Optoma Projector Tw865 Nlw User Manual

English5

User Controls

When making a direct connection from your computer to the projector
Step 3:  To open Network Connections, click 
Start, click Control Panel, click 
Network and Internet Connec-
tions, and then click Network Con-
nections. Click the connection you 
want to confi gure, and then, under 
Network Tasks , click Change 
settings of this connection.
Step 4:  On the General tab, under This 
connection uses the following 
items, click Internet Protocol 
(TCP/IP), and then click...

English52

User Controls

Crestron RoomView Control Tool
Crestron RoomView™ provides a central monitoring station for 250+ 
control systems on a single Ethernet network (more are possible, 
the number depends on the combination of IP ID and IP address). 
Crestron RoomView monitors each projector, including projector’s 
online status, system power, lamp life, network setting and hardware 
faults, plus any custom attribute as defi ned by the Administrator.
The Administrator can add, delete, or edit room...

English53

User Controls

Edit Attribute 
Edit Event 
For more information, please visit
http://www.crestron.com & www.crestron.com/getroomview.
3.
4. 

English54

User Controls

 Blending
Choose the “On” to turn blending on.
Choose the “Off” to turn blending off.
 Crop
Choose the “On” to turn crop on.
Choose the “Off” to turn crop off.
 Overlap
This allows you to set the overlap edge of blending area.
 Bright Adj.
This allows you to adjust the brightness of the blending area.
 Gamma
This allows you to select the gamma mode.




SETUP |  
Image Blending *
NOTE
(*) Optional func-tion 

English55

User Controls

OPTIONS
NOTE
Press direct source key on remote control-ler, it will change source directly and automatical-ly set the Source Lock to “ON”.To turn off the keypad lock, press and hold “Enter” key on top of the projec-tor for 5 seconds.


 Source Lock
On: The projector will only search current input connection.
Off: The projector will search for other signals if the current 
input signal is lost.
 High Altitude
When “On” is selected, the fans will spin faster. This feature is...

English56

User Controls

 Information
Display the projector information for source, resolution, and soft-
ware version on the screen.
 Reset
Choose “Yes” to return the display parameters on all menus to the 
factory default settings.
OPTIONS 
(Continued)
NOTE
Remote code: show the remote code of the projector.Remote code(Active): show the remote code of the remote control.

 

English57

User Controls

 Lamp Hours
Display the projection time.
 Lamp Reminder
Choose this function to show or to hide the warning message 
when the changing lamp message is displayed.
The message will appear 30 hours before suggested replacement 
of lamp.
 Brightness Mode
Bright: Choose “Bright” to increase the brightness.
Eco: Choose “Eco” to dim the projector lamp which will lower 
power consumption and extend the lamp life.
Image AI: Image AI improves the contrast of the picture by 
optimizing...

English58

User Controls

OPTIONS |  
Remote Settings
 Function 
Choose your desired function from “Brightness” , “PIP” or “\
Projec-
tion”.
 Function 2
Choose your desired function from “Contrast” , “PIP Source”, “PIP 
Swap” or “Color”.
 Top IR Sensor
When this function is “On”, the projector can be operated by the 
remote control from top IR receiver.
By selecting “Off”, you will be able to use the control panel keys or 
operate by the remote control from front IR receiver.
 Front IR Sensor
When...

English59

User Controls

OPTIONS |  
Advanced
 Direct Power On
Choose “On” to activate Direct Power mode. The projector will au-
tomatically power on when AC power is supplied, without pressing 
the “” key on the projector control panel or on the remote control.
 Signal Power On
The projector will power on when it receives a signal. This elimi-
nates the need to use the “Power” button on the remote control or \
the projector keypad.
 Auto Power Off (min)
Sets the countdown timer interval. The...

English60

User Controls

Network Application System 
Introduction *
Network application system include Optoma Presenter Sys-
tem, Web Control System and Multi-media Card Reader. 
Application which can bring the high performance in network 
projection. Base on network protocol, user can configure the 
projector remotely. It supports to connect the PC with Projector 
by USB, Ethernet, and Wireless. This project makes full use of 
the network capability. It allows the administrator to control all 
the...