Optoma Hd67n Projector User Manual

English
1
OPTIONS  ..........................................36
OPTIONS | Advanced  ........................37
OPTIONS | Lamp Settings .................38
Appendices  ....................................39
Troubleshooting  ................................39
Image Problems .................................39
Other Problems  ..................................40
Projector Status Indication  .................41
Remote Control Problems  .................42
Replacing the lamp ...........................43...

22
Usage Notice
Safety Information
The lightning fl ash with arrow head within an equilateral triangle is 
intended to alert the user to the presence of uninsulated “dangerous \
voltage” within the product’s enclosure that may be of suffi cient 
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert 
the user to the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the...

English
3
Usage Notice
	When the lamp 
reaches the end 
of its life, the 
projector will not 
turn back on until 
the lamp module 
has been replaced. 
To replace the 
lamp, follow the 
procedures listed 
under “Replacing 
the Lamp” section 
on pages 43-44.
  Precautions
 
Please follow all warnings, precautions and 
maintenance as recommended in this user’s 
guide.
▀■ Warning-  Do not look into the projector’s lens when the lamp is 
on. The bright light may hurt your eyes.
▀■ Warning- To reduce the risk...

44
Usage Notice
Do:
		Turn off and unplug the power plug from the AC outlet before 
cleaning the product.
		Use a soft dry cloth with mild detergent to clean the display 
housing.
		Disconnect the power plug from AC outlet if the product is 
not being used for a long period of time.
Do not:
		Block the slots and openings on the unit provided for 
ventilation.
		Use abrasive cleaners, waxes or solvents to clean the unit.
		Use under the following conditions:
  - In extremely hot, cold or humid...

English
5
Usage Notice
Eye Safety Warnings
 
▀■ Avoid staring/facing directly into the projector beam at all 
times. Keep your back to the beam as much as possible.
▀■ When projector is used in a classroom, adequately supervise 
students when they are asked to point out something on the 
screen.
▀■ In order to minimize the lamp power, use room blinds to re-
duce ambient light levels. 
Product Features
▀■ WXGA (1280 x 720) Native resolution
▀■ One built-in speaker with 2 watt amplifier
▀■ HDTV compatible...

66
 
Introduction
Power Cord 1.8m
IR Remote Control
 
Package overview
Unpack and inspect the box contents to ensure 
all parts listed below are in the box. If something 
is missing, please contact your nearest customer 
service center.
Documentation : 
	User’s Manual
	Warranty Card
	Quick Start Card
	WEEE Card 
  (for EMEA only)
	
Due to different 
applications in 
each country, 
some regions 
may have 
different 
accessories. 2 × AAA Batteries
Projector with lens cap 
VGA to Component 
Cable...

English
7
 
Introduction
1.  Control Panel
2.  Zoom Ring
3.  Focus Ring
4.  Zoom Lens
5.  IR Receiver
Main Unit
  Product overview
6.  Tilt-Adjustment Feet
7.  Security Bar
8.  Input / Output Connections
9.  Power Socket
2
46
6
3
1
7
9
8
6
5 

88
 
Introduction
 
Control Panel
1.  Power/Standby
2.  Menu 
3.  Source
4.  Enter
5.  Re-Sync
6.  Temp LED
7.  Lamp Fail LED 
8.  Power LED 
9.  Four Directional Select Keys
10. Keystone Correction
2
1
6
7
8
5
10
3
4
9 

English
9
 
Introduction
 
Input / output Connections
1.  VGA-In/SCART/YPbPr Connector (PC Analog Signal/Component Video Input/HDTV/SCART/
YPbPr) 
2.  HDMI Connector
3.  S-Video Input Connector
4.  Composite Video Input Connector
5.  RS-232 Connector (3-pin)
6.  Audio Input Connector (3.5mm Mini Jack)
7.  Audio Output Connector (3.5mm Mini Jack)
8.  Power Socket 
9.  Security Bar
10. Kensington
TM Lock Port
EnglishEnglish
VGA-IN / SCART / YPbPrHDMIS-VIDEOVIDEORS-232AUDIO-INAUDIO-OUT
4732
8910
516 

1010
 
Introduction
Remote Control
1.  Power On
2.  Power Off
3.  16:9
4.  Native
5.  Contrast
6.  Overscan
7.  Enter
8.   Re-Sync
9.  VGA Source
10. Video Source
11.  3D Invert
12. S-Video Source
13. HDMI Source
14. Menu
15. Source
16.  Source Lock
17. EdgeMask
18. Brightness
19. LBX
20. 4:3
21. Lamp Mode
22. Mode
23. Four Directional Select Keys  
Lamp
3D InvertVGA
1
2
3
4
5
6
9
10
13
17
18
19
22
20
21
7
8
23
15
14
16
12
11