Home
>
Panasonic
>
Camera Lens
>
Panasonic 3d Interchangeable Lens For Digital Camera H-ft012 Operating Instructions
Panasonic 3d Interchangeable Lens For Digital Camera H-ft012 Operating Instructions
Here you can view all the pages of manual Panasonic 3d Interchangeable Lens For Digital Camera H-ft012 Operating Instructions. The Panasonic manuals for Camera Lens are available online for free. You can easily download all the documents as PDF.
Page 1
Operating Instructions 3D INTERCHANGEABLE LENS FOR DIGITAL CAMERA Model No. H-FT012 Before connecting, operating or adjusting this product, please read the instructions completely. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfoFor Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or send e-mail to: [email protected] PP VQT3B92 until 2010/10/22...
Page 2
2VQT3B92ContentsInformation for Your Safety ..................................... 2Precautions ........................................................... 5 Supplied Accessories ............................................. 6 Attaching/Detaching the Lens ................................. 6 Names and Functions of Components ................... 8 Cautions for Use ..................................................... 9 Specifications........................................................ 11 Limited...
Page 3
3 VQT3B92 ≥This lens is compatible with the lens mount standard for the Micro Four Thirds TM System. You can take impressive 3D pi ctures just by mounting it on a digital camera that supports 3D picture recording. ≥ It cannot be mounted on the Four Thirds TM mount specification camera. ≥ A TV compatible with 3D is required to play back pictures recorded in 3D. ≥ It does not support recording in vertical orientation. ≥ The digital camera illustrations in these operating instructions show DMC-GH2...
Page 4
4VQT3B92THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications....
Page 5
5 VQT3B92 ∫Lens Care≥Sand and dust can damage the lens. Make sure that no sand or dust gets inside the lens or the terminals when using the lens on a beach, etc. ≥This lens is not waterproof. If drops of water get onto the lens, wipe the lens with a dry cloth.≥ Do not press the protective glass with excessive force. ≥ When there is dirt (water, oil, and fingerprints, etc.) on the surface of the protective glass, the picture may be affected. Lightly wipe the surface of the protective glass with a...
Page 6
6VQT3B92Supplied Accessories[Inspection to be performed when you unpack the unit] When removing the unit from its packing box, check that the main unit and the supplied accessories are there and also check their external appearance and functions to verify that they have not sustained any damage during distribution and transportation. If you discover any trouble, contact your vendor before using the product. Product numbers correct as of October 2010. These may be subject to change.1 Lens Storage...
Page 7
7 VQT3B92 ∫Detaching the Lens≥Check that the camera is turned off.Press the lens release button D while turning the lens as far as possible in the direction of the arrow to detach it.• Attach the lens rear cap so that the lens contact point does not get scratched. • Attach the body cap to the camera so no dirt or dust will get inside the main unit.∫ Attaching and Detaching the Lens Cap≥Be careful not to lose the lens cap.VQT3B92_ENG_SPA.book 7 ページ 2010年10月1日 金曜日 午後2時53分
Page 8
8VQT3B92Names and Functions of Components1Protective glass 2 Lens 3 Contact points 4 Lens fitting mark Note ≥ Zoom operation is not supported. ≥ It is recommended to use a tripod or a flash to record steady pictures. ≥ When a distance to the subject is 0.6 m (1.97 feet) to approximately 1 m (3.28 feet), horizontal disparity becomes too great, and you may not see the 3D effect at the edges of the image. ≥ Functions that can be used depend on the digital camera you are using. Please refer to the...
Page 9
9 VQT3B92 Cautions for UseTake care not to drop or knock the lens. Also take care not to put a lot of pressure on the lens. ≥Take care not to drop the bag that you inserted the lens in as it may damage the lens. The camera may stop operating normally and pictures may no longer be recorded. When using pesticides and other volatile substances around the camera make sure that they do not get onto the lens. ≥If such substances get onto the lens they can damage the exterior case or cause the paint to...
Page 10
10VQT3B92∫About 3D recordingWith the 3D interchangeable lens attached, do not record a subject at less than the minimum focus distance. ≥The 3D effects may be more pronounced, and therefore cause tiredness or discomfort. ≥ The minimum focus distance is 0.6 m (1.97 feet).When recording with the 3D interchangeable lens attached, be careful not to shake the digital camera.≥Tiredness or discomfort may result if the shake is pronounced, due to riding in a vehicle or walking etc.≥We recommend using a...