Optoma Hd33 B Projector User Manual

English11
Installation
Due to the  ™difference in ap-plications for each country, some regions may have different acces-sories.* Optional Acces- ™sory
Power Cord1. 
DVI/HDMI Cable *2. 
VGA Cable *3. 
USB Cable *4. 
Emitter Cable * 5. 
12V DC Plug *6. 
RS232 Cable *7. 
Connect to Computer/Notebook
NOTE
Connecting the Projector
HDMI 1HDMI 2VGAYPbPrYGPb BPrR
VIDEO SERVICE RS-232
12V Trigger
3D SYNCOut (5V)
POWER
m o l e
x
MOLEX
E62405SP
R
1
425
7
3
6
+12V Output
3D Glasses        

English12
Installation
Power Cord1. 
HDMI Cable *2. 
RCA Component Cable for YPbPr *3. 
VGA to RCA Component Cable for YPbPr *4. 
Emitter Cable * 5. 
12V DC Plug*6. 
Composite Video Cable *7. 
Connect to Video
Due to the  ™difference in ap-plications for each country, some regions may have different acces-sories.12V Trigger is  ™programmable trigger.For more detailed  ™information about connecting to the 3D emitter and 3D glasses, please refer to their user’s guides.Use high speed...

English13
Installation
Connect to 3D Video Devices
The 3D video  ™source device must be powered on before the 3D projector.
If input video is  ™normal 2D, please press “3D Format” and switch to “Off”.If “SBS Mode” is  ™active, 2D video content will not display correctly.
NOTE
NOTEOnce you have connected your devices together with HDMI 
cables, as shown in the diagram, you are ready to begin. 
Power ON your 3D video source and your 3D projector.
PlayStation® 3 GamesMake sure that you have...

English14
Installation
All other product names, company names and trade names used herein are for identifications purposes only and may be trademarks or registered trademarks of their respective \
owners. All images have been 
simulated.
3D Broadcast3D Blu-ray™ Disc
3D Console Games
SKY+HD, cable/satellite  box 3D Blu-ray™ Player
PlayStation
® 3
3D Glasses Full 3D 1080p DLP
® Projector  

English15
Installation
To turn ON 3D glasses: Press the “Power” button and the LED will flash 1. one time indicating the glasses are ready to use 3D mode.Verify that 3D content is being sent to the projector and signal is compa\
t-2. ible with projector specifications.Turn on the “3D Mode” (DLP-Link/VESA 3D - depending on which type 3. of glasses you are using) of the 3D projector. The option is located in the “Display” section of the projector OSD menu.Turn on 3D glasses and verify image appears in 3D...

English16
Installation
Powering On the Projector
1. Remove the lens cap. 
2. Securely connect the power cord and signal cable. When con-
nected, the Power LED will turn red.
3. Turn on the lamp by pressing “POWER” button on the back of the 
projector or pressing “” button on the remote control. The Power 
LED will flash blue. 
The startup screen will display in approximately 30 seconds. The 
first time you use the projector, you can select your preferred lan-
guage from quick menu after the startup...

English17
Installation
Powering Off the Projector
1. Press the “” button on the remote control or “POWER” button 
on the back of the projector two times with one second interval to 
turn off the projector. First time, it will display the following mes-
sage on the screen.
Press the “” button again to confirm the shut down. If the button 
is not pressed, the message will disappear after 15 seconds.
2. The cooling fans continue to operate for about 60 seconds for 
cooling cycle and the Power LED will turn...

English18
Installation
Adjusting the Projector’s Height
The projector is equipped with elevator feet for adjusting the 
image height.
 
Locate the adjustable foot you wish to modify on the underside of 1. 
the projector. 
 
Rotate the adjustable ring clockwise to raise the projector or 2. 
counter clockwise to lower it. Repeat with the remaining feet as 
needed.
Adjusting the Projected Image
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Adjusting the Projector’s Zoom / Focus
You may turn the zoom ring to...

English19
Installation
Adjusting Projection Image Size
Width
Height
Diagonal
Top View
Side View Projection Distance (D)
Projection Distance (D) Screen
Screen
Screen (W)
Screen (H)
Offset (Hd)
Diagonal length (inch) size of 16:9 Screen
Screen Size W x HProjection Distance (D)Offset (Hd)(m)(feet)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
380.84 0.47 2.76 1.55 --1.51 --4.97 0.08 0.25 
451.00 0.56 3.27 1.84 1.49 1.79 4.89 5.88 0.09 0.29 
501.11 0.62 3.63 2.04 1.66 1.99 5.45 6.54 0.10 0.33...

English20
User Controls
Remote Control
Using the Remote Control
Power OnTurn on the projector.
Power OffTurn off the projector.
Lamp ModeIncrease the brightness of the image.
Mode
Select the display mode from Cinema, 
Bright, Photo, Reference, 3D, ISF Day, ISF 
Night and User.
4:3Scale the image to 4:3 aspect ratio.
16:9Scale the image to 16:9 aspect ratio.
LBX
Enable the viewing of the letterboxed nonan-
amorphically enhanced movie at full screen 
width. Part of the original image will be lost if 
the...