Optoma Hd33 B Projector User Manual

							English1
Table of Contents
Table of Contents ........................1
Usage Notice  ...............................2
Safety Information .......................................2
Precautions  .................................................3
Eye Safety Warnings ...................................6
Introduction  .................................7
Package Overview  ......................................7
Product Overview ........................................8
Main Unit ..........................................................8
Connection Ports  .............................................9
Remote Control ..............................................10
Installation  .................................11
Connecting the Projector ...........................11
Connect to Computer/Notebook ................11
Connect to Video  .......................................12
Connect to 3D Video Devices  ...................13
Using the 3D glasses ................................15
Powering On/Off the Projector  ..................16
Powering On the Projector .............................16
Powering Off the Projector  .............................17
Warning Indicator  ...........................................17
Adjusting the Projected Image  ..................18
Adjusting the Projector’s Height.....................18
Adjusting the Projector’s Zoom / Focus .........18
Adjusting Projection Image Size  ....................19
User Controls  ............................20
Remote Control .........................................20
On-screen Display Menus .........................22
How to operate  ..............................................22
Menu Tree .................................................23
IMAGE  ...........................................................25
IMAGE | Advanced  ........................................27
IMAGE | Advanced | PureEngine ...................28
IMAGE | Advanced | Color Settings  ...............29
DISPLAY  ........................................................31
DISPLAY | 3D  ................................................33
SYSTEM ........................................................35
SYSTEM | Lamp Settings  ..............................37
SETUP ...........................................................38
SETUP | Signal -RGB Source........................40
SETUP | Signal -Video Source  ......................41
Appendices ................................42
Troubleshooting  .........................................42
Image Problems .............................................42
Other Problems ..............................................44
Remote Control Problems  .............................44
LED Lighting Messages .................................45
On Screen Messages  ....................................46
Replacing the Lamp  ..................................47
Compatibility Modes ..................................49
RS232 Commands and Protocol Function List .............................................................52
RS232 Pin Assignments  ................................52
RS232 Protocol Function List ........................53
Ceiling Mount Installation ..........................56
Optoma Global Offices ..............................57
Regulation & Safety Notices ......................59
FCC Notice  ....................................................59
Declaration of Conformity for EU countries  ...60 
						

							English2
Usage Notice
The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous \
volt-age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servic\
-ing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian Inter-ference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install\
 the projector in a location that does not block ventilation.  As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that \
restricts air flow.2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or moisture.3. Do not install near heat sources such as radiators, heaters, stoves or a\
ny other apparatus such as amplifiers that emits heat.4. Clean only with dry cloth.5. Only use attachments/accessories specified by the manufacturer. 6. Do not use the unit if it has been physically damaged or abused. Physica\
l damage/abuse would be (but not limited to):Unit has been dropped. -Power supply cord or plug has been damaged. -Liquid has been spilled on to the projector. -Projector has been exposed to rain or moisture. -Something has fallen in the projector or something is loose inside. -Do not attempt to service the unit yourself. Opening or removing covers \
may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair.7. Do not let objects or liquids enter the projector. They may touch danger-ous voltage points and short out parts that could result in fire or electric shock.8. See projector enclosure for safety related markings.9. The unit should only be repaired by appropriate service personnel.
Safety Information 
						

							English3
Usage Notice
Please follow all warnings, precautions and mainte-
nance as recommended in this user’s guide.
When the lamp  ™reaches the end of its life, the pro-jector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the proce-dures listed under “Replacing the Lamp” section.
▀■ Warning-Do not look into the projector’s lens when the 
lamp is on. The bright light may hurt your eyes.
▀■ Warning-To reduce the risk of fire or electric shock, do 
not expose this projector to rain or moisture.
▀■ Warning-Please do not open or disassemble the projec-
tor as this may cause electric shock.
▀■ Warning-When replacing the lamp, please allow the unit 
to cool down.
▀■ Warning-This projector will detect the life of the lamp 
itself.  Please be sure to change the lamp when 
it shows warning messages.
▀■ Warning-Reset the “Lamp Reset” function from the on-
screen display “System|Lamp Setting” menu 
after replacing the lamp module.
▀■ Warning-When switching the projector off, please ensure 
the cooling cycle has been completed before 
disconnecting power. Allow 90 seconds for the 
projector to cool down.
▀■ Warning-Do not use lens cap when projector is in opera-
tion.
▀■ Warning-When the lamp is approaching to the end of 
its life time, the message “Replacement sug-
gested” will show on the screen. Please contact 
your local reseller or service center to change 
the lamp as soon as possible.
NOTE
Precautions  
						

							English4
Usage Notice
Do:
Turn off and unplug the power plug from the AC outlet before  ™
cleaning the product.
Use a soft dry cloth with mild detergent to clean the display hous- ™
ing.
Disconnect the power plug from AC outlet if the product is not be- ™
ing used for a long period of time.
Do not:
Block the slots and openings on the unit provided for ventilation. ™
Use abrasive cleaners, waxes or solvents to clean the unit. ™
Use under the following conditions: ™
In extremely hot, cold or humid environments. -
Ensure that the ambient room temperature is within 5°C ~  `
35°C
Relative humidity is 10% ~ 85% `
In areas susceptible to excessive dust and dirt. -
Near any appliance generating a strong magnetic field. -
In direct sunlight. -
Viewing 3D PROJECTOR using the 3D function
IMPORTANT SAFETY INFORMATION. READ THE FOLLOWING WARN-INGS BEFORE YOU OR YOUR CHILD USE THE 3D FUNCTION.
Warning
Children and teenagers may be more susceptible to health issues  ™
associated with viewing in 3D and should be closely supervised 
when viewing these images.
Photosensitive Seizure Warning and Other Health Risks
Some viewers may experience an epileptic seizure or stroke when  ™
exposed to certain flashing images or lights contained in certain 
Projector pictures or video games. If you suffer from, or have a 
family history of epilepsy or strokes, please consult with a medical 
specialist before using the 3D function.
Even those without a personal or family history of epilepsy or  ™
stroke may have an undiagnosed condition that can cause photo-
sensitive epileptic seizures. 
						

							English5
Usage Notice
Pregnant women, the elderly, sufferers of serious medical condi- ™
tions, those who are sleep deprived or under the influence of 
alcohol should avoid utilizing the unit’s 3D functionality.
If you experience any of the following symptoms, stop viewing 3D  ™
pictures immediately and consult a medical specialist: (1) altered 
vision; (2) light-headedness; (3) dizziness; (4) involuntary move-
ments such as eye or muscle twitching; (5) confusion; (6) nausea; 
(7) loss of awareness; (8) convulsions; (9) cramps; and/ or (10)\
 
disorientation. Children and teenagers may be more likely than 
adults to experience these symptoms. Parents should monitor 
their children and ask whether they are experiencing these symp-
toms.
Viewing 3D PROJECTOR may also cause motion sickness, per- ™
ceptual after effects, disorientation, eye strain and decreased pos-
tural stability. It is recommended that users take frequent breaks 
to lessen the potential of these effects. If your eyes show signs of 
fatigue or dryness or if you have any of the above symptoms, im-
mediately discontinue use of this device and do not resume using 
it for at least thirty minutes after the symptoms have subsided.
Watching 3D PROJECTOR while sitting too close to the screen  ™
for an extended period of time may damage your eyesight. The 
ideal viewing distance should be at least three times the screen 
height. It is recommended that the viewer's eyes are level with the 
screen.
Watching 3D PROJECTOR while wearing 3D glasses for an  ™
extended period of time may cause a headache or fatigue. If you 
experience a headache, fatigue or dizziness, stop viewing 3D 
PROJECTOR and rest.
Do not use the 3D glasses for any other purpose than for viewing  ™
3D PROJECTOR. Wearing the 3D glasses for any other purpose 
(as general spectacles, sunglasses, protective goggles, etc.) may 
be physically harmful to you and may weaken your eyesight.
Viewing in 3D may cause disorientation for some viewers. Accord- ™
ingly, DO NOT place your 3D PROJECTOR near open stairwells, 
cables, balconies, or other objects that can be tripped over, run 
into, knocked down, broken or fallen over. 
						

							English6
Usage Notice
▀■ Avoid staring/facing directly into the projector beam at all 
times. Keep your back to the beam as much as possible.
▀■ When projector is used in a classroom, adequately supervise 
students when they are asked to point out something on the 
screen.
▀■ In order to minimize the lamp power, use room blinds to re-
duce ambient light levels.
Eye Safety Warnings 
						

							English7
Introduction
Power Cord 1.8m
Unpack and inspect the box contents to ensure all parts listed 
below are in the box. If something is missing, please contact 
Optoma customer service.
Documentation:
	User’s Manual	Warranty Card	Quick Start Card
	WEEE Card
Due to different  ™applications in each Country, some regions may have differ-ent accessories.
Projector with lens capNOTE
Package Overview
IR Remote Control2 × AAA Batteries    
						

							English8
Introduction
Product Overview
Ventilation (outlet)1. 
Focus Ring2. 
IR Receiver3. 
Ventilation (inlet)4. 
Zoom Ring5. 
Tilt-Adjustment Feet6. 
Zoom Lens7. 
Main Unit
7
5
7
3
6
9
10
6
3
421
5
68
6
11
Lens Cap8. 
Power Socket9. 
Input / Output Connections10. 
Kensington11. TM Lock Port 
						

							English9
Introduction
Connection Ports
HDMI1 Input Connector1. 
HDMI2 Input Connector2. 
VGA-In/YPbPr Connector  3. 
(PC Analog Signal/Component Video Input/HDTV/YPbPr) 
Component Video Input Connector4. 
Composite Video Input Connector5. 
3D Sync Out (5V) Connector6. 
12V Trigger Relay (12V, 250mA)7. 
Lamp LED 8.  (Indicates the projector’s lamp status)
Temp LED 9.  (Indicates the projector’s temperature status)
Power Socket 10. 
USB Service11. 
RS-232 Connector (9-pin)12. 
Kensington13. TM Lock Port
Power LED 14.  (Indicates the projector’s status)
Power Button15. 
HDMI 1HDMI 2VGAYPbPrYGPb BPrR
VIDEO SERVICE RS-232
12V Trigger
3D SYNCOut (5V)
POWER
593
101213
6714
11
8
15
12V OUT
14
2   
						

							English10
Introduction
Remote Control
Power On1. 
Power Off2. 
16:93. 
Native4. 
PureEngine5. 
3D Format6. 
Enter7. 
Re-Sync8. 
VGA Source9. 
Video Source10. 
HDMI 2 Source11. 
YPbPr Source12. 
HDMI 1 Source13. 
Menu14. 
Source15. 
 
Lamp Mode16. 
Contrast17. 
Brightness18. 
LBX19. 
4:320. 
Mode21. 
Four Directional Select Keys  22. 
1
2
3
4
5
6
9
10
13
17
18
19
21
20
7
8
22
15
14
16
12
11