Panasonic 54"class 1080p Plasma Hdtv Tc P54z1 Operating Instructions

							4041
Advanced
 How to Use Menu Functions(picture, sound quality, etc.)
Menu Item Adjustments/Configurations (alternatives)
Picture
Reset to defaultsResets all picture adjustments to factory default settings except for “\
Advanced picture”.Reset to defaults
Picture modeBasic picture mode 
(Vivid/Standard/Studio ref/THX/Game/Custom)  (p. 66)Picture modeVivid
Contrast, Brightness,
Color, Tint, Sharpness
Adjusts color, brightness, etc. for each picture mode to suit your taste
• Display range
  Contrast/Brightness/Color/Sharpness:  0 - 100
  Tint:            -50 - +50Contrast+20
Brightness0
Color0
Tint0
Sharpness0
Color temp.Selects a choice of Cool(blue), Normal, or Warm(red) color.  (Cool 2/Cool 1/Normal/Warm 1/Warm 2)Color temp.Normal
Color mgmt.On:  Enhances green and blue color reproduction, especially outdoor scen\
es.  (On/Off) Color mgmt.On
x.v.ColorAuto:  Provide the appropriate picture when images corresponding to “x.v.Color” are input via the HDMI input of this TV.  (Off/Auto) x.v.ColorAuto
C.A.T.S.Adjusts the brightness and gradation according to the ambient lighting c\
ondition. (Off/On)C.A.T.S.Off
Video NRReduces noise, commonly called snow. Leave it off when receiving a strong signal.  (Off/Weak/Medium/Strong)Video NROff
Pro settingAdjust the “Picture mode” setting in more detail. (p. 66)
(This setting can be adjusted only when “Custom” or ”Photo”\
 is selected.)Pro setting
Zoom adjustmentsAdjusts vertical alignment and size when aspect setting is “ZOOM” \
(p. 64)Zoom adjustments
PC adjustmentsSets PC display (p. 38)PC adjustments
Advanced picture
3D Y/C filter Minimizes noise and cross-color in the picture. (On/Off) 3D Y/C filterOn
Color matrix
Selects image resolution of component-connected devices  (HD/SD)
• SD:  Standard Definition       HD:  High Definition
• Only 480p signal accepted; regular TV (NTSC) is not available.Color matrixSD
Block NRReduces noise of specific digital signals of DVD, STB, etc. (On/Off)Block NROff
Mosquito NRReduces HDTV flicker noise in the contoured sections of an image  (Off/On)Mosquito NROff
Black levelSelects Dark or Light. Valid only for external input signals. (Dark/Light)Black levelLight
3:2 pulldownAdjust the picture recorded in 24 fps for optimum quality. (On/Off)3:2 pulldownOff
24p Direct in
96Hz/48Hz:  Achieves more cinematic playback by reproducing the movie contents at 2 \
or 4 times the 
speed of 24 frames per second.  (96Hz/60Hz/48Hz)
• If flicker is seen using 48Hz, please use 60Hz or 96Hz.
• If you use the Wireless Unit system and select 24p Direct in 48Hz or 96H\
z, the link between the transmitter 
and receiver may disconnect and reconnect causing the picture to briefly\
 drop out when the signal changes 
between 1080/24p and another format, i.e. 1080/60p, 1080/60i, 720/60p. This is normal operation.24p Direct in60 Hz
HD size
Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning are\
a with High-definition signal.  (Size 1/ Size 2)Select “Size 1” if noise is generated on the edges of the screen.
• Size 1: Selected item for “HD size”. Scanning 95%
• Size 2: Selected item for “HD size”. Scanning 100%
HD sizeSize1
H sizeAdjust horizontal display range to reduce noise of both side edges of an\
 image. (Size 1/Size 2)
Size 2: Adjust image size according to aspect mode for reducing noise. (p. 67)\
H sizeSize 1
Audio
Reset to defaultsResets Bass, Treble and Balance adjustments to factory default settings.Reset to defaults
BassIncreases or decreases the bass response.Bass0
TrebleIncreases or decreases the treble response.Tr e b l e0
BalanceEmphasizes the left / right speaker volume.Balance0
Advanced audio
A.I. soundEqualizes overall volume levels across all channels and external inputs.\
  (On/Off)A.I. soundOn
BBE ViVA
BBE ViVA HD3D (High-Definition 3D) Sound provides musically accurate natural 3\
D image with Hi-Fi sound. The clarity of the sound 
is improved by BBE while the width, depth and height of sound image are \
expanded by BBE’s proprietary 3D sound process. BBE 
ViVA HD3D Sound is compatible with all TV programs including news, music, dramas, movies, sports and electronic\
 games.  (On/Off)BBE ViVAOn
BBEBBE High Definition Sound restores clarity and presence for better speec\
h intelligibility and musical realism. (On/Off)BBEOn
SurroundEnhances audio response when listening to stereo. (On/Off)SurroundOff
Volume levelerMinimizes volume disparity after switching to external inputs.Volume leveler0
TV speakersSwitch to “Off” when using external speakers (On/Off)
• “A.I. sound”, “BBE ViVA”, “BBE”, “Surround” and “Volume leveler” do not work if “Off” is selected.TV speakersOn
HDMI 1 in, HDMI 2 in, 
HDMI 3 in, HDMI 4 inThe default setting is “Digital” for HDMI connection. (Digital in\
put signal) 
Select audio input terminal when DVI cable is connected. (Analog audio \
input 
signal) (Digital/Component 1/Component 2/Video 1/Video 2)HDMI1 inDigital
HDMI2 inDigital
HDMI3 inDigital
HDMI4 inDigital
TimerSleep, Timer 1-5The TV can automatically turn On/Off at the designated date and time (p. 60)
LockLocks the channels and programs (p. 54)VIERA 
LinkRecord now 
Stop recording 
VIERA Link control 
Speaker output[Record now/Stop recording]  Records programs on the recorder immediately with the TV’s remote control (p. 48-49).[VIERA Link control] Selects equipment to access and operate.  (Recorder/Home theater/Player/Camcorder/LUMIX/Network Camera)  (p. 48-49)[Speaker output] Selects an audio output. (Home theater/TV) (p. 48-49)
• VIERA Link menu is accessible directly by pressing the VIERA Link button on the remote control.   (p. 48)
SD cardSD card[Photo viewer] To view the still picture. (p. 30)
[Movie player] To view moving pictures recorded in MPEG 2 or AVCHD format. (p. 28)SD card
Closed 
captionClosed captionDisplays subtitles (Closed caption) (p. 58)Closed caption
 In AV mode, the Audio menu and Setup menu give fewer options.
■ Menu list
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
 
Display menu
 Displays the functions that can be set  (varies depending on the input signal)
Select the menu
Menu
VIERA Link Picture
Audio
Timer
Lock
SD card
Closed caption
Setup
 select
 next
Select the item
0
0
0
0
0
Vivid
Picture 1/3
Brightness
Color
Tint
Sharpness Picture mode
Contrast Reset to defaults
(example:  Picture menu)
select
Adjust or select
0
0
0
0
0
Vivid
Picture1/3
Brightness
Color
Tint
Sharpness Picture mode
Contrast Reset to defaults
(example:  Picture menu)
adjust
or 
select
How to Use Menu Functions 
						

							4243
Advanced
 How to Use Menu Functions(picture, sound quality, etc.)
Menu Item Adjustments/Configurations (alternatives)
Setup 
SUB MENUChannel surf modeSets the mode to select the channel with Channel up/down button  (All/Favorite/Digital only/Analog only)
Set favoriteSets favorite channels. (p. 26)
Edit CH captionChanges the station identifier. (p. 57)
Signal meterChecks the signal strength if interference or freezing occurs on a digit\
al image. (p. 57)
MenuItem Adjustments/Configurations (alternatives)
Setup
Channel surf mode
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital only/Analog only)
• Favorite: Only channels registered as FAVORITE (p. 26)
Channel surf mode
All
LanguageSelects the screen menu language (p. 22)Language
ClockAdjusts the clock (p. 24)Clock
ANT/Cable setupSets channels (p. 56)ANT/Cable setup
Input labelsSelects the terminal and label of the external equipment (p. 59)Input labels
Anti Image 
retentionPixel orbiter
Prevents “Image retention” with Wobbling. ( Automatic/Periodic)
• Automatic: Shifts the display image automatically.
• Periodic:  Shifts the display image every (1/2/3/4) minutes according to what was\
 set in the “Time (minutes)” menu.
Pixel orbiterAutomatic
Time (minutes)Sets the time for “Pixel orbiter-Periodic” setting.  (1/2/3/4)Time (minutes)4
4:3 side barsChange the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
• The recommended setting is “Bright” to prevent panel “Image ret\
ention”. (p. 67)4:3 side barsBright
Scrolling barPress “OK” to start “Scrolling” on the screen (p. 67)Scrolling bar
Remote control registrationPress “OK” to start the Remote control registration process. (p. \
61)Remote control registration
VIERA Link settingsVIERA Link
Controls equipment connected to HDMI terminals (p. 46)  (On/Off)
• “Power off link”, “Power on link”, “Stand-by power save”, “Auto\
 power stand-by” and “Default speakers” 
cannot be selected if “Off” is set.VIERA LinkOn
Power on linkSets “Power on link” of HDMI connection equipment (p. 46)  (Yes/No)Power on linkYe s
Power off linkSets “Power off link” of HDMI connection equipment (p. 46) (Yes/No)Power off linkYe s
Stand-by power 
saveSet “Stand-by power save” on HDMI connection equipment. (p. 46) \
 (No/Yes)Stand-by power save
No
Auto power 
stand-bySet “Auto power stand-by” of HDMI connection equipment. (p. 46) \
(No/Yes (with reminder)/Yes (no reminder)Auto power stand-by
No
Default speakersSelects the default speakers (p. 46) (TV/Theater)Default speakersTV
Network settingSets Network setting (p. 50)Network setting
VIERA CAST settingSets VIERA CAST setting (p. 52)VIERA CAST setting
Network cameras listSet Network Camera status. (Search/Registration/Connection/Deleting/Def\
ault setting etc.) (p. 37)Network cameras list
ECO/energy saving
No signal for 10 
minutes
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed 
for more than 10 minutes. (Enable/Disable)
Note
• Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode” or Digital channel. 
• “No signal for 10 minutes was activated” will be displayed for abo\
ut 10 seconds when the TV is turned 
on for the first time after turning the power off by “No signal for 10 minutes”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes prior to the shut-off.
No signal for 10 minutes
Enable
No activity for 3 
hours
To conserve energy, the TV automatically turns off when no operation of remote or side panel key 
continues for more than 3 hours. (Enable/Disable)
Note
• Not in use when setting “Auto power on”, “On/Off Timer” or PC input display.
• “No activity for 3 hours was activated” will be displayed for abou\
t 10 seconds when the TV is turned on 
for the first time after turning the power off by “No activity for 3 hours”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes prior to the shut-off.
No activity for 3 hours
Disable
Advanced setup
Auto power on
Turns TV On automatically when the cable box or a connected device is turned O\
n.  (No/Yes)
TV AC cord must be plugged into this device. TV comes on every time the power is restored.
• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto \
power on” is set. (p. 60)Auto power onNo
SD card LEDSet to “On”, if you want to light SD card LED while SD card is ins\
erted.  (On/Off )SD card LEDOn
Play SD card 
automaticallySet “Movie”, “Thumbnail” or “Slideshow” to play back S\
D cards automatically. 
(Slideshow/Thumbnail/Movie/Set later/Off)Play SD card automatically
Set later
AboutDisplays TV version and software license.About
Reset to defaultsPerforming Reset will clear all items set with Setup, such as channel se\
ttings. (p. 56)Reset to defaults
How to Use Menu Functions (Continued)
■ Menu list
■ Sub menu list
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
 
Display menu
 Displays the functions that can be set 
(varies depending on the input signal)
Select “Setup”
Menu
Picture
Audio
Timer
Lock
VIERA Link
SD card
Closed caption
Setup
 next
 select
Select the item
All
Setup 1/2
Clock
ANT/Cable setup
Input labels
Anti image retention
Remote control registration Language Channel surf mode
 next
 select
Display Sub Menu
SUBMENU
Select the item
All
Setup SUB MENU
Edit CH caption
Signal meter Set favorite
Channel surf mode
 select
 set
 or
 next 
						

							4243
Advanced
 How to Use Menu Functions(picture, sound quality, etc.)
Menu Item Adjustments/Configurations (alternatives)
Setup 
SUB MENUChannel surf modeSets the mode to select the channel with Channel up/down button  (All/Favorite/Digital only/Analog only)
Set favoriteSets favorite channels. (p. 26)
Edit CH captionChanges the station identifier. (p. 57)
Signal meterChecks the signal strength if interference or freezing occurs on a digit\
al image. (p. 57)
MenuItem Adjustments/Configurations (alternatives)
Setup
Channel surf mode
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital only/Analog only)
• Favorite: Only channels registered as FAVORITE (p. 26)
Channel surf mode
All
LanguageSelects the screen menu language (p. 22)Language
ClockAdjusts the clock (p. 24)Clock
ANT/Cable setupSets channels (p. 56)ANT/Cable setup
Input labelsSelects the terminal and label of the external equipment (p. 59)Input labels
Anti Image 
retentionPixel orbiter
Prevents “Image retention” with Wobbling. ( Automatic/Periodic)
• Automatic: Shifts the display image automatically.
• Periodic:  Shifts the display image every (1/2/3/4) minutes according to what was\
 set in the “Time (minutes)” menu.
Pixel orbiterAutomatic
Time (minutes)Sets the time for “Pixel orbiter-Periodic” setting.  (1/2/3/4)Time (minutes)4
4:3 side barsChange the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
• The recommended setting is “Bright” to prevent panel “Image ret\
ention”. (p. 67)4:3 side barsBright
Scrolling barPress “OK” to start “Scrolling” on the screen (p. 67)Scrolling bar
Remote control registrationPress “OK” to start the Remote control registration process. (p. \
61)Remote control registration
VIERA Link settingsVIERA Link
Controls equipment connected to HDMI terminals (p. 46)  (On/Off)
• “Power off link”, “Power on link”, “Stand-by power save”, “Auto\
 power stand-by” and “Default speakers” 
cannot be selected if “Off” is set.VIERA LinkOn
Power on linkSets “Power on link” of HDMI connection equipment (p. 46)  (Yes/No)Power on linkYe s
Power off linkSets “Power off link” of HDMI connection equipment (p. 46) (Yes/No)Power off linkYe s
Stand-by power 
saveSet “Stand-by power save” on HDMI connection equipment. (p. 46) \
 (No/Yes)Stand-by power save
No
Auto power 
stand-bySet “Auto power stand-by” of HDMI connection equipment. (p. 46) \
(No/Yes (with reminder)/Yes (no reminder)Auto power stand-by
No
Default speakersSelects the default speakers (p. 46) (TV/Theater)Default speakersTV
Network settingSets Network setting (p. 50)Network setting
VIERA CAST settingSets VIERA CAST setting (p. 52)VIERA CAST setting
Network cameras listSet Network Camera status. (Search/Registration/Connection/Deleting/Def\
ault setting etc.) (p. 37)Network cameras list
ECO/energy saving
No signal for 10 
minutes
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed 
for more than 10 minutes. (Enable/Disable)
Note
• Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode” or Digital channel. 
• “No signal for 10 minutes was activated” will be displayed for abo\
ut 10 seconds when the TV is turned 
on for the first time after turning the power off by “No signal for 10 minutes”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes prior to the shut-off.
No signal for 10 minutes
Enable
No activity for 3 
hours
To conserve energy, the TV automatically turns off when no operation of remote or side panel key 
continues for more than 3 hours. (Enable/Disable)
Note
• Not in use when setting “Auto power on”, “On/Off Timer” or PC input display.
• “No activity for 3 hours was activated” will be displayed for abou\
t 10 seconds when the TV is turned on 
for the first time after turning the power off by “No activity for 3 hours”.
• The on-screen display will flash 3, 2 and 1 to indicate the last three (\
3) remaining minutes prior to the shut-off.
No activity for 3 hours
Disable
Advanced setup
Auto power on
Turns TV On automatically when the cable box or a connected device is turned O\
n.  (No/Yes)
TV AC cord must be plugged into this device. TV comes on every time the power is restored.
• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto \
power on” is set. (p. 60)Auto power onNo
SD card LEDSet to “On”, if you want to light SD card LED while SD card is ins\
erted.  (On/Off )SD card LEDOn
Play SD card 
automaticallySet “Movie”, “Thumbnail” or “Slideshow” to play back S\
D cards automatically. 
(Slideshow/Thumbnail/Movie/Set later/Off)Play SD card automatically
Set later
AboutDisplays TV version and software license.About
Reset to defaultsPerforming Reset will clear all items set with Setup, such as channel se\
ttings. (p. 56)Reset to defaults
How to Use Menu Functions (Continued)
■ Menu list
■ Sub menu list
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
 
Display menu
 Displays the functions that can be set 
(varies depending on the input signal)
Select “Setup”
Menu
Picture
Audio
Timer
Lock
VIERA Link
SD card
Closed caption
Setup
 next
 select
Select the item
All
Setup 1/2
Clock
ANT/Cable setup
Input labels
Anti image retention
Remote control registration Language Channel surf mode
 next
 select
Display Sub Menu
SUBMENU
Select the item
All
Setup SUB MENU
Edit CH caption
Signal meter Set favorite
Channel surf mode
 select
 set
 or
 next 
						

							4445
Advanced
 VIERA Link
TM
 “HDAVI Control
TM
”
AV IN
AV IN
VIERA Link
TM
 “HDAVI Control
TM
”
Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote.
Enjoy additional HDMI Inter-Operability with Panasonic products which ha\
ve the “HDAVI Control” function.
This TV supports “HDAVI Control 4” function.
Connections to the equipment (DVD recorder DIGA, HD Camcorder, Player theatre, RAM theater, Amplifier, etc.) with 
HDMI cables allow you to interface with them automatically.
Equipment with the “HDAVI Control” function enables the following operations:
■ For the first time/When adding new equipment, reconnecting equipment or \
changing the setup 
after the connection, turn the equipment on and then switch the TV on. S\
et the input mode to 
HDMI1, HDMI2, HDMI3 or HDMI4 (p. 32), and make sure that the image is \
displayed correctly.
VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is\
 an industry standard known 
as HDMI CEC (Consumer Electronics Control), is a unique function that \
we have developed and added. As such, its 
operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
Please refer to the individual manuals for other manufacturers’ equipment supporting the VIERA Link function.Version
Operations
HDAVI Control or later
• Automatic Input Switching (p. 47)
• Power on link (p. 47)
• Power off link (p. 47)
• Default speakers (p. 47)
• One-touch theater playback (p. 47)
• Speaker control (p. 49)
HDAVI Control 2 or later
• VIERA Link control only with the TV’s remote control(P. 49) 
• Auto power stand-by (for available equipment only) (p. 47)
HDAVI Control 3 or later
• Providing the setting information (p. 47)
• Automatic lip-sync function (p. 47)
• Direct TV Recording (p. 49)
HDAVI Control 4
• Stand-by power save (with quick start mode) (p. 47)
■ HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-co\
mpliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. Recommended part number:
RP-CDHF15 (4.9 ft/1.5 m), RP-CDHG15 (4.9 ft/1.5 m), RP-CDHF30 (9.8 \
ft/3.0 m),
RP-CDHG30 (9.8 ft/3.0 m), RP-CDHG50 (16.4 ft/5.0 m)
 * For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
VIERA LinkTM Connections
Follow the connection diagrams below for HDAVI control 
of a single piece of AV equipment such as a DVD recorder 
(DIGA), RAM theater, or Player theater system.
Refer to page 46-49 for Setup Menu settings and additional 
control information.
•  Optional HDMI and/or optical cables are not included. If connection (or setting) of equipment compatible with 
HDAVI control is changed, switch the power of this unit Off 
and On again while the power of all equipment is On (so that 
the unit can correctly recognize the connected equipment) 
and check that the DVD recorder (DIGA), RAM theater, and 
Player theater playback operate.
Note
 HDMI 1 is recommended.
  When connecting to HDMI 2/HDMI 3/HDMI 4, set the input mode to HDMI 2/HD\
MI 3/HDMI 4 (p. 32) initially before  connecting to HDMI 2/HDMI 3/HDMI 4. After connection, confirm the HDMI control functions (p. 46-49).
■ Connecting this unit to the DVD recorder (DIGA), RAM 
theater, or Player theater
 For DVD recorder (DIGA):  Connect with HDMI cable
 For RAM theater and Player theater: 
  Connect with the HDMI and audio cables.
  If audio cable is not connected, you cannot listen to the TV program  through the theater system.
■ Connecting this unit to a DVD 
recorder (DIGA) and AV amp
  When using a “VIERA Link” audio-
video amplifier and a compatible DVD 
recorder (DIGA) use a daisy chain 
connection as shown below.
 One AV amp and one DVD recorder (DIGA) can be operated with this unit.
 Be sure to connect the AV amp between this unit and the DVD recorder (DIGA).
■ Setting of this unit after connection
  After making connections as shown above, set “VIERA Link” (under “VIERA Link settings”) to “On” using the Setup 
menu. (p. 33, 46-47).
Note
 Individual HDMI equipment may require additional menu settings specific \
to each model. Please refer to their  respective operating instruction manuals.
 When audio from other equipment connected to this unit via HDMI is outpu\
t using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.
  (When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
 For details about HDMI cable for connecting Panasonic HD camcorder, read the manual for the equipment.
HDMI cable
HDMI
(AV OUT)
HDMI
(AV OUT)
Home theater systems 
with VIERA Link 
function oror
HDMI
(AV IN)
AV amp with VIERA 
Link function DVD recorder (DIGA) 
with VIERA Link 
function
HD Camcorder 
with VIERA Link 
function
HDMI
(AV OUT)Digital Audio  out
HDMI
(AV OUT)
DVD recorder (DIGA) 
with VIERA Link 
function or
Back of the TV
or
HDMI
(AV OUT)
LUMIX 
with VIERA 
Link function oror 
						

							4445
Advanced
 VIERA Link
TM
 “HDAVI Control
TM
”
AV IN
AV IN
VIERA Link
TM
 “HDAVI Control
TM
”
Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote.
Enjoy additional HDMI Inter-Operability with Panasonic products which ha\
ve the “HDAVI Control” function.
This TV supports “HDAVI Control 4” function.
Connections to the equipment (DVD recorder DIGA, HD Camcorder, Player theatre, RAM theater, Amplifier, etc.) with 
HDMI cables allow you to interface with them automatically.
Equipment with the “HDAVI Control” function enables the following operations:
■ For the first time/When adding new equipment, reconnecting equipment or \
changing the setup 
after the connection, turn the equipment on and then switch the TV on. S\
et the input mode to 
HDMI1, HDMI2, HDMI3 or HDMI4 (p. 32), and make sure that the image is \
displayed correctly.
VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is\
 an industry standard known 
as HDMI CEC (Consumer Electronics Control), is a unique function that \
we have developed and added. As such, its 
operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
Please refer to the individual manuals for other manufacturers’ equipment supporting the VIERA Link function.Version
Operations
HDAVI Control or later
• Automatic Input Switching (p. 47)
• Power on link (p. 47)
• Power off link (p. 47)
• Default speakers (p. 47)
• One-touch theater playback (p. 47)
• Speaker control (p. 49)
HDAVI Control 2 or later
• VIERA Link control only with the TV’s remote control(P. 49) 
• Auto power stand-by (for available equipment only) (p. 47)
HDAVI Control 3 or later
• Providing the setting information (p. 47)
• Automatic lip-sync function (p. 47)
• Direct TV Recording (p. 49)
HDAVI Control 4
• Stand-by power save (with quick start mode) (p. 47)
■ HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-co\
mpliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. Recommended part number:
RP-CDHF15 (4.9 ft/1.5 m), RP-CDHG15 (4.9 ft/1.5 m), RP-CDHF30 (9.8 \
ft/3.0 m),
RP-CDHG30 (9.8 ft/3.0 m), RP-CDHG50 (16.4 ft/5.0 m)
 * For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
VIERA LinkTM Connections
Follow the connection diagrams below for HDAVI control 
of a single piece of AV equipment such as a DVD recorder 
(DIGA), RAM theater, or Player theater system.
Refer to page 46-49 for Setup Menu settings and additional 
control information.
•  Optional HDMI and/or optical cables are not included. If connection (or setting) of equipment compatible with 
HDAVI control is changed, switch the power of this unit Off 
and On again while the power of all equipment is On (so that 
the unit can correctly recognize the connected equipment) 
and check that the DVD recorder (DIGA), RAM theater, and 
Player theater playback operate.
Note
 HDMI 1 is recommended.
  When connecting to HDMI 2/HDMI 3/HDMI 4, set the input mode to HDMI 2/HD\
MI 3/HDMI 4 (p. 32) initially before  connecting to HDMI 2/HDMI 3/HDMI 4. After connection, confirm the HDMI control functions (p. 46-49).
■ Connecting this unit to the DVD recorder (DIGA), RAM 
theater, or Player theater
 For DVD recorder (DIGA):  Connect with HDMI cable
 For RAM theater and Player theater: 
  Connect with the HDMI and audio cables.
  If audio cable is not connected, you cannot listen to the TV program  through the theater system.
■ Connecting this unit to a DVD 
recorder (DIGA) and AV amp
  When using a “VIERA Link” audio-
video amplifier and a compatible DVD 
recorder (DIGA) use a daisy chain 
connection as shown below.
 One AV amp and one DVD recorder (DIGA) can be operated with this unit.
 Be sure to connect the AV amp between this unit and the DVD recorder (DIGA).
■ Setting of this unit after connection
  After making connections as shown above, set “VIERA Link” (under “VIERA Link settings”) to “On” using the Setup 
menu. (p. 33, 46-47).
Note
 Individual HDMI equipment may require additional menu settings specific \
to each model. Please refer to their  respective operating instruction manuals.
 When audio from other equipment connected to this unit via HDMI is outpu\
t using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.
  (When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
 For details about HDMI cable for connecting Panasonic HD camcorder, read the manual for the equipment.
HDMI cable
HDMI
(AV OUT)
HDMI
(AV OUT)
Home theater systems 
with VIERA Link 
function oror
HDMI
(AV IN)
AV amp with VIERA 
Link function DVD recorder (DIGA) 
with VIERA Link 
function
HD Camcorder 
with VIERA Link 
function
HDMI
(AV OUT)Digital Audio  out
HDMI
(AV OUT)
DVD recorder (DIGA) 
with VIERA Link 
function or
Back of the TV
or
HDMI
(AV OUT)
LUMIX 
with VIERA 
Link function oror 
						

							4647
Advanced
 VIERA Link
TM
 “HDAVI Control
TM
”
VIERA Link
TM
 “HDAVI Control
TM
” (Continued)
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
Display menu
Select “Setup”
Menu
Picture
Audio
VIERA Link
SD card
Closed caption
Setup
 select
 next
Select “VIERA Link settings”
Setup2/2
VIERA CAST setting
About VIERA Link settings
Network setting
 select
 next
Select “VIERA Link”
On
Ye s
Ye s
TV
No
No
VIERA Link settings
VIERA Link
Power on link
Power off link
Default speakers
Stand-by power save
Auto power stand-by
select
Select “On”
(default is On)change
Select settings
On
Ye s
Ye s
TV
No
No
VIERA Link settings
VIERA Link
Power on link
Power off link
Default speakers
Stand-by power save
Auto power stand-by
select
Set
On
Ye s
Ye s
Theater
No
No
VIERA Link settings
VIERA Link
Power on link
Power off link
Default speakers
Stand-by power save
Auto power stand-by
change
Automatic
Input
SwitchingAt the start of the DIGA, Player theater, or RAM theater playback, the TV’s input automatically switches to the input 
based on the playback equipment.
 For the RAM theater, the speakers automatically switch to the theater system.
If using the DIGA operation, the TV’s input automatically switches to the DIGA and DIGA menu is displayed. 
Power on 
linkWhen “Yes” is selected (p. 43), TV is turned on automatically and switches to the appropriate HDMI input\
 whenever 
VIERA Link compatible equipment is initially turned on and Play mode is selec\
ted. 
Power off 
linkWhen “Yes” is selected (p. 43) and the TV is turned off, all connected VIERA Link compatible equipment is also 
automatically turned off. 
 DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.
Caution:  The TV remains on even if the VIERA Link compatible equipment is turned off.
Stand-by 
power save 
(for “HDAVI 
Control 4” (with 
Quick Start 
Mode))
 Condition
  Power off link: Yes
  Stand-by power save: Yes
  The equipment has “HDAVI Control 4 (with Quick Start Mode)” connected with HDMI cable.
When TV is turned off, all connected VIERA Link compatible equipment is moved to ECO standby mode* 
automatically under above conditions.
 * Minimum power consumption of standby condition for the equipment.
Auto power 
save 
(for 
“HDAVI Control 
2 or later”)
 Condition
  Auto power stand-by: Yes
   The equipment has “HDAVI Control 2 or later” (for available equipment only) connected wit\
h HDMI cable.
[ Examples of timing for operation ]
• When the input is switched from HDMI.
• When the “Speaker output” is changed from “Home theater”\
 to “TV”.
The connected VIERA Link compatible equipment will be turned off automatically when not in use.
Default
speakers“TV” is the default setting. To set the Home Theater system as default speakers, change the default speakers 
setting from “TV” to “Theater”. Sound will be output from th\
e Home Theater whenever the TV is powered on.
One-touch
theater
playbackIf the “ONE TOUCH PLAY” key is pressed on the remote control for Panasonic Home Theater system, the following
sequence of operations is performed automatically.
  Home Theater power switches On, and playback begins.
 TV power switches On, and the playback screen is displayed.
 Audio is muted on the TV and switches to the theater system.
Providing 
the setting 
information
(for “HDAVI 
Control 3 or 
later”)
The following information about the TV settings can be transmitted to each piece of equipment (Recorder/Hom\
e 
theater/Player) that has “HDAVI Control 3 or later” function connected to a TV with HDMI cable.
Transmittable data Recorder Home theater Player
  On Screen Display Language setting 
(English/Español/Français)○○○
  Panel Aspect  Ratio
(16:9 fixed)○○○
  Closed caption information 
(Mode/CC type/Digital setting)○--- ---
  Channel information 
(Input signal/Channel list/Caption information)○--- ---
Note
 There is a possibility that all the GUI language information might be se\
t from equipment that has HDMI CEC 
function connected to TV with HDMI cable. Depending on operating conditions or the specificati\
on for each piece 
of equipment the setting may or may not be applied.
 For more details on the external equipment’s operation, please refer to the operating manuals for the equipment.
[For Recorder]
 You cannot operate other functions while transmitting TV’s information above except Power On/Off key operation. 
When you turn off this unit, the transmission will be interrupted (only when you are tr\
ansmitting 
 Channel information).
Automatic lip-
sync function 
(for “HDAVI 
Control 3 or later”)
Minimizes lip-sync delays between the picture and audio when you connect\
 to a Panasonic theater system or 
Amplifier. 
						

							4647
Advanced
 VIERA Link
TM
 “HDAVI Control
TM
”
VIERA Link
TM
 “HDAVI Control
TM
” (Continued)
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
Display menu
Select “Setup”
Menu
Picture
Audio
VIERA Link
SD card
Closed caption
Setup
 select
 next
Select “VIERA Link settings”
Setup2/2
VIERA CAST setting
About VIERA Link settings
Network setting
 select
 next
Select “VIERA Link”
On
Ye s
Ye s
TV
No
No
VIERA Link settings
VIERA Link
Power on link
Power off link
Default speakers
Stand-by power save
Auto power stand-by
select
Select “On”
(default is On)change
Select settings
On
Ye s
Ye s
TV
No
No
VIERA Link settings
VIERA Link
Power on link
Power off link
Default speakers
Stand-by power save
Auto power stand-by
select
Set
On
Ye s
Ye s
Theater
No
No
VIERA Link settings
VIERA Link
Power on link
Power off link
Default speakers
Stand-by power save
Auto power stand-by
change
Automatic
Input
SwitchingAt the start of the DIGA, Player theater, or RAM theater playback, the TV’s input automatically switches to the input 
based on the playback equipment.
 For the RAM theater, the speakers automatically switch to the theater system.
If using the DIGA operation, the TV’s input automatically switches to the DIGA and DIGA menu is displayed. 
Power on 
linkWhen “Yes” is selected (p. 43), TV is turned on automatically and switches to the appropriate HDMI input\
 whenever 
VIERA Link compatible equipment is initially turned on and Play mode is selec\
ted. 
Power off 
linkWhen “Yes” is selected (p. 43) and the TV is turned off, all connected VIERA Link compatible equipment is also 
automatically turned off. 
 DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.
Caution:  The TV remains on even if the VIERA Link compatible equipment is turned off.
Stand-by 
power save 
(for “HDAVI 
Control 4” (with 
Quick Start 
Mode))
 Condition
  Power off link: Yes
  Stand-by power save: Yes
  The equipment has “HDAVI Control 4 (with Quick Start Mode)” connected with HDMI cable.
When TV is turned off, all connected VIERA Link compatible equipment is moved to ECO standby mode* 
automatically under above conditions.
 * Minimum power consumption of standby condition for the equipment.
Auto power 
save 
(for 
“HDAVI Control 
2 or later”)
 Condition
  Auto power stand-by: Yes
   The equipment has “HDAVI Control 2 or later” (for available equipment only) connected wit\
h HDMI cable.
[ Examples of timing for operation ]
• When the input is switched from HDMI.
• When the “Speaker output” is changed from “Home theater”\
 to “TV”.
The connected VIERA Link compatible equipment will be turned off automatically when not in use.
Default
speakers“TV” is the default setting. To set the Home Theater system as default speakers, change the default speakers 
setting from “TV” to “Theater”. Sound will be output from th\
e Home Theater whenever the TV is powered on.
One-touch
theater
playbackIf the “ONE TOUCH PLAY” key is pressed on the remote control for Panasonic Home Theater system, the following
sequence of operations is performed automatically.
  Home Theater power switches On, and playback begins.
 TV power switches On, and the playback screen is displayed.
 Audio is muted on the TV and switches to the theater system.
Providing 
the setting 
information
(for “HDAVI 
Control 3 or 
later”)
The following information about the TV settings can be transmitted to each piece of equipment (Recorder/Hom\
e 
theater/Player) that has “HDAVI Control 3 or later” function connected to a TV with HDMI cable.
Transmittable data Recorder Home theater Player
  On Screen Display Language setting 
(English/Español/Français)○○○
  Panel Aspect  Ratio
(16:9 fixed)○○○
  Closed caption information 
(Mode/CC type/Digital setting)○--- ---
  Channel information 
(Input signal/Channel list/Caption information)○--- ---
Note
 There is a possibility that all the GUI language information might be se\
t from equipment that has HDMI CEC 
function connected to TV with HDMI cable. Depending on operating conditions or the specificati\
on for each piece 
of equipment the setting may or may not be applied.
 For more details on the external equipment’s operation, please refer to the operating manuals for the equipment.
[For Recorder]
 You cannot operate other functions while transmitting TV’s information above except Power On/Off key operation. 
When you turn off this unit, the transmission will be interrupted (only when you are tr\
ansmitting 
 Channel information).
Automatic lip-
sync function 
(for “HDAVI 
Control 3 or later”)
Minimizes lip-sync delays between the picture and audio when you connect\
 to a Panasonic theater system or 
Amplifier. 
						

							4849
Advanced
 VIERA Link
TM
 “HDAVI Control
TM
”
VIERA Link
TM
 “HDAVI Control
TM
” (Continued)
You can enjoy more convenient operation with the “HDAVI Control” function in the “VIERA Link” 
menu.
For more details on the “HDAVI Control” function, refer to p. 44
VIERATOOLSVIERALink
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
Display VIERA Link menu
Select the item
Recorder
TV
VIERA Link control
Speaker output Record now
Stop recording
 select
 set or next
Select
Home theater
TV
VIERA Link control
Speaker output Record now
Stop recording
change
Set
Speaker 
control
You can select Home theater or TV speakers for audio output.
Control theater speakers with the TV’s remote control.
This function is available only when Panasonic Amplifier or 
Player theater is connected. ■Home theater:  Adjustment for equipment
  Volume up / down  
 Mute   
  The sound of the TV is muted.
 
  When the equipment is turned off, the TV speakers take over.
    Selecting “Home theater” turns the equipment on 
automatically if it is in standby mode.
 ■TV:  The TV speakers are on.
 Select “Speaker output”  
 Select “Home theater” or “TV”   
Recorder
TV
Record now
Stop recording
VIERA Link control
Speaker output
 select
 change
VIERA Link
control
only with the 
TV’s remote 
control
(for “HDAVI 
Control 2 or 
later”) 
In the VIERA Link menu, you can select HDMI connected equipment and access it quickl\
y. Continue using your 
TV’s remote control to operate the equipment, pointing it at the TV.
 Select “VIERA Link control”  
  Select the equipment you want to access.
(Recorder/Home theater/Player/Camcorder/LUMIX/
Network Camera)
  Using VIERA TOOLS (p. 27)
 If there is more than one equipment item, a number 
after the name indicates the number of items. (e.g. 
Recorder 1/Recorder 2/Recorder 3…)
 The number of equipment items that can be connected is three for recorders, and a total of three for Home 
theater/Player/Camcorder/LUMIX.
Note
 There is a limit to the number of HDMI connectors.
  Operate the equipment with the TV’s remote  control, pointing it at the TV.
 To operate the equipment, read the manual of the equipment.
Recorder
TV
VIERA Link control
Speaker output Record now
Stop recording
 select
 change
You can select available items 
only. 
■ Available TV’s remote control buttons
 Whether an operation is available differs depending on the connected equipment. 
Move the cursor/SelectPlay
Set/AccessStop
Return to previous menuReverse/Forward
SUBMENUDisplay the functions 
menu on the equipmentSkip Reverse/Forward
Available when the purpose of the keys is 
displayed on screenPause
ExitClosed caption
Channel Up/DownSAP (Select Audio Mode)
-0-9Select digital subchannel
Direct TV 
Recording 
(for “HDAVI 
Control 3 or 
later”)
Records the current program on the recorder immediately.
  Select “Record now”  Select “Stop recording”, when you want to stop recording
Recorder
TV
VIERA Link control
Speaker output Record now
Stop recording
 select
 set
Recorder
TV
VIERA Link control
Speaker output Record now
Stop recording
 select
 set
  For optimal recording, the settings of the recorder might 
be required. For details, read the manual of the recorder.   Recording will not stop automatically when the 
program is finished. 
						

							4849
Advanced
 VIERA Link
TM
 “HDAVI Control
TM
”
VIERA Link
TM
 “HDAVI Control
TM
” (Continued)
You can enjoy more convenient operation with the “HDAVI Control” function in the “VIERA Link” 
menu.
For more details on the “HDAVI Control” function, refer to p. 44
VIERATOOLSVIERALink
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
Display VIERA Link menu
Select the item
Recorder
TV
VIERA Link control
Speaker output Record now
Stop recording
 select
 set or next
Select
Home theater
TV
VIERA Link control
Speaker output Record now
Stop recording
change
Set
Speaker 
control
You can select Home theater or TV speakers for audio output.
Control theater speakers with the TV’s remote control.
This function is available only when Panasonic Amplifier or 
Player theater is connected. ■Home theater:  Adjustment for equipment
  Volume up / down  
 Mute   
  The sound of the TV is muted.
 
  When the equipment is turned off, the TV speakers take over.
    Selecting “Home theater” turns the equipment on 
automatically if it is in standby mode.
 ■TV:  The TV speakers are on.
 Select “Speaker output”  
 Select “Home theater” or “TV”   
Recorder
TV
Record now
Stop recording
VIERA Link control
Speaker output
 select
 change
VIERA Link
control
only with the 
TV’s remote 
control
(for “HDAVI 
Control 2 or 
later”) 
In the VIERA Link menu, you can select HDMI connected equipment and access it quickl\
y. Continue using your 
TV’s remote control to operate the equipment, pointing it at the TV.
 Select “VIERA Link control”  
  Select the equipment you want to access.
(Recorder/Home theater/Player/Camcorder/LUMIX/
Network Camera)
  Using VIERA TOOLS (p. 27)
 If there is more than one equipment item, a number 
after the name indicates the number of items. (e.g. 
Recorder 1/Recorder 2/Recorder 3…)
 The number of equipment items that can be connected is three for recorders, and a total of three for Home 
theater/Player/Camcorder/LUMIX.
Note
 There is a limit to the number of HDMI connectors.
  Operate the equipment with the TV’s remote  control, pointing it at the TV.
 To operate the equipment, read the manual of the equipment.
Recorder
TV
VIERA Link control
Speaker output Record now
Stop recording
 select
 change
You can select available items 
only. 
■ Available TV’s remote control buttons
 Whether an operation is available differs depending on the connected equipment. 
Move the cursor/SelectPlay
Set/AccessStop
Return to previous menuReverse/Forward
SUBMENUDisplay the functions 
menu on the equipmentSkip Reverse/Forward
Available when the purpose of the keys is 
displayed on screenPause
ExitClosed caption
Channel Up/DownSAP (Select Audio Mode)
-0-9Select digital subchannel
Direct TV 
Recording 
(for “HDAVI 
Control 3 or 
later”)
Records the current program on the recorder immediately.
  Select “Record now”  Select “Stop recording”, when you want to stop recording
Recorder
TV
VIERA Link control
Speaker output Record now
Stop recording
 select
 set
Recorder
TV
VIERA Link control
Speaker output Record now
Stop recording
 select
 set
  For optimal recording, the settings of the recorder might 
be required. For details, read the manual of the recorder.   Recording will not stop automatically when the 
program is finished. 
						

							5051
Advanced
 Network Setting
Network Setting
This is a setting for connecting to a broadband environment.
■ Press to exit from 
a menu screen
■ Press to return 
to the previous 
screen
Display menu
Select “Setup”
Menu
Picture
Audio
Timer
Lock
VIERA Link
SD card
Closed caption
Setup
 select
 set or next
Select “Network setting”
Setup2/2
Advanced setup
About
Reset to defaults VIERA Link settings
Network setting
VIERA CAST setting
Network Cameras list
ECO/energy saving
select
Select the item and adjust
Network setting 2/2
MAC address12-34-56-78-80-ab
LAN speed settingAutomaticLAN speed---Software update
Network setting 1/2Connection testSucceededIP setting modeAutomaticIP address---.---.---.---Subnet mask---.---.---.---Default gateway---.---.---.---DNS setting modeOKPrimary DNS---.---.---.---Automatic
Secondary DNS---.---.---.---
 select
 adjust
 The network settings become effective when you close the menu and run “Connection test”.
Connection 
test
Check that the network settings are as shown below, and then start “Connection test”.
  Select “Connection test” and press OK.Succeeded: “Connection  test”  succeeded
Only home network:
    Home network is available.
Failed:   Check the broadband environment connection 
and settings and the network settings, and then 
perform the test again.
Test in progress
---:      Test not yet performed
*Press OK again to cancel the test.
(It takes a while to cancel the test.)
Network setting
1/2Connection testSucceededIP setting modeManualIP address192.168.0.5Subnet mask255.255.255.0Default gateway192.168.0.254
 select
 ok
IP setting
•  IP setting 
mode
•   IP address
•   Subnet mask
•   Default 
gateway
  Select “IP setting mode” and set to “Automatic”.■ Manual setting
  Select “IP setting mode” and set to “Manual”
 
 Select the item and press OK
 
  Check the specifications of the broadband router and  enter each IP address.
(When IP automatic acquisition in DHCP can be used)
Network setting 1/2Connection testSucceededIP setting modeAutomaticIP address---.---.---.---Subnet mask---.---.---.---Default gateway---.---.---.---
The acquired address is displayed.
 select
 ok
 
Subnet maskOK10I0  . 0  . 0  . 0
 change 
channel
 ok
or  Each IP address is acquired automatically.
DNS setting
•  
DNS setting 
mode
•   Primary DNS
•   Secondary 
DNS
  Select “DNS setting mode” and set to “Automatic”.
(When DNS automatic acquisition in DHCP can be used)
Network setting 1/2Connection testSucceededIP setting modeAutomaticDefault gateway192.168.0.254DNS setting mode OKPrimary DNS---.---.---.---Automatic
Secondary DNS---.---.---.---
The acquired address is displayed.
 select
 ok
  Each IP address is acquired automatically.
If you are using a broadband router, IP automatic 
acquisition in DHCP can be used under normal 
circumstances. If you are not sure, check with the 
person who installed the equipment, or check the 
instructions for each device.
■ Manual setting
  Select “DNS setting mode” and set to “Manual”
 
 Select the item and press OK
 
  Enter each IP address as was specified by the  provider.
 
Primary DNS10I0  . 0  . 0  . 0
  select
 ok
or
Connection 
speed 
setting
•  
LAN speed 
setting
•   LAN speed
  Select “LAN speed setting” (Default is “Automatic”)  Normally, select “Automatic”.
  If “Connection test” failed, set the “LAN speed setting” 
to “manual” and then select “10BASE half duplex”, 
“10BASE duplex”, “100BASE half duplex” or “100 BASE 
duplex”.
  Cannot be selected when the “LAN speed setting” is 
“Automatic”.
  Changing the settings may make it impossible to 
connect some types of equipment. 
Network setting 2/2
MAC address12-34-56-78-80-ab
LAN speed settingAutomaticLAN speed---Software update
 select
 adjust
Software 
update
  Select “Software update” Press OK to start the software update screen.
  Follow directions of the screen.
 * Set “Clock” first. (p. 24)
Network setting 2/2OK
MAC address12-34-56-78-80-ab
LAN speed settingAutomaticLAN speed---Software update
 select
 ok