g objectionable content.
■ Press to exit from 
a menu screen
 
Caution
 Make a note of your password in case 
you forget it. (If you 
have forgotten your 
password, consult 
your local dealer.)
Note
 When you select a  locked channel,
a message will be 
displayed that allows 
you to view the 
channel if you input 
your password.
Display menu
Select “Lock”
Menu
VIERA Link Picture
Audio
Timer
Lock
SD card
Closed caption
Setup
 next
 select
You will be asked to enter your 
password each time you display 
the Lock menu.
Input your 4-digit password
A 4-digit code must be entered to view a blocked program or change rating\
 settings.
RETURN
Password
Enter password.
- - - -
 If it is your first time entering the password, enter the password 
twice in order to register it.
Select the Lock mode
Off
Off
Off Off
Off
Lock
Mode
Channel
Game
VIERA CAST
Change password Program
 set
 select
Off:   Unlocks all the lock 
settings of “Channel”, 
“Game”, “Program” and 
“VIERA CAST”.
All:   Locks all the inputs 
regardless of the lock 
settings of “Channel”, 
“Game”, “Program” and 
“VIERA CAST”.
Custom:  Locks specified inputs 
of “Channel”, ”Game”, 
“Program” and 
“VIERA CAST”.
Select the item 
Custom
Off
Off Off
Off
Lock
Mode
Channel
Game
VIERA CAST
Change password Program
select
 “Channel”, ”Game”, “Program” 
and “VIERA CAST” are not 
accessible unless “Custom” is 
selected in “Mode”.
Set
set
■ To select the channel or the rating of the program to be locked
Channel 
lock
Select up to 7 (1-7) channels to be blocked. These channels will be blocked regardless of the 
program rating. 
 Select “Mode” and set to “Custom”
 Select channel to lock.
Custom
3
4
-
-
-
Channel lockMode
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5 select 
 set
 To lock/unlock all channels:
  Select “Mode” and set to “All” or “Off”.
 All: Locks all channels
 Off: Unlocks all channels
Game lock
Locks Channel 3, Channel 4 and external 
inputs.
Select “Game” in 5 and set to “On”.
  select 
 set On:  Locks
Off:  Unlocks
Program
lock
■ To set a rating level
“V-chip” technology enables restricted shows 
to be locked according to TV ratings.
 Select “Mode” and set to “On”.
On
Off
Off
Off
OffProgram lockMode
MPAA
U.S.TV
C.E.L.R.
C.F.L.R. set
 select
  Select the rating category you wish  to follow
On
Off
Off
Off
OffProgram lockMode
MPAA
U.S.TV
C.E.L.R.
C.F.L.R. next
 select
MPAA:  U.S movie ratings
U.S.TV:  U.S TV program ratings
C.E.L.R.:Canadian English ratings
C.F.L.R.: Canadian French ratings
  
 Select the rating to be locked
select
Example of “MPAA” (U.S movie ratings)
NR No rating G General Audience:   All  ages  admitted
PG Parental Guidance Suggested
PG-13 Parents Strongly Cautioned:  Inappropriate 
for children under 13
R Restricted:  Under 17 requires 
accompanying parent or adult guardian
NC-17 No one 17 and under admitted X Adults only
 To get more information (p. 63)
VIERA CAST 
lock
VIERA CAST lock
Locks VIERA CAST.
Select “VIERA CAST” in 5 and set to “On”.
When you press VIERA CAST, the “VIERA CAST Lock” 
screen is displayed.
Type the correct password to enter the Home screen.
  select 
 set On:  Locks
Off:  Unlocks
Change 
password
■ To change the password
   In , select “Change password” and 
press OK
 
 Input the new 4-digit password twice
Off
Off
Off Off
Off
LockMode
Channel
Game
VIERA CAST
Change password ProgramRETURN
Change password
Enter new password.
- - - -
Note
 This television is designed to support the  “Downloadable U.S. Region\
 Rating System” when available. (Available  only in U.S.A.)
 The Off rating is independent of other ratings.
 When placing a lock on a specific-age-based-rating level, the Off rating and any other more restrictive ratings will also be blocked. 
						

							5455
Advanced
 Lock
Lock
You can lock specified channels or shows to prevent children from watchin\
g objectionable content.
■ Press to exit from 
a menu screen
 
Caution
 Make a note of your password in case 
you forget it. (If you 
have forgotten your 
password, consult 
your local dealer.)
Note
 When you select a  locked channel,
a message will be 
displayed that allows 
you to view the 
channel if you input 
your password.
Display menu
Select “Lock”
Menu
VIERA Link Picture
Audio
Timer
Lock
SD card
Closed caption
Setup
 next
 select
You will be asked to enter your 
password each time you display 
the Lock menu.
Input your 4-digit password
A 4-digit code must be entered to view a blocked program or change rating\
 settings.
RETURN
Password
Enter password.
- - - -
 If it is your first time entering the password, enter the password 
twice in order to register it.
Select the Lock mode
Off
Off
Off Off
Off
Lock
Mode
Channel
Game
VIERA CAST
Change password Program
 set
 select
Off:   Unlocks all the lock 
settings of “Channel”, 
“Game”, “Program” and 
“VIERA CAST”.
All:   Locks all the inputs 
regardless of the lock 
settings of “Channel”, 
“Game”, “Program” and 
“VIERA CAST”.
Custom:  Locks specified inputs 
of “Channel”, ”Game”, 
“Program” and 
“VIERA CAST”.
Select the item 
Custom
Off
Off Off
Off
Lock
Mode
Channel
Game
VIERA CAST
Change password Program
select
 “Channel”, ”Game”, “Program” 
and “VIERA CAST” are not 
accessible unless “Custom” is 
selected in “Mode”.
Set
set
■ To select the channel or the rating of the program to be locked
Channel 
lock
Select up to 7 (1-7) channels to be blocked. These channels will be blocked regardless of the 
program rating. 
 Select “Mode” and set to “Custom”
 Select channel to lock.
Custom
3
4
-
-
-
Channel lockMode
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5 select 
 set
 To lock/unlock all channels:
  Select “Mode” and set to “All” or “Off”.
 All: Locks all channels
 Off: Unlocks all channels
Game lock
Locks Channel 3, Channel 4 and external 
inputs.
Select “Game” in 5 and set to “On”.
  select 
 set On:  Locks
Off:  Unlocks
Program
lock
■ To set a rating level
“V-chip” technology enables restricted shows 
to be locked according to TV ratings.
 Select “Mode” and set to “On”.
On
Off
Off
Off
OffProgram lockMode
MPAA
U.S.TV
C.E.L.R.
C.F.L.R. set
 select
  Select the rating category you wish  to follow
On
Off
Off
Off
OffProgram lockMode
MPAA
U.S.TV
C.E.L.R.
C.F.L.R. next
 select
MPAA:  U.S movie ratings
U.S.TV:  U.S TV program ratings
C.E.L.R.:Canadian English ratings
C.F.L.R.: Canadian French ratings
  
 Select the rating to be locked
select
Example of “MPAA” (U.S movie ratings)
NR No rating G General Audience:   All  ages  admitted
PG Parental Guidance Suggested
PG-13 Parents Strongly Cautioned:  Inappropriate 
for children under 13
R Restricted:  Under 17 requires 
accompanying parent or adult guardian
NC-17 No one 17 and under admitted X Adults only
 To get more information (p. 63)
VIERA CAST 
lock
VIERA CAST lock
Locks VIERA CAST.
Select “VIERA CAST” in 5 and set to “On”.
When you press VIERA CAST, the “VIERA CAST Lock” 
screen is displayed.
Type the correct password to enter the Home screen.
  select 
 set On:  Locks
Off:  Unlocks
Change 
password
■ To change the password
   In , select “Change password” and 
press OK
 
 Input the new 4-digit password twice
Off
Off
Off Off
Off
LockMode
Channel
Game
VIERA CAST
Change password ProgramRETURN
Change password
Enter new password.
- - - -
Note
 This television is designed to support the  “Downloadable U.S. Region\
 Rating System” when available. (Available  only in U.S.A.)
 The Off rating is independent of other ratings.
 When placing a lock on a specific-age-based-rating level, the Off rating and any other more restrictive ratings will also be blocked. 
						

							5657
Advanced
 Editing and Setting Channels
Editing and Setting Channels
The current channel settings can be changed according to your needs and \
reception 
conditions.
■ Press to exit from 
a menu screen
Display menu
Select “Setup”
Menu
Picture
Audio
Timer
Lock
VIERA Link
SD card
Closed caption
Setup
 next
select
Select “ANT/Cable setup”
Setup1/2
Clock
ANT/Cable setup
Input labels
Anti image retention
Remote control registration
Reset to defaults Language
All
Channel surf mode
 next
 select
Select the function
Cable
ANT/Cable setup
ANT in
Auto program
Manual program
Signal meter next
 select
Set
■To reset the settings of setup menu
 
 Select “Reset to defaults” in Setup menu () and press OK
  Input your 4-digit password with number buttons
 
  Select “YES” on the confirmation screen and press OK
Auto
program
Set
automatically
Automatically searches and adds available channels to the memory.
 Select “ANT in”
    Select Cable or Antenna 
Or select “Not used” (p. 22). 
 Select “Auto program”
CableANT/Cable setupANT in
Auto program
Manual program
Signal meter next
 select
 Select a scanning mode (p. 23)
Auto program
All channels
Analog only
Digital only ok
  select
Settings are made automatically 
 After the scanning is completed, select “Apply”.
(see below 
).
 All previously saved channels are erased.
Manual
program
Set
manually
Use this procedure when changing the channel setup or 
changing the channel display.
Also, use this to add or skip channels from the channel 
list manually. 
You can select a channel tuning mode (Digital only/
Analog only) in “Channel surf mode” (p. 42) Edit
  Caption
---
80-101
Change OK
RETURN
Delete
ABC  → abc
GY
Edit CH caption
Caption Channel
 select
 change
 set/next
or
  Caption  
Select the station identifier (maximum 7 characters available)
  Favorite
Set favorite 1/3
26-11
2
 select
 next
  Set favorite    Select the number
  Add
Press OK to select “Yes (add)” or “No (skip)”  
 Move cursor to channel number
Manual programEdit Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
Channel 
select
 Press OK to tune 
to the channel.
 Select “Apply”
 programCancel
Apply
Caption Favorite Add ...
...
Ye s
el select “Apply”
 ok
 Select “Edit”
Manual programEdit
Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
Channel
 
 select
 next
 Select the item to be edited
RGBY
Select
RETURNOK
Manual programEdit
Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
6 ...
...
Ye s
7 ...
...
Ye s
8 ...
...
Ye s
9 ...
...
Ye s
Channel
Prev.page Next page
Caption
Favorite
Add
Proceed to 
next page
Go back to previous page
 select the item  to edit (Caption/
Favorite/Add)
 next
• Caption:
  Changes the station identifier
• Favorite:
  Registers channel to Favorite  List
• Add:
  Adds or skips channels
To cancel the EditManual programEdit Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
Channel
 select
 next
Changes will be lost. Continue?Ye s
No ok
  (returns to “ANT/ Cable setup”)
 select “Yes”
Signal
meter
Check 
signal 
strength
Check the signal strength if an interference is found or freezing occurs\
 on a digital image.
1-1Signal  meterChannel
Tune manually
Signal  strength
Current 30%
Peak level 45%Signal intensity 
 change  channel
 ok
or
 If the signal is weak, check the antenna.
If no problem is found, consult your local dealer.
Note
 Not available if “Cable” is selected in “ANT in”  (see above).
 Available only for digital antenna channels.
 If “Lock” (p. 54) is activated and “ANT/Cable setup” is se\
lected, “Enter password.” will be displayed. 
						

							5657
Advanced
 Editing and Setting Channels
Editing and Setting Channels
The current channel settings can be changed according to your needs and \
reception 
conditions.
■ Press to exit from 
a menu screen
Display menu
Select “Setup”
Menu
Picture
Audio
Timer
Lock
VIERA Link
SD card
Closed caption
Setup
 next
select
Select “ANT/Cable setup”
Setup1/2
Clock
ANT/Cable setup
Input labels
Anti image retention
Remote control registration
Reset to defaults Language
All
Channel surf mode
 next
 select
Select the function
Cable
ANT/Cable setup
ANT in
Auto program
Manual program
Signal meter next
 select
Set
■To reset the settings of setup menu
 
 Select “Reset to defaults” in Setup menu () and press OK
  Input your 4-digit password with number buttons
 
  Select “YES” on the confirmation screen and press OK
Auto
program
Set
automatically
Automatically searches and adds available channels to the memory.
 Select “ANT in”
    Select Cable or Antenna 
Or select “Not used” (p. 22). 
 Select “Auto program”
CableANT/Cable setupANT in
Auto program
Manual program
Signal meter next
 select
 Select a scanning mode (p. 23)
Auto program
All channels
Analog only
Digital only ok
  select
Settings are made automatically 
 After the scanning is completed, select “Apply”.
(see below 
).
 All previously saved channels are erased.
Manual
program
Set
manually
Use this procedure when changing the channel setup or 
changing the channel display.
Also, use this to add or skip channels from the channel 
list manually. 
You can select a channel tuning mode (Digital only/
Analog only) in “Channel surf mode” (p. 42) Edit
  Caption
---
80-101
Change OK
RETURN
Delete
ABC  → abc
GY
Edit CH caption
Caption Channel
 select
 change
 set/next
or
  Caption  
Select the station identifier (maximum 7 characters available)
  Favorite
Set favorite 1/3
26-11
2
 select
 next
  Set favorite    Select the number
  Add
Press OK to select “Yes (add)” or “No (skip)”  
 Move cursor to channel number
Manual programEdit Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
Channel 
select
 Press OK to tune 
to the channel.
 Select “Apply”
 programCancel
Apply
Caption Favorite Add ...
...
Ye s
el select “Apply”
 ok
 Select “Edit”
Manual programEdit
Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
Channel
 
 select
 next
 Select the item to be edited
RGBY
Select
RETURNOK
Manual programEdit
Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
6 ...
...
Ye s
7 ...
...
Ye s
8 ...
...
Ye s
9 ...
...
Ye s
Channel
Prev.page Next page
Caption
Favorite
Add
Proceed to 
next page
Go back to previous page
 select the item  to edit (Caption/
Favorite/Add)
 next
• Caption:
  Changes the station identifier
• Favorite:
  Registers channel to Favorite  List
• Add:
  Adds or skips channels
To cancel the EditManual programEdit Cancel
Apply
Caption Favorite Add
2 ...
...
Ye s
3 ...
...
Ye s
4 ...
...
Ye s
5 ...
...
Ye s
Channel
 select
 next
Changes will be lost. Continue?Ye s
No ok
  (returns to “ANT/ Cable setup”)
 select “Yes”
Signal
meter
Check 
signal 
strength
Check the signal strength if an interference is found or freezing occurs\
 on a digital image.
1-1Signal  meterChannel
Tune manually
Signal  strength
Current 30%
Peak level 45%Signal intensity 
 change  channel
 ok
or
 If the signal is weak, check the antenna.
If no problem is found, consult your local dealer.
Note
 Not available if “Cable” is selected in “ANT in”  (see above).
 Available only for digital antenna channels.
 If “Lock” (p. 54) is activated and “ANT/Cable setup” is se\
lected, “Enter password.” will be displayed. 
						

							5859
Advanced
 Input Labels
 Closed Caption
Closed Caption 
Closed caption
Display
Closed 
caption
The television includes a built-in decoder that is capable of providing \
a text display of the audio. 
The program being viewed must be transmitting Closed caption (CC) info\
rmation. (p. 64)
■ Select the item and set
 
PrimaryCC1On
Closed caption
Digital Mode
Analog
Digital setting Reset to defaults
 select
 set
Mode
Select “On” (when not using, select 
“Off”).
Analog (Choose the Closed caption service 
of Analog  broadcasting.)
CC1-4:  Information related to pictures  (Appears at bottom of screen)
T1-4: Textual information (Appears over entire screen)
Digital (The Digital Closed caption 
menu lets you configure the way 
you choose to view the digital 
captioning.)
Select the setting.
 “Primary”, “Second.”, “Service 3”, “Service  4”, “Service 5”, “Service 6”
 The settings in “Analog” or “Digital”depend on the broadcaster.
■ To make more in-depth display settings in digital programs
 
 Select “Digital setting” and press OK
 
 Select the item and set
 
Automatic
Automatic
Automatic
AutomaticAutomaticAutomaticAutomatic
Automatic
Digital settingSize
Foreground Font
Style
Fore. opacity
Background
Back. opacity
Outline
 select
 set
 Size:  Text size
 Font:  Text font
 Style:  Text style (Raised, Depressed, etc.)
 Foreground:  Color of text
 Fore. opacity:  Opacity of text
 Background:  Color of text box
 Back. opacity:  Opacity of text box
 Outline:  Outline color of text
  (Identify the setting options on the screen.)
■ To reset the settings
  Select “Reset to defaults” and press OK
■ Press to exit from 
a menu screen
Display menu
Select “Closed caption”
Menu
VIERA Link Picture
Audio
Timer
Lock
SD card
Closed caption
Setup
 next
 select
Input Labels
Input labels
Display
labels of
connected 
devices
Devices connected to external input terminals can be labeled for easier \
identification during 
input selection. (In selecting input mode from p. 32 
)
■ Select the terminal and label of the external equipment
GAME
GAME
Input labelsComponent 1
Component 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Video 1
Video 2
PC
orG A A
Select OK
RETURN
Delete
ABC  → abc
GY
Input labelsComponent 1
Switches Input mode from alphabetical to numeric
 select
 set
Video 1
VCR
Label Terminal
[example] Terminals:    Component 1-2/HDMI 1-4/Video 1-2/PC
 Label:   [BLANK] SKIP/VCR/DVD/CABLE/SATELLITE/DVR/GAME/ AUX/RECEIVER/COMPUTER/Blu-ray/CAMERA/DVD REC/
HOME THTR/MONITOR/MEDIA CTR/MEDIA EXT/OTHER
  For the PC terminal, only “SKIP” is available.
*  If “SKIP” is selected, the INPUT button press will skip its input.
 Each selected label will be displayed on “Input select” screen. (\
p. 32)
■ Press to exit from 
a menu screen
Display menu
Select “Setup”
Menu
Picture
Audio
Timer
Lock
VIERA Link
SD card
Closed caption
Setup
 next
 select
Select “Input labels”
Setup 1/2
Clock
ANT/Cable setup
Input labels
Anti image retention
Remote control registration Language
All
Channel surf mode
 next
 select 
						

							5859
Advanced
 Input Labels
 Closed Caption
Closed Caption 
Closed caption
Display
Closed 
caption
The television includes a built-in decoder that is capable of providing \
a text display of the audio. 
The program being viewed must be transmitting Closed caption (CC) info\
rmation. (p. 64)
■ Select the item and set
 
PrimaryCC1On
Closed caption
Digital Mode
Analog
Digital setting Reset to defaults
 select
 set
Mode
Select “On” (when not using, select 
“Off”).
Analog (Choose the Closed caption service 
of Analog  broadcasting.)
CC1-4:  Information related to pictures  (Appears at bottom of screen)
T1-4: Textual information (Appears over entire screen)
Digital (The Digital Closed caption 
menu lets you configure the way 
you choose to view the digital 
captioning.)
Select the setting.
 “Primary”, “Second.”, “Service 3”, “Service  4”, “Service 5”, “Service 6”
 The settings in “Analog” or “Digital”depend on the broadcaster.
■ To make more in-depth display settings in digital programs
 
 Select “Digital setting” and press OK
 
 Select the item and set
 
Automatic
Automatic
Automatic
AutomaticAutomaticAutomaticAutomatic
Automatic
Digital settingSize
Foreground Font
Style
Fore. opacity
Background
Back. opacity
Outline
 select
 set
 Size:  Text size
 Font:  Text font
 Style:  Text style (Raised, Depressed, etc.)
 Foreground:  Color of text
 Fore. opacity:  Opacity of text
 Background:  Color of text box
 Back. opacity:  Opacity of text box
 Outline:  Outline color of text
  (Identify the setting options on the screen.)
■ To reset the settings
  Select “Reset to defaults” and press OK
■ Press to exit from 
a menu screen
Display menu
Select “Closed caption”
Menu
VIERA Link Picture
Audio
Timer
Lock
SD card
Closed caption
Setup
 next
 select
Input Labels
Input labels
Display
labels of
connected 
devices
Devices connected to external input terminals can be labeled for easier \
identification during 
input selection. (In selecting input mode from p. 32 
)
■ Select the terminal and label of the external equipment
GAME
GAME
Input labelsComponent 1
Component 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
Video 1
Video 2
PC
orG A A
Select OK
RETURN
Delete
ABC  → abc
GY
Input labelsComponent 1
Switches Input mode from alphabetical to numeric
 select
 set
Video 1
VCR
Label Terminal
[example] Terminals:    Component 1-2/HDMI 1-4/Video 1-2/PC
 Label:   [BLANK] SKIP/VCR/DVD/CABLE/SATELLITE/DVR/GAME/ AUX/RECEIVER/COMPUTER/Blu-ray/CAMERA/DVD REC/
HOME THTR/MONITOR/MEDIA CTR/MEDIA EXT/OTHER
  For the PC terminal, only “SKIP” is available.
*  If “SKIP” is selected, the INPUT button press will skip its input.
 Each selected label will be displayed on “Input select” screen. (\
p. 32)
■ Press to exit from 
a menu screen
Display menu
Select “Setup”
Menu
Picture
Audio
Timer
Lock
VIERA Link
SD card
Closed caption
Setup
 next
 select
Select “Input labels”
Setup 1/2
Clock
ANT/Cable setup
Input labels
Anti image retention
Remote control registration Language
All
Channel surf mode
 next
 select 
						

							6061
Advanced
 Remote control registration
 Using Timer
Using Timer
The TV can automatically turn On/Off at the designated date and time.
 The Clock must be set before On time/Off time settings. (p. 24)
 The “Sleep” timer and “On / Off timer” will not work if the “Auto power on” (p. 42) is set.\
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
Note
 The  TV  automatically turns Off after 90 
minutes when turned 
On by the Timer. 
This operation will be 
cancelled if the Off 
time is selected or if a 
key is pressed.
Display menu
Select “Timer”
Menu
VIERA Link Picture
Audio
Timer
Lock
SD card
Closed caption
 next
 select
Select the timer to set
Timer
Sleep
Timer 1
Timer 2
Timer 3
Timer 4
Timer 5
 select
 next
Turns Off automatically
Sleep
Turns On/Off automatically
(5 timers can be set.)
Timer 1
Timer 5
~
Set the timer
■ To set “Sleep” (Off Timer)
  Set to shut the unit off after a pre-selected amount of time.
 
60SleepSleep (minutes)set
 0/30/60/90  (minutes)
■ To set “Timer 1-5” (On/Off Timer)
  Select the item and set
 
On
TV
10-3
7/6[FRI]
  1:15 AM
12:45 AM
Timer 1Timer set
Inputs
Channel
Day
On time
Off time
 select
 
setor
SUN/MON/TUE/WED/THU/FRI/SAT
(displays the nearest future date) 
MON-FRI/SAT-SUN/DAILY/Every SUN/Every MON/
Every TUE/Every WED/Every THU/Every FRI/ Every SAT
Select the channel
Channel
Select the day
Day
The time to turn On
On time
The time to turn Off
Off time Select the inputs
Inputs AM / PM
Timer setting (On/Off)
Timer set
Clear
Remote control registration
CHS VIDEOVIDEO VIDEO IN 2
L-AUDIO-R
VOLINPUT/OKMENU
POWER
or
Display “Remote control registration”
Menu
Picture
Audio
VIERA Link
SD card
Closed caption
Setup
Setup
1/2
Clock
ANT/Cable setup
Input labels
Anti image retention
Remote control registration Language
All
Channel surf mode
 
next
 select
or
(Tuner Box)
CH
VOLINPUT/OKMENUPress MENU key for 3 seconds.
Select “Yes”
[Registered remote control: 5 or less]
Remote control registration.
2* of 5 remotes registered.
Register additional remote control?
Ye s No
(example)
 select
 ok
 Return to “Setup” selecting “No”.
*:  Number of registered  remote controls
[Registered remote controls: 5 ]
Remote control registration
Maximum 5 of 5 remotes registered.
NOTE: If you wish to register another remote control, 
all existing remote control registrations will be erased.
Continue to register another remote control?
Ye s No
Press the ‘OK’ button and the ‘1’ button  simultaneously 
for at least 3 seconds.
Remote control registration
Press the ‘OK’ button and the ‘1’ button 
simultaneously for at least 3 seconds.
VIERACASTVIERATOOLSVIERALink
Error or
Time out (30 sec)
Remote control registration failed.
Try registering again?CH
VOLINPUT/O KMENU
Select 
“Yes” Return to “Setup” selecting 
“No”.
Succeed
Remote control registration
completed successfully.
Press OK.
ok
Remote control registration can be set on the “Setup” screen.