Optoma Hd67n Projector User Manual

							English
11
Installation
Connecting the Projector
	Due to the difference in applications for each country, some regions may have different accessories.
	(*) Optional accessory 
Connect to Computer/Notebook
1....................................................................................................Power Cord2...................................................................................................*VGA Cable3...........................................................................................*DVI/HDMI Cable4................................................................................................*RS232 Cable 5.........................................................................................*Audio Input Cable6......................................................................................*Audio Output Cable 
VGA-IN / SCART / YPbPrHDMIS-VIDEOVIDEORS-232AUDIO-INAUDIO-OUT
E62405SPR
1
42
5
6
3
NoteNote 
						

							1212
Installation
VGA-IN / SCART / YPbPrHDMIS-VIDEOVIDEORS-232AUDIO-INAUDIO-OUT
E62405SPR
Connect to Video Sources
1....................................................................................................Power Cord2.............................................................................*VGA to component Cable3.............................................................................*3 RCA Component Cable4...................................................................................................*VGA Cable 5...................................................................................*SCART/VGA Adaptor6..................................................................................................*HDMI Cable7.................................................................................*Audio Cable Jack/RCA8..............................................................................................*S-Video Cable9................................................................................*Composite Video Cable
	Due to the difference in applications for each country, some regions may have different accessories.
	(*) Optional accessory 
DVD Player, Set-top Box, HDTV receiver
S-Video Output
198
647
5
Composite Video Output
2
3
NoteNote 
						

							English
13
Installation
Powering on the Projector
1.  Remove the lens cap. 
2. Securely connect the power cord and signal cable. When 
connected, the Power LED will turn red.  
3.  Turn on the lamp by pressing “POWER” button either on the  top of the projector or on the remote. The Power LED will 
now turn Green. 
  The startup screen will display in approximately 10 seconds.  The fi rst time you use the projector, you can select your 
preferred language after the startup screen displays.
4.  Turn on and connect the source that you want to display  on the screen (computer, notebook, video player, etc). The 
projector will detect the source automatically. If not, push 
menu button and go to “OPTIONS”. 
Make sure that the “Source Lock” has been set to “Off”.
	 If you connect multiple sources at the same time, press the 
“SOURCE” button on the control panel or direct source keys 
on the remote control to switch between inputs.
  Powering the projector on/off 
	 Turn on the 
projector fi rst and 
then select the 
signal sources.
Lens Cap1
Power/Standby 2
NoteNote 
						

							1414
Installation
Powering off the Projector
1.  Press the “POWER” button to turn off the projector lamp. 
The following message will be displayed on the screen. 
  Press the “POWER” button again to confirm, otherwise the 
message will disappear after 15 seconds. 
When you press the “POWER” button a second time, the 
system will show the countdown timer on the screen.
2. The cooling fans continue to operate for about 10 seconds 
for cooling cycle. When the Power LED turns Red, the 
projector has entered standby mode.
 If you wish to turn the projector back on, you must wait until 
the projector has completed the cooling cycle and has en-
tered standby mode. Once in standby mode, simply press 
“POWER” button to restart the projector.
3. Disconnect the power cord from the electrical outlet and the 
projector.
4. Do not turn on the projector immediately following a power 
off procedure.
Warning Indicator
 When the “LAMP” indicator lights red (“POWER” indicator  
flashes red), the projector will automatically shut down. 
Please call your nearest service center for assistance.
 When the “TEMP” indicator lights red (“POWER” indicator 
flashes red), it indicates the projector has overheated. The 
projector will shut down automatically.
  Under normal conditions, the projector can be switched on 
again after it has cooled down. 
 When the “TEMP” indicator flashes red (“POWER” indicator 
flashes red), it indicates the fan has failed.
	Contact the nearest service center if the projector displays these symptoms. See pages 52-53 for more information.
NoteNote 
						

							English
15
Installation
 
Adjusting the Projected Image
Adjusting the Projector’s Height 
The projector is equipped with elevator feet for 
adjusting the image height.
1. Locate the adjustable foot you wish to modify on the underside of the projector. 
2. Rotate the adjustable ring counter clockwise to raise  the projector or clockwise to lower it. Repeat with the 
remaining feet as needed.
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Adjusting the Projector’s Zoom / Focus
Focus RingZoom Ring
You may turn the zoom ring to zoom in or out. To focus 
the image, rotate the focus ring until the image is clear. 
The projector will focus at distances from 3.28 to 34.44 feet 
(1.0 to 10.5 meters). 
						

							1616
Installation
Adjusting Projection Image Size
Width
Height
Diagonal
Top View
Side View Projection Distance (D)
Projection Distance (D) Screen
Screen
Screen (W)
Screen (H)
Offset (Hd)
 This graph is for user’s reference only.
Diagonal length (inch) size of 16:9 Screen
Screen Size W x HProjection Distance (D)Offset (Hd)(m)(feet)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
26.57 0.59 0.33 1.94 1.08 -1.0-3.28 0.04 0.13 
30.00 0.66 0.37 2.16 1.21 1.01.13.28 3.61 0.05 0.15 
40.00 0.89 0.50 2.92 1.64 1.41.54.59 4.92 0.06 0.20 
60.00 1.33 0.75 4.36 2.46 2.12.36.89 7.54 0.09 0.31 
70.00 1.55 0.87 5.08 2.85 2.42.67.87 8.53 0.11 0.35 
80.00 1.77 1.00 5.81 3.28 2.73.08.86 9.84 0.12 0.41 
90.00 1.99 1.12 6.53 3.67 3.13.410.17 11.15 0.14 0.46 
100.00 2.21 1.25 7.25 4.10 3.43.811.15 12.46 0.16 0.51 
120.00 2.66 1.49 8.72 4.89 4.14.513.45 14.76 0.18 0.61 
150.00 3.32 1.87 10.89 6.13 5.15.616.73 18.37 0.23 0.76 
180.00 3.98 2.24 13.05 7.35 6.26.820.34 22.30 0.28 0.91 
250.00 5.53 3.11 18.14 10.20 8.69.428.21 30.83 0.39 1.26 
300.00 6.64 3.74 21.78 12.27 10.311.333.78 37.06 0.46 1.52 
306.00 6.77 3.81 22.21 12.50 10.5-34.44 -0.47 1.55  
						

							English
17
User Controls
Control Panel
 
Control Panel & Remote Control
There are two ways for you to control the functions: 
Control Panel and Remote Control.
Using the Control Panel
POWERRefer to the “Power On/Off the Projector” section on 
pages 13-14.
MENUPress “MENU” to launch the on-screen display 
(OSD) menu. To exit OSD, Press “MENU” again.
Confi rm your item selection.
RE-SYNCAutomatically synchronize the projector to the input 
source.
SOURCEPress “SOURCE” to select an input signal.
Four Directional 
Select KeysUse     to select items or make adjustments 
to your selection.
Keystone Use   to adjust image distortion caused 
by tilting the projector. (
±40 degrees)
Lamp LED Indicates the projector’s lamp status.
Temp LEDIndicates the projector’s temperature status. 
Power LEDIndicates the projector’s status. 
						

							1818
User Controls
Remote Control
Lamp
3D InvertVGA
Using the Remote Control
Power OnRefer to the “Power On” section on page 13.
Power OffRefer to the “Power On/Off the Projector” 
section on page 14.
Lamp ModeIncrease the brightness of the image. (refer 
to page 40)
ModeSelect the display mode from Cinema, 
Bright, Photo, Reference and User.
4:3Scale the image at a 4:3 aspect ratio.
16:9Scale the image at a 16:9 aspect ratio.
LBX
Enable the viewing of the letterboxed nonan-
amorphically enhanced movie at full screen 
width. Part of the original image will be lost if 
the image aspect ratio is less than 2.35:1.
NativeThe input source will be displayed without 
scaling.
BrightnessAdjust the brightness of the image.
ContrastControl the degree of difference between the 
lightest and darkest parts of the picture.
EdgeMask
Mask off a few pixels on each edge of the 
image to be displayed. Use this function 
to adjust if image source happens to have 
noise near any edge of the display image.
Source 
LockSelect auto detection all connector ports or 
lock current connector port.
Overscan
Mask off a few pixels on each edge of the 
image to be displayed. Use the function 
to adjust if image source happens to have 
noise near any edge of the display image. 
						

							English
19
User Controls
Lamp
3D InvertVGA
Using the Remote Control
EnterConfi rm your item selection.
SourcePress “Source” to select an input 
signal.
Re-syncAutomatically synchronizes the pro-
jector to the input source.
MenuDisplay or exit the on-screen display 
menus for projector.
HDMIPress “HDMI” to choose source from 
HDMI connector.
VGAPress “VGA” to choose source from 
VGA/SCART/YPbPr connector.
S-VideoPress “S-Video” to choose S-Video 
source.
VideoPress “Video” to choose Composite 
video source.
3D InvertPress the “3D Invert” to turn the 3D Sync. 
Invert OSD menu on/off.
Four 
Directional 
Select KeysUse     to select items or 
make adjustments to your selection. 
						

							2020
User Controls
The Projector has multilingual On-screen Display menus that 
allow you to make image adjustments and change a variety of 
settings. The projector will automatically detect the source. 
How to operate 
1.  To open the OSD menu, press “MENU” on the Remote Control or Projector Keypad.
2  When OSD is displayed, use    keys to select any item in the 
main menu. While making a selection on a particular page, press  
 or “Enter” key to enter sub menu.
3. Use   keys to select the desired item and adjust the settings 
by 
  key.
4.  Select the next item to be adjusted in the sub menu and adjust as  described above.
5. Press “Enter” to confi rm, and the screen will return to the main 
menu.
6.  To exit, press “MENU” again. The OSD menu will close and the projector will automatically save the new settings.
  on-screen Display Menus
Main Menu
Sub Menu Settings