Optoma Hd67n Projector User Manual

							English
21
User Controls
Menu Tree
Main Menu Sub Menu
ModeCinema / Bright / Photo / Reference / User 
Contrast 0~100
Brightness 0~100
#1Color0~100#1Tint0~100
Sharpness 0-31
Advanced BrilliantColor™ 
0-10
Degamma Film / Video / Graphics / Standard
Image AI On / Off
Color Temp. Warm / Medium / Cold
RGB Gain/Bias Red Gain / Green Gain / Blue Gain / Red 
Bias / Green Bias / Blue Bias / Reset / Exi
tColor Space AUTO / RGB / YCbCr
Input Source HDMI / VGA / Video / S-Video
Exit
Format 4:3 / 16:9 / LBX / Native / AUTO
Overscan 0~5
EdgeMask 0~10
V Image Shift -50 ~ +50
V Keystone -40 ~ +40
SuperWide Off / On / Auto
3D 3D Mode
Off / DLP-Link / IR
#23D Sync. Invert On / Off
Exit
Language English / Deutsch / Français / Italiano / 
Español / Português / Svenska / 
Nederlands / Norsk/Dansk / Polski / 
Jmk
kdbc / Suomi / 
0 / Magyar /  ýeš
tina /  ò‘®Ë / 
ïm® / Nžÿm® / ²! / 
‚VQ / Türkçe / Farsi
Projection Front / Front-Ceiling / Rear / Rear-Ceiling 
(ICONS)Menu LocationTop-Left / Top-Right / Center / Bottom-Left / Bottom-Right(ICONS)#3SignalAutomatic Enable / Disable
Phase (VGA) 0~31
Frequency (VGA) -5~5
H. Position (VGA) -5~5
V. Position (VGA) -5~5
Saturation (Video) 0~100
Hue (Video) 0~100
IRE (Video) 0 / 7.5
Exit
Projector ID 0~99
Mute On / Of
fVolume0~10
SETUP IMAGE
DISPLAY
Settings 
						

							2222
User Controls
Main Menu Sub MenuSettings
Source Lock
On / OffHigh Altitude
On / OffInformation HideOn / OffBackground ColorBlack / Red / Blue / Green / White
Test Pattern None / Grid / White Pattern
Advanced Auto Power Off (min.) 0-180
Sleep Timer (min.) 0-995
Exit
Lamp Settings Lamp Hours
Lamp Reminder
On / Off
Brightness Mode STD/Bright
Lamp Reset Yes/No
Exit
Reset
OPTIONS
	Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using.
	(#1)   “Color” and “Tint” are only supported in Video mode. 
	(#2)  “3D Sync Invert” is only available when 3D is enabled and this mode 3D is for DLP link glass only.
	(#3) “Signal” is only supported in Analog VGA (RGB) signal.
NoteNote 
						

							English
23
User Controls
IMAGE
  Display Mode
There are many factory presets optimized for various types of 
images.
 Cinema: For home theater.
 Bright: Maximum brightness input.
 Photo: Optimized for displaying photographic images.
 Reference: This mode is intended to reproduce, as close as 
possible, the image the way the movie director intended. Color, 
color temperature, brightness, contrast and gamma settings are 
all confi gured to standard reference levels.
 User: User’s settings.
  3D: The initial default setting of this mode is DLP-Link. 
Any further adjustments by the user in 3D will be saved in this 
mode for further use.
  Contrast
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
 
 Press the  to decrease the contrast.
 
  Press the  to increase the contrast.
  Brightness
Adjust the brightness of the image.
 
  Press the  to darken image.
 
  Press the  to lighten the image. 
						

							2424
User Controls
	“Color” and “Tint” 
functions are only 
supported under 
Video mode.
NoteNote
  Color
Adjust a video image from black and white to fully saturated color .
 
 Press the  to decrease the color saturation in the image.
 
 Press the  to increase the color saturation in the image. 
  Tint
Adjust the color balance of red and green.
 
 Press the  to increase the amount of green in the image.
 
 Press the  to increase the amount of red in the image. 
  Sharpness
Adjust the sharpness of the image.
 
 Press the  to decrease the sharpness.
 
 Press the  to increase the sharpness.  
						

							English
25
User Controls
IMAGE | Advanced
 BrilliantColor™
This adjustable item utilizes a new color-processing algorithm and 
system level enhancements to enable higher brightness while provid-
ing true, more vibrant colors in picture. The range is from “0” to “10”. 
If you prefer a stronger enhanced image, adjust toward the maximum 
setting. For a smoother, more natural image, adjust toward the mini-
mum setting.
 Degamma
This allows you to choose a degamma table that has been  
fine-tuned to bring out the best image quality for the input.
  Film: for home theater.
  Video: for video or TV source.
  Graphics: for image source.
  PC: for PC or computer source.
  Image AI
Image AI improves the contrast of the picture by optimizing the 
brightness of the lamp according to the picture content.
 On: The dynamic image performance manager is active in 
making sure your greatest pleasure from seeing a movie 
dynamically with the most dark details revealed, vivid and 
bright image performed all the way.
 Off: The dynamic image performance manager is on standby. 
						

							2626
User Controls
 Color Temp
If set to cold temperature, the image looks more blue. (cold image) 
If set to warm temperature, the image looks more red.  
(warm image)
 RGB Gain/Bias
Press    into the next menu as below and then use  or  to 
select item. 
   Red Gain / Green Gain / Blue Gain / Red Bias / Green Bias 
/ Blue Bias: Use  or  to select Red, Green, or Blue for 
brightness (Gain) and contrast (Bias).
   Reset: Choose “Yes” to return the factory default settings for 
color adjustments. 
						

							English
27
User Controls
 Color Space
Select an appropriate color matrix type from AUTO, RGB or YUV.
 Input Source
Use this option to enable / disable input sources. Press  to enter 
the sub menu and select which sources you require. Press “Enter” 
to finalize the selection. The projector will not search for inputs that 
are not selected. 
						

							2828
User Controls
DISPLAY
 Format
Use this function to choose your desired aspect ratio.
  4:3: This format is for 4×3 input sources.
  16:9: This format is for 16×9 input sources, like HDTV and DVD 
enhanced for Wide screen TV.
  LBX: This format is for non-16x9, letterbox source and for users 
who use external 16x9 lens to display 2.35:1 aspect ratio using 
full resolution. 
  Native: This format displays the original image without any 
scaling.
  AUTO: Automatically selects the appropriate display format.
Aspect ratio
(source detected) Resize image
4:3960 x 720 center
16:91280 x 720 center
LBX1280 x 720 center
 
Detail informations about LBX mode :
1.   Some Letter-Box DVDs are not enhanced for 16x9 TVs. In 
this situation, the image will not look right when displayed in 
16:9 mode. 
In this situation, please try to using the 4:3 mode to view the 
DVD.
If the content is not 4:3, there will be black bars around the  
						

							English
29
User Controls
image in 16:9 display. For this type of content, you can use 
LBX mode to fi ll the image on the 16:9 display. 
2.  If you use an external anamorphic lens, this LBX mode also  allows you to watch a 2.35:1 content (include Anamorphic 
DVD and HDTV fi lm source) that support anamorphic wide is 
enhanced for 16x9 Display in a wide 2.35:1 image. 
In this case, there are no black bars. Lamp power and 
vertical resolution are fully utilized.
  Overscan
Overscan function removes the noise in a video image. Overscan 
the image to remove video encoding noise on the edge of video 
source. 
  Edge Mask
  Press the  to reduce the size of an image.
 
 Press the  to magnify an image on the projection screen.
  V Image Shift
Shift the projected image position vertically. 
  V Keystone
Press the  or  to adjust image distortion vertically and makes a 
rectangular image.
  SuperWide
SuperWide is a feature that uses a special 2.0:1 aspect ratio 
screen enabling both 16:9 and 2.35:1 aspect ratio movies to be 
shown without black bars at the top and bottom of the screen
 Off: Your desired aspect ratio can be selected - 4:3, 16:9, LBX 
and Native.
  On: Only formats 4:3 and 16:9 can be selected.
 Auto: To solve the differences of the fi lm formats, the option can 
keep the format in the same ratio.
	
Each I/O has 
different setting of 
“Overscan”.
 	 “Overscan” and 
“Edge Mask” can’t 
work at same time. 
NoteNote
	“SuperWide“ is “Off“ 
as default.
NoteNote 
						

							3030
User Controls
How to use “SuperWide”
1. Obtain a 2.0:1 aspect ratio screen
2.  Switch SuperWide ON
3.  Align the projector image correctly on the screen
4.   Enjoy movies without black bars