Optoma Hd33 B Projector User Manual
Have a look at the manual Optoma Hd33 B Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1077 Optoma manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English51 Appendices 3D Input Video Compatibility ™ Input Resolution HDMI 1.4a 3D Input Input Timing 1280 x 720p @ 50HzTop-and-Bottom 1280 x 720p @ 60HzTop-and-Bottom 1280 x 720p @ 50HzFrame packing 1280 x 720p @ 60HzFrame packing 1920 x 1080i @ 50 HzSide-by-Side (Half) 1920 x 1080i @ 60 HzSide-by-Side (Half) 1920 x 1080p @ 24 HzTop-and-Bottom 1920 x 1080p @ 24 HzFrame packing HDMI 1.3 3D Content 1920 x 1080i @ 50HzSide-by-Side (Half) While 3D Format is “SBS” 1920 x 1080i @ 60HzSide-by-Side (Half) 1280 x 720p @ 50HzSide-by-Side (Half) 1280 x 720p @ 60HzSide-by-Side (Half) 1920 x 1080i @ 50HzTop-and-Bottom While 3D Format is “Top and Bottom” 1920 x 1080i @ 60HzTop-and-Bottom 1280 x 720p @ 50HzTop-and-Bottom 1280 x 720p @ 60HzTop-and-Bottom 2D Input (include HDMI/VGA port) 1024 x 768 @ 120HzFrame sequentialAuto apply 3D Mode1024 x 768 @ 120HzFrame sequential 2D Input (include HDMI/VGA/Component/Composite port) 480iHQFSWhile 3D Format is “Frame sequential”576iHQFS
English52 Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments 315 68 Pin no.NameI/O (From Projector Side) 1NC__ 2RXDIN 3TXDOUT 4NC__ 5GNDSignal Ground 6NC__ 7RTS__ 8CTS__ 9NC__
English53 Appendices RS232 Protocol Function List HD33 Baud Rate 9600Note: There is a after all ASCII commands, 0D is the HEX code for in ASCII code Data Bits 8 Parity None Stop Bits 1 Flow Control None UART16550 FIFO Disable Projector Return (Pass): P ³³³³³³³³³³³³³³³³ Projector Return (Fail): F ~ XXX XX nCR Lead Code Projector ID Command IDspacevariable carriage return Function ASCIIPass Fail Power On/Off n=1/n=0 & 2~XX00 n PF Re-sync ~XX01 nPF Direct Source Commands HDMI 1 n=1~XX12 n P VGA 1 n=5 VGA 1 Component n=8 Video n=10 Component RCA n=14 HDMI 2 n=15 IMAGE Display Mode Cinema n=1~XX20 n PF Bright n=2 Photo n=3 Reference n=4 User n=5 ISF Day n=7 ISF Night n=8 3D n=9 Contrast n= -50 - +50~XX22 n PF Brightness n= -50 - +50~XX21 n PF Color n= -50 - +50~XX45 n PF Tint n= -50 - +50~XX44 n PF Sharpness n= 0 - +15~XX23 n PF Advanced Noise Reduction n= 0 - 10~XX196 n PF Gamma Film n=1~XX35 n PF Curve Type n=-7 - +7 ~XX182 n Offset n=-5 - +5~XX183 n Reset n=1 ~XX206 n Video n=2~XX35 n Curve Type n=-7 - +7~XX184 n Offset n=-5 - +5 ~XX185 n Reset n=1 ~XX207 n Graphics n=3~XX35 n Curve Type n=-7 - +7~XX186 n Offset n=-5 - +5 ~XX187 n Reset n=1 ~XX208 n Standard n=4~XX35 n Curve Type n=-7 - +7 ~XX188 n Offset n=-5 - +5~XX189 n Reset n=1 ~XX209 n OFF n=0 ~XX190 n LOW n=1~XX190 n MED n=2~XX190 n HIGH n=3 ~XX190 n 120Hz n=4 ~XX190 n OFF n=0~XX41 n 1 n=1~XX41 n 2 n=2~XX41 n 3 n=3 ~XX41 n OFF n=0~XX42 n 1 n=1~XX42 n 2 n=2~XX42 n 3 n=3~XX42 n 4 n=4~XX42 n 5 n=5~XX42 n OFF n=0 ~XX197 n H Split n=1 ~XX197 n V Split n=2~XX197 n RGB Gain/Bias Red Gain n= -50 - +50~XX24 n Green Gain n= -50 - +50~XX25 n Blue Gain n= -50 - +50~XX26 n Red Bias n= -50 - +50~XX27 n Green Bias n= -50 - +50~XX28 n Blue Bias n= -50 - +50~XX29 n Reset n=1 ~XX33 n Color Temperature W arm n=1 ~XX210 n Medium n=2 ~XX210 n Cold n=3 ~XX210 n Color Space Auto n=1~XX37 n PF RGB (0-255)* n=2 RGB(16 - 235)* n=4 YUV n=3 DISPLAY Format 4:3 n=1~XX60 n PF 16:9 n=2 LBX n=5 Native n=6 Auto235 n=8 n=9 Edge Mask n=0-5~XX61 n PF Zoom n=0-10~XX62 n PF n= -50 - +50 ~XX64 n PF V Keystone n= -30 - +30~XX66 n PF 3D 3D Mode DLP Link/VESA 3D n=1/n=2 ~XX230 n PF 3D->2D 3D / L / R 2D->2D; 3D->3D / 3D->L /3D-> Rn=1/n=2/n=3 ~XX400 n PF 3D Format ~XX405 n 3D Sync. Invert On/Off n=0/n=1~XX231 n Off n=0~XX199 n PF On (16:9) n=1 On (2.35:1) n=2 Auto n=3 Optoma Data and HT Projectors XX=01À99, projectors ID, XX=00 is for all projectors PureEngine PureMotion PureDetailPureColor PureEngine Demo Color Settings / RGB Gain/Bias * RGB (0-255) supports when HDMI is detected *RGB(16 - 235)supports when HDMI is detected SuperWide V Image Shift (16:9) Off/SBS/Top and Bottom/Frame Sequential Decoding HDMI1.3 3D timing n=0/n=1/ n=3/n-4 SuperWide HD33 Baud Rate 9600Note: There is a after all ASCII commands, 0D is the HEX code for in ASCII code Data Bits 8 Parity None Stop Bits 1 Flow Control None UART16550 FIFO Disable Projector Return (Pass): P ³³³³³³³³³³³³³³³³ Projector Return (Fail): F ~ XXX XX nCR Lead Code Projector ID Command IDspacevariable carriage return Function ASCIIPass Fail Power On/Off n=1/n=0 & 2~XX00 n PF Re-sync ~XX01 nPF Direct Source Commands HDMI 1 n=1~XX12 n P VGA 1 n=5 VGA 1 Component n=8 Video n=10 Component RCA n=14 HDMI 2 n=15 IMAGE Display Mode Cinema n=1~XX20 n PF Bright n=2 Photo n=3 Reference n=4 User n=5 ISF Day n=7 ISF Night n=8 3D n=9 Contrast n= -50 - +50~XX22 n PF Brightness n= -50 - +50~XX21 n PF Color n= -50 - +50~XX45 n PF Tint n= -50 - +50~XX44 n PF Sharpness n= 0 - +15~XX23 n PF Advanced Noise Reduction n= 0 - 10~XX196 n PF Gamma Film n=1~XX35 n PF Curve Type n=-7 - +7 ~XX182 n Offset n=-5 - +5~XX183 n Reset n=1 ~XX206 n Video n=2~XX35 n Curve Type n=-7 - +7~XX184 n Offset n=-5 - +5 ~XX185 n Reset n=1 ~XX207 n Graphics n=3~XX35 n Curve Type n=-7 - +7~XX186 n Offset n=-5 - +5 ~XX187 n Reset n=1 ~XX208 n Standard n=4~XX35 n Curve Type n=-7 - +7 ~XX188 n Offset n=-5 - +5~XX189 n Reset n=1 ~XX209 n OFF n=0 ~XX190 n LOW n=1~XX190 n MED n=2~XX190 n HIGH n=3 ~XX190 n 120Hz n=4 ~XX190 n OFF n=0~XX41 n 1 n=1~XX41 n 2 n=2~XX41 n 3 n=3 ~XX41 n OFF n=0~XX42 n 1 n=1~XX42 n 2 n=2~XX42 n 3 n=3~XX42 n 4 n=4~XX42 n 5 n=5~XX42 n OFF n=0 ~XX197 n H Split n=1 ~XX197 n V Split n=2~XX197 n RGB Gain/Bias Red Gain n= -50 - +50~XX24 n Green Gain n= -50 - +50~XX25 n Blue Gain n= -50 - +50~XX26 n Red Bias n= -50 - +50~XX27 n Green Bias n= -50 - +50~XX28 n Blue Bias n= -50 - +50~XX29 n Reset n=1 ~XX33 n Color Temperature W arm n=1 ~XX210 n Medium n=2 ~XX210 n Cold n=3 ~XX210 n Color Space Auto n=1~XX37 n PF RGB (0-255)* n=2 RGB(16 - 235)* n=4 YUV n=3 DISPLAY Format 4:3 n=1~XX60 n PF 16:9 n=2 LBX n=5 Native n=6 Auto235 n=8 n=9 Edge Mask n=0-5~XX61 n PF Zoom n=0-10~XX62 n PF n= -50 - +50 ~XX64 n PF V Keystone n= -30 - +30~XX66 n PF 3D 3D Mode DLP Link/VESA 3D n=1/n=2 ~XX230 n PF 3D->2D 3D / L / R 2D->2D; 3D->3D / 3D->L /3D-> Rn=1/n=2/n=3 ~XX400 n PF 3D Format ~XX405 n 3D Sync. Invert On/Off n=0/n=1~XX231 n Off n=0~XX199 n PF On (16:9) n=1 On (2.35:1) n=2 Auto n=3 Optoma Data and HT Projectors XX=01À99, projectors ID, XX=00 is for all projectors PureEngine PureMotion PureDetailPureColor PureEngine Demo Color Settings / RGB Gain/Bias * RGB (0-255) supports when HDMI is detected *RGB(16 - 235)supports when HDMI is detected SuperWide V Image Shift (16:9) Off/SBS/Top and Bottom/Frame Sequential Decoding HDMI1.3 3D timing n=0/n=1/ n=3/n-4 SuperWide
English54 Appendices ~XXX XX nCR Lead Code Projector ID Command IDspacevariable carriage return SYSTEM Menu Location Top Left n=1~XX72 n PF Top Right n=2 n=3 Bottom Left n=4 Bottom Right n=5 Lamp Setting Lamp Hour Lamp hour n=1/ n=2 ~XX108 nF Lamp Reminder On/Off n=1/n=0 & 2~XX109 n PF Lamp Mode Bright/STD/ Image AI n=1/n=2/n=3~XX110 n PF Lamp Reset Yes n=1~XX111 n PF No n=2 Projection Front-Desktop n=1~XX71 n PF Rear-Desktop n=2 Front-Ceiling n=3 Rear-Ceiling n=4 Test Pattern Off / Grid / White n=0/n=1/n=2 ~XX195 n Background Color Blue n=1~XX104 n PF Black n=2 Grey n=6 12v Trigger Off\On n=0/n=1~XX192 n SETUP Language English n=1~XX70 n PF German n=2 French n=3 Italian n=4 Spanish n=5 Portuguese n=6 Polish n=7 Dutch n=8 Swedish n=9 Norwegian/Danish n=10 Finnish n=11 Greek n=12 Traditional Chinese n=13 Simplified Chinese n=14 Japanese n=15 Korean n=16 Russian n=17 Hungarian n=18 Czech n=19 Arabic n=20 Thai n=21 Turkish n=22 Input Source HDMI 1 n=1~XX39 n PF HDMI 2 n=7 VGA n=5 n=8 Video n=10 Source Lock On/Off n=1/n=0 & 2 ~XX100 nPF High Altitude On/Off n=1/n=0 & 2~XX101 n PF Information Hide On/Off n=1/n=0 & 2 ~XX102 nPF Auto Power Off (min) n=0-180 ~XX106 n PF Signal Automatic Enable/Disable n=1/n=0 ~XX91 n n=0~ 100 ~XX73 n PF Phase n= -50 - +50~XX74 n PF H. Position n= -50 - +50~XX75 n PF V. Position n= -50 - +50~XX76 n PF White level n=-50-+50 ~XX200 n Black level n=-50-+50 ~XX201 n Saturation n=-50-+50 ~XX202 n Hue n=-50-+50 ~XX203 n IRE 0 IRE / 7.5 IRE n=1/n=0~XX204 n Reset Yes n=1 ~XX112 n PF No n=2 Projector ID n = 00 - 99 ~XX79 nPF Reset System Alert n=1~XX99 n PF Information from Projector Automatically when: Standby Mode a=0 Warming up a=1 Cooling Down a=2 Out of Range a=3 Lamp Fail a=4 Thermal Switch Error a=5 Fan Lock a=6 Over Temperature a=7 Lamp Hours Running Out a=8 READ/Return Information from projector Information n=1~XX150 n a = Power State Off\On a=0/1 b = Lamp Hour c = Input Source Commands None c=00 VGA c=02 Video c=05 HDMI1 c=07 HDMI2 c=08 Component c=11 d = Firmware Version e = Display mode None e=0 Cinema e=1 Bright e=2 Movie e=3 e=4 User(1) e=5 User2 e=6 ISF Day e=7 ISF Nigh e=8 3D e=9 Model Name ~XX151 na=1 HD83 a=2 HD33 Depends a=0/1/2 RS232 Version No n=1 ~XX152 n Depends a=?? Input Source Commands n=1 ~XX121 n a=0/2//5//7/8/11 Software Version n=1~XX122 n Display Mode n=1 ~XX123 n Power State On/Off n=1~XX124 n a=1/0 Brightness n=1~XX125 n Centre nnnn 3 x RCA Comnponent Frequency \Tracking INFOa INFO a INFO a INFO a Okabbbbccdddde bbbb dddd sRGB Oka Ok a None/ VGAVideo/HDMI1/HD MI2/Component Oka Okdddd Cinema /Bright/Photos/Refer ence/User/ ISF Day/ISF Night/3D Oka a=1/2/3/4/5/7/8/9 Cinema=1Bright=2 Photo=3 Reference=4 User=5 ISFDay=7 ISFNight=8 3D=9 Oka Oka
English55 Appendices ~XXX XX nCR Lead Code Projector ID Command IDspacevariable carriage returnContrast n=1 ~XX126 n Format n=1 ~XX127 n Color Temperature Warm/Medium/Cold n=1 ~XX128 n Projection Mode n=1 ~XX129 n RS232 Commands for HD33 Remote Remote Control Up/Page + n=10 ~XX140 n Left/Source n=11 Enter (for projection MENU) n=12 Right/Re-SYNC n=13 Down/Page - n=14 Menu n=20 Re-sync n=41Oka 4:3/16:9/LBX/Native/Auto23 5/SuperWide Okaa=1/2/5/6/8/9 for 4:3/16:9/LBX/Native/A uto235/SuperWide Oka a=0/1/2 Warm/Medium/Cold Front-Desktop Rear- Desktop Front-Ceiling Rear-Ceiling Oka a=0/1/2/3 for Front- Desktop/Rear-Desktop /Front-Ceiling/Rear- Ceiling
English56 Appendices Please note that ™ damage resulting from incorrect installation will invalidate the warranty. To prevent damage to your projector, please use the Optoma ceil -1. ing mount. If you wish to use a third party ceiling mount kit, please ensure the 2. screws used to attached a mount to the projector met the follow- ing specifications: Screw type: M4*3 `Maximum screw length: 10mm `Minimum screw length: 7.5mm ` Warning: 1. If you buy a ceiling mount from another company, please be sure to use the correct screw size. Screw size will vary depending on the thickness of the mounting plate. 2. Be sure to keep at least 10cm gap between the ceiling and the bottom of the projector. 3. Avoid installing the projector near a heat source. NOTE Ceiling Mount Installation 71.19 197.75 126.56 29.93 167.95197.88312.80 378.69 19.5762.43 46.89 83.65105.53
English57 Appendices Optoma Global Offices USA3178 Laurelview Ct.Fremont, CA 94538, USAwww.optomausa.com Canada2420 Meadowpine Blvd., Suite #105Mississauga, ON, L5N 6S2, Canadawww.optoma.ca Latin America3178 Laurelview Ct.Fremont, CA 94538, USAwww.optomausa.com Europe42 Caxton Way, The Watford Busi-ness Park Watford, Hertfordshire, WD18 8QZ, UKwww.optoma.euService Tel: +44 (0)1923 691865 Benelux BVRandstad 22-1231316 BW AlmereThe Netherlandswww.optoma.nl FranceBâtiment E81-83 avenue Edouard Vaillant 92100 Boulogne Billancourt, France SpainC/ José Hierro,36 Of. 1C 28522 Rivas VaciaMadrid,Spain For service or support please contact your local office. [email protected] [email protected] [email protected] +44 (0) 1923 691 800+44 (0) 1923 691 [email protected] +31 (0) 36 820 0253+31 (0) 36 548 9052 +33 1 41 46 12 20+33 1 41 46 94 [email protected] +34 91 499 06 06+34 91 670 08 32
English58 Appendices DeutschlandWiesenstrasse 21 WD40549 Düsseldorf,Germany ScandinaviaLerpeveien 253040 DrammenNorway PO.BOX 95153038 DrammenNorway KoreaWOOMI TECH.CO.,LTD.4F, Minu Bldg. 33-14, Kangnam-Ku, seoul,135-815, KOREA Japan東京都足立区綾瀬3-25-18株式会社オーエスエムサポートセンター: 0120-46-5040 Taiwan5F., No. 108, Minchiuan Rd.Shindian City,Taipei Taiwan 231, R.O.C.www.optoma.com.tw Hong KongUnit A, 27/F Dragon Centre,79 Wing Hong Street,Cheung Sha Wan,Kowloon, Hong Kong China5F, No. 1205, Kaixuan Rd.,Changning DistrictShanghai, 200052, China +49 (0) 211 506 6670+49 (0) 211 506 [email protected] +47 32 98 89 90+47 32 98 89 [email protected] +82+2+34430004+82+2+34430005 [email protected] +886-2-2218-2360+886-2-2218-2313services@optoma.com.twasia.optoma.com +852-2396-8968+852-2370-1222www.optoma.com.hk +86-21-62947376+86-21-62947375www.optoma.com.cn
English59 Appendices Regulation & Safety Notices This appendix lists the general notices of your projector. FCC Notice This device has been tested and found to comply with the limits for a Cl\ ass B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a resid\ ential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction\ s, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular\ installation. If this device does cause harmful interference to radio or\ television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the f\ ollowing measures:Reorient or relocate the receiving antenna. ™Increase the separation between the device and receiver. ™Connect the device into an outlet on a circuit different from that to which ™the receiver is connected. Consult the dealer or an experienced radio/television technician for hel\ p. ™ Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this projector. Operation Conditions This device complies with Part 15 of the FCC Rules. Operation is subject\ to the following two conditions:This device may not cause harmful interference and1. This device must accept any interference received, including interferenc\ e 2. that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l’intention des utilisateurs canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
English60 Appendices Declaration of Conformity for EU countries EMC Directive 2004/108/EC (including amendments) yLow Voltage Directive 2006/95/EC yR & TTE Directive 1999/5/EC (if product has RF function) y Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. Disposal instructions