Panasonic 3d Interchangeable Lens For Digital Camera H-ft012 Operating Instructions

							Operating Instructions
3D INTERCHANGEABLE LENS FOR DIGITAL CAMERA
Model No.
H-FT012
Before connecting, operating or adjusting this 
product, please read the instructions completely.
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfoFor Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or 
                                    send e-mail to: [email protected]
PP
VQT3B92
until 
2010/10/22
VQT3B92_ENG_SPA.book  1 ページ  ２０１０年１０月１日　金曜日　午後２時５３分 
						

							2VQT3B92ContentsInformation for Your Safety ..................................... 2Precautions ........................................................... 5
Supplied Accessories ............................................. 6
Attaching/Detaching the Lens ................................. 6
Names and Functions of Components ................... 8
Cautions for Use ..................................................... 9
Specifications........................................................ 11
Limited Warranty................................................... 12-If you see this symbol-
THE FOLLOWING APPLIES ONLY IN CANADA.Information for Your SafetyKeep the unit as far away as possible from 
electromagnetic equipment (such as microwave 
ovens, TVs, video games, radio transmitters, 
high-voltage lines etc.).
≥ Do not use the camera near cell phones because 
doing so may result in noise adversely affecting 
the pictures and sound.
≥ If the camera is adversely affected by 
electromagnetic equipment and stops functioning 
properly, turn the camera off and remove the 
battery and/or the connected AC adaptor. Then 
reinsert the battery and/or reconnect the AC 
adaptor and turn the camera on.
Information on Disposal in other Countries 
outside the European Union
This symbol is only valid in the 
European Union.If you wish to discard this 
product, please contact your 
local authorities or dealer and 
ask for the correct method of 
disposal.
This Class B digital apparatus complies with 
Canadian ICES-003.
VQT3B92_ENG_SPA.book  2 ページ  ２０１０年１０月１日　金曜日　午後２時５３分 
						

							3
VQT3B92
≥This lens is compatible with the lens mount 
standard for the Micro Four Thirds
TM System. You 
can take impressive 3D pi ctures just by mounting 
it on a digital camera that supports 3D picture 
recording.
≥ It cannot be mounted on the Four Thirds
TM mount 
specification camera.
≥ A TV compatible with 3D is required to play back 
pictures recorded in 3D.
≥ It does not support recording in vertical 
orientation.
≥ The digital camera illustrations in these operating 
instructions show DMC-GH2 as an example.
 
≥The appearance and specificat ions of products 
described in this manual may differ from the actual 
products you have purchased due to later 
enhancements.
≥ Micro Four Thirds
TM and Micro Four Thirds Logo 
marks are trademarks or registered trademarks of 
Olympus Imaging Corporation, in Japan, the 
United States, the European Union and other 
countries.
≥ Four Thirds
TM and Four Thirds Logo marks are 
trademarks or registered trademarks of Olympus 
Imaging Corporation, in Japan, the United States, 
the European Union and other countries.
≥ G MICRO SYSTEM is a lens exchange type 
digital camera system of LUMIX based on a Micro 
Four Thirds System standard.
≥ Other names, company names, and product 
names printed in these instructions are 
trademarks or registered trademarks of the 
companies concerned.
Refer to catalogues/Web pages for most current 
information regarding compatible digital camera 
bodies.
http://panasonic.jp/support/global/cs/dsc/
 
(This Site is English only.)
ENGLISH
VQT3B92_ENG_SPA.book  3 ページ  ２０１０年１０月１日　金曜日　午後２時５３分 
						

							4VQT3B92THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.●Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
VQT3B92_ENG_SPA.book  4 ページ  ２０１０年１０月１日　金曜日　午後２時５３分 
						

							5
VQT3B92
∫Lens Care≥Sand and dust can damage the lens. Make 
sure that no sand or dust gets inside the lens 
or the terminals when using the lens on a 
beach, etc.
≥This lens is not waterproof. If drops of water get 
onto the lens, wipe the lens with a dry cloth.≥ Do not press the protective glass with excessive 
force.
≥ When there is dirt (water, oil, and fingerprints, etc.) 
on the surface of the protective glass, the picture 
may be affected. Lightly wipe the surface of the 
protective glass with a soft, dry cloth before and 
after taking pictures.
≥ Do not place the lens mount facing downwards. 
Do not allow the lens contact  points 1 to become 
dirty.
∫ About Condensation (Fogging of the 
Lens)≥Condensation occurs when  there are differences 
in temperature and humidity as described below. 
Condensation can cause the lens to become dirty 
and lead to mold and malfunctioning, so exercise 
caution in the following situations:
– When the camera is brought indoors from outside 
during cold weather
– When the camera is brought into an air- conditioned car
– When cold air from an air conditioner is directly  blown onto the lens
– In humid places
≥ Put the camera into a plastic bag to allow it to 
acclimatize to the surrounding temperature in 
order to prevent condensation. If condensation 
occurs, turn the power off and leave it for about 
two hours. Once the camera acclimatizes to the 
surrounding temperature the condensation will go 
away naturally.
PrecautionsVQT3B92_ENG_SPA.book  5 ページ  ２０１０年１０月１日　金曜日　午後２時５３分 
						

							6VQT3B92Supplied Accessories[Inspection to be performed when you unpack 
the unit]
When removing the unit from its packing box, check 
that the main unit and the supplied accessories are 
there and also check their external appearance and 
functions to verify that they have not sustained any 
damage during distribution and transportation.
If you discover any trouble, contact your vendor 
before using the product.
Product numbers correct as of October 2010. These 
may be subject to change.1
Lens Storage Bag
2
Lens Cap
3
Lens Rear Cap(The lens rear cap and lens cap are attached to 
the interchangeable lens at the time of purchase.)
Attaching/Detaching the Lens≥Refer also to the camera’s operating instructions 
for attaching and detaching the lens.∫ Attaching the Lens≥Check that the camera is turned off.1 Turn the lens rear 
cap to detach it.A: Lens Rear Cap2 Align the lens fitting marks
 B (red marks)
 on 
the camera body and the 
lens and then rotate the 
lens in the direction of 
the arrow until it clicks.
• Do not press the lens release 
button  C when you attach a lens.
• Do not try to attach the lens when holding it at an  angle to the camera body as the lens mount may 
get scratched.
• Check that the lens is attached correctly.
VFC4460 VYF3393
VFC4605
3
12

VQT3B92_ENG_SPA.book  6 ページ  ２０１０年１０月１日　金曜日　午後２時５３分 
						

							7
VQT3B92
∫Detaching the Lens≥Check that the camera is turned off.Press the lens release 
button  D while turning 
the lens as far as 
possible in the direction 
of the arrow to detach it.• Attach the lens rear cap so 
that the lens contact point does not get 
scratched.
• Attach the body cap to the camera so no dirt or  dust will get inside the main unit.∫ Attaching and Detaching the Lens Cap≥Be careful not to lose 
the lens cap.VQT3B92_ENG_SPA.book  7 ページ  ２０１０年１０月１日　金曜日　午後２時５３分 
						

							8VQT3B92Names and Functions of Components1Protective glass
2 Lens
3 Contact points
4 Lens fitting mark
 Note
≥ Zoom operation is not supported.
≥ It is recommended to use a tripod or a flash to 
record steady pictures.
≥ When a distance to the subject is 0.6 m (1.97 feet) 
to approximately 1 m (3.28 feet), horizontal 
disparity becomes too great, and you may not see 
the 3D effect at the edges of the image.
≥ Functions that can be used depend on the digital 
camera you are using. Please refer to the 
operating instructions of the digital camera for 
details.
 
4
3
21
To ensure that the 3D pictures can be safely 
viewed, pay attention to the following points 
when recording.
≥ Where possible, record with the digital camera in 
a horizontal state.
≥ Do not get too close to the subject [record from a 
distance of at least 0.6 m (1.97 feet)].
≥ Be careful not to shake the camera while in a 
vehicle or walking.
VQT3B92_ENG_SPA.book  8 ページ  ２０１０年１０月１日　金曜日　午後２時５３分 
						

							9
VQT3B92
Cautions for UseTake care not to drop or knock the lens. Also 
take care not to put a lot of pressure on the lens.
≥Take care not to drop the bag that you inserted the 
lens in as it may damage the lens. The camera 
may stop operating normally and pictures may no 
longer be recorded.
When using pesticides and other volatile 
substances around the camera make sure that 
they do not get onto the lens.
≥If such substances get  onto the lens they can 
damage the exterior case or cause the paint to peel.Do not carry the unit when it is still attached to 
the camera body.
≥ Under no circumstances should the unit be stored 
in any of the following locations since doing so 
may cause problems in operation or 
malfunctioning.
– In direct sunlight or on a beach in summer
– In locations with high temperatures and humidity  levels or where the changes in temperature and 
humidity are acute
– In locations with high concentrations of sand,  dust or dirt
– Where there is fire
– Near heaters, air conditioners or humidifiers – Where water may make the unit wet
– Where there is vibration
– Inside a vehicle
≥ Refer also to the operating instructions of the 
digital camera.
≥ When the unit is not going to be used for a 
prolonged period, we recommend storing with a 
desiccant (silica gel). Failure to do so may result in 
performance failure caused by mold, etc. It is 
recommended that you check the unit’s operation 
prior to use.
≥ Do not leave the lens in  contact with rubber or 
plastic products for extended periods of time.
≥ Do not touch the lens contact point. Doing so can 
cause failure of the unit.
≥ Do not disassemble or alter the unit.
Do not use benzine, thinner, alcohol or other 
similar cleaning agents to clean the lens glass or 
exterior cabinet.
≥ Using solvents can damage the lens or cause the 
paint to peel.
≥ Wipe off any dust or fingerprints with a soft, dry 
cloth.
≥ Do not use a household detergent or a chemically 
treated cloth.VQT3B92_ENG_SPA.book  9 ページ  ２０１０年１０月１日　金曜日　午後２時５３分 
						

							10VQT3B92∫About 3D recordingWith the 3D interchangeable lens attached, do 
not record a subject at less than the minimum 
focus distance.
≥The 3D effects may be more pronounced, and 
therefore cause tiredness or discomfort.
≥ The minimum focus distance is 0.6 m (1.97 feet).When recording with the 3D interchangeable lens 
attached, be careful not to shake the digital camera.≥Tiredness or discomfort may result if the shake is 
pronounced, due to riding in a vehicle or walking etc.≥We recommend using a tripod.∫ About 3D viewingAnyone who is hyper sensitive to light, suffers 
from heart disease or is otherwise unwell should 
avoid viewing 3D pictures.
≥Doing may have an adverse affect on such 
medical conditions.
If you feel tired, uncomfortable or otherwise 
strange when viewing 3D pictures, stop viewing 
at once.
≥ Continuing to view may cause illness.
≥Please rest appropriately after stopping the viewing.When viewing 3D pictures, we recommend 
taking a break every 30 to 60 minutes.
≥Viewing for extended periods may cause eye-fatigue.
Short-sighted or long-sighted persons, those 
with differences in the sight of their right and left 
eyes, and those with astigmatism are advised to 
correct their vision by wearing glasses etc.
Stop viewing if you can clearly see a double 
image while viewing 3D pictures.
≥There are differences in the way that different 
people experience 3D pictures. Please correct your 
sight appropriately before viewing 3D pictures.≥ You can change the 3D setting of your television 
or 3D output setting of the digital camera to 2D.
When viewing 3D pictures on a 3D compatible 
television, position yourself a distance away that 
is least 3 times the effective height of the 
television.
≥ (Recommended distance): 
For 42 z; approx. 1.6 m (5.25 feet), 
for 46 z; approx. 1.7 m (5.58 feet), 
for 50 z; approx. 1.9 m (6.23 feet), 
for 54 z; approx. 2.0 m (6.56 feet).
≥ Viewing from a distance closer than the 
recommended distance may lead to eye-fatigue.
VQT3B92_ENG_SPA.book  10 ページ  ２０１０年１０月１日　金曜日　午後２時５３分