Optoma Projector Tw865 Nlw User Manual

English2

User Controls

Control Panel & Remote Control
Control Panel
Using the Control Panel
OffTurn off the projector.
Power OnTurn on the projector.
ShutterOpen/close the built-in shutter.
SourcePress “SOURCE” to select an input 
signal.
ZoomAdjust lens zoom function.
FocusAdjust lens focus function.
ShiftAdjust Lens shift up/down/left/right.
VGA Press “VGA ” to choose source 
from VGA-IN connector.
VGA 2Press “VGA 2” to choose source 
from VGA2-IN connector.
MenuPress “Menu” to...

English22

User Controls

Using the Control Panel
Re-SyncAutomatically synchronize the pro-
jector to the input source.
DVI-DPress “DVI-D” to choose source 
from DVI-D connector.
HDMIPress “HDMI” to choose source 
from HDMI connector.
Four Directional Select 
Keys
Use to ▲▼◄► select items or 
make adjustments to your selection.
EnterConfirm your item selection.
YPbPrPress “YPbPr” to choose compo-
nent video source.
BNCPress “BNC” to choose source from 
BNC (YPbPr/RGBHV) connector.
AV MuteMomentarily...

English23

User Controls

Using the Remote Control
Power OnTurn on the projector.
StandbyTurn off the projector.
Function Adjust Function  settings.
Function 2Adjust Function 2 settings.
Lens FocusAdjust lens focus function.
Lens ZoomAdjust lens zoom function.
Lens ShiftAdjust Lens shift up/down/left/right.
LED IndicatorIndicate Lens function status. LED 
indicator light that is in use.
SourcePress “SOURCE” to select an input 
signal.
Volume +/-Adjust to increase / decrease the 
volume....

English24

User Controls

Using the Remote Control
AllRestore the default remote code.
VideoPress “Video” to choose composite 
video source.
IDSet the remote code.
BNCPress “BNC” to choose source from 
BNC (YPbPr/RGBHV) connector.
VGA 2Press “VGA 2” to choose source 
from VGA2-IN connector.
VGA Press “VGA ” to choose source 
from VGA-IN connector.
S-VideoPress “S-Video” to choose source 
from S-Video connector.
FormatSelect the desired aspect ratio.
MenuPress “Menu” to launch the on-...

English25

User Controls

Remote Code Setting
Default code setting (common code): 00
The default code of remote control can be set by pressing "All" key 
continuously until LED indicator quickly blinking 3 times. (around 3 
seconds) Regardless of projector’s remote code, the remote control 
can operate each projector simultaneously if the remote code of 
remote control is set at default code.
Remote code setting: 01 ~ 99
The remote code of the remote control can be changed by pressing 
the “ID”...

English26

User Controls

Cable Connection for Wired Control
As remote control connects with projector by cable
IR emitter signal will be cut off.
No extra setting need.


Projector (II)
Projector (I)
Audio Cable Jack/Jack *
Remote Control Adapter (3.5mm to 2.5mm Mini Jack) *
.
2.
1
1
2
NOTE
(*) Optional ac-cessoryUse cable length of 20m or less, if the length of cable exceeds 20m, the remote control may not work normally.

 

English27

User Controls

The Projector has multilingual On-screen Display menus that 
allow you to make image adjustments and change a variety of 
settings. The projector will automatically detect the source.
How to operate
.  To open the OSD menu, press “Menu” on the Remote Control or 
Control Panel.
2  When OSD is displayed, use ▲▼ keys to select any item in the 
main menu. While making a selection on a particular page, press 
► or “Enter” key to enter sub menu.
3.  Use ▲▼ keys to select the...

English28

User Controls

Menu Tree
Main MenuSub MenuSettingsNOTE
Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using.(*) Optional func-tion


Display Mode
BrightnessContrastSharpnessColorTintAdvancedNoise ReductionBrilliantColor™GammaDynamicBlackTrueVividColor Temp.Color SpaceColor Space (HDMI)Color Settings
Input Source
ExitFormat (XGA)Format(WXGA)ZoomEdge MaskH Image ShiftV Image Shift* Geometry OffKeystone4-Corner/...

English29

User Controls

Main MenuSub MenuSettingsSignal (RGB)Frequency 0~100PhaseH. PositionV. PositionAutomaticExitSignal (Video)White LevelBlack LevelSaturationIREExitProjector IDAudio SettingsInternal SpeakerMuteVolumeAudio InputExitAdvancedLogoLogo CaptureClosed CaptioningExitNetwork Network StateDHCPIP AddressSubnet maskGatewayDNSApplyExit* Image Blending BlendingCropOverlapBright Adj.Gamma 1.8 / 2 / 2.2ExitSource Lock Off / OnHigh AltitudeInformation HideKeypad LockTest PatternBackground...

English30
User Controls
IMAGE
  Display Mode
There are many factory presets optimized for various types of 
images.
Presentation: Good color and brightness from PC input.
Bright: Maximum brightness from PC input.
Movie: For home theater.
sRGB: Standardised accurate color.
Blackboard: This mode should be selected to achieve optimum 
color settings when projecting onto a blackboard (green).
Classroom: This mode is recommended for projecting in a 
classroom.
DICOM SIM.: This display mode simulates the...