OKI MC860dn User Manual

Specifications > 171
Network SpecificationConnectivity Ethernet 100Base-TX/10Base-T auto-negotiation  with RJ-45 connector
Network protocol TCP/IP: Network layer - ARP, IP, ICMP, IPv6
Transport layer - TCP, UDP
Application layer - LPR, FTP, TELNET, HTTP, IPP, 
DHCP/BOOTP, SMTP, WINS, SNMPv1/v3
NetBEUI:
SMB, NetBIOS
Netware:
Remote printer mode (max. 8 print servers)
Print server mode (max. 8 file server, 32 queues)
Encrypted password support (in print server mode)
NetWare6J/5J/4.1J (NDS, boundary)
SNMP...

Specifications > 172
Group dial 32 groups
Auto redial Yes
Sender ID Yes (max. 22 characters)
Transmission:
Broadcast Yes (max. 530 transmissions)
Delayed Yes (up to 100 transmissions; up to one month from current date/time)
F code Yes, using ITU standard sub address and pass code
F code polling Yes, using ITU stan dard sub address and pass code
PC fax Yes, from a pc application via fax driver
Receive:
Memory Yes, receives even when printer error or paper out  situation occurs
Remote Yes
F code Yes,...

Specifications > 173
Supported mail 
applicationMicrosoft Outlook 2000
Microsoft Outlook Express 5.0
Microsoft Outlook Express 6.0
Netscape Messenger 4.7
Netscape Messenger 4.73
Eudora 4.3.2J
Lotus Notes R5
Filing Specification Communication protocol FTP, HTTP, CIFS
File formats:
 B&W
 Grey/colour PDF, TIFF
PDF, TIFF, JPEG, XPS
Default file format PDF
Resolution 75, 100, 150, 200, 300, 400, 600 dpi
Default resolution 200 dpi
Max. number of profiles 50
Printing Speed 26 pages per minute colour 34 pages...

Specifications > 174
This device is not intended for use at visual display workplaces in compliance with 
BildscharbV.
Image drum life 20,000 pages at 3 pages per job
Belt life 80,000 letter pages at 3 pages per job
Fuser life 100,000 letter pages
ITEMSPECIFICATION
Downloaded From ManualsPrinter.com Manuals 

Appendix A - Moving and transporting > 175
Appendix A - Moving and transporting
Moving Your System
1.Enable mirror carriage transfer mode:
(a) Press the  SETUP button on th e control panel.
(b) On the touch screen, press  Admin Setup.
(c) Enter the administrator password and press  Enter.
(d) Press  User Install .
(e) Press the arrow symbol twice to vi ew page 3 of the User Install screen.
(f) Press  Mirror Carriage mode .
(g) At the prompt, press  Yes to confirm.
(h) If necessary, remove plugs (1) from...

Appendix A - Moving and transporting > 176
(j) On the touch screen, press Close.
(k) Press the  SETUP button on th e control panel.
(l) On the touch screen, press  Shutdown.
(m) On the touch screen, press  Yes to confirm shutdown.
2. Turn off the MFP and disconnect or remove the following:
• Power cord, earth wire
•Printer cable
• Paper in the paper cassette
3. Move the MFP to the new location.
WARNING!
This product is heavy; a minimum of  three people are required to 
lift it safely. 
NOTE
Be sure to...

Appendix A - Moving and transporting > 177
Transporting Your System 
1.Enable mirror carriage transfer mode:
(a) Press the  SETUP button on th e control panel.
(b) On the touch screen, press  Admin Setup.
(c) Enter the administrator password and press  Enter.
(d) Press  User Install .
(e) Press the arrow symbol twice to vi ew page 3 of the User Install screen.
(f) Press  Mirror Carriage mode .
(g) At the prompt, press  Yes to confirm.
(h) If necessary, remove plugs (1) from  the scanner lock locations...

Appendix A - Moving and transporting > 178
(i) Using the tool provided (2), lock the scanner at the two locations as shown.
(j) On the touch screen, press  Enter.
(k) Press the  SETUP button on th e control panel.
(l) On the touch screen, press  Shutdown.
(m) On the touch screen, press  Yes to confirm shutdown.
2. Turn off the MFP and disconnect or remove the following:
• Power cord, earth wire
•Printer cable
• Paper in the paper cassette
3. Pull the lever (a) firmly to release the lo ck and then gently...

Appendix A - Moving and transporting > 179
4.Press the cover release (a) and open the top cover (b) fully.
5. Lift each of the image drum units out of  the MFP and place them on a flat table.
6. Tape each junction of the image drum and toner cartridges with vinyl tape (1).
7. Re-install the image drum units back into the MFP.
8. Close the top cover and press down firm ly so that the cover latches closed.
WARNING!
If the MFP has been powered on, the  fuser will be hot. This area is 
clearly labelled. Do...

Appendix A - Moving and transporting > 180
9.Gently lower the scanner.
10. Protect the MFP with cushion  pads and put it in a box.
NOTE
It is recommended that you use the original box and packaging if available.
WARNING!
This product is heavy; a minimum of  three people are required to 
lift it safely. 
NOTE
Be sure to unlock the scanner before turning on the MFP after transportation 
and then disable the mirror carriage transfer mode.
Downloaded From ManualsPrinter.com Manuals