OKI MC860dn User Manual

Troubleshooting > 161
Error
410
411
412
413
 Toner Empty Toner empty.
410: Y
411: M
412: C
413: K
Warning status takes effect at Cover 
Open/Close. Allows printing approx. 50 
pages (A4 5% duty, density 5%).
Error
554
555
556
557 %COLOR% 
Toner Regional Mismatch 
%ERRCODE% OKI Regional mismatch: Incorrect toner 
cartridge fitted (incorrect signature ID; 
correct distribution channel group).
Replace with genuine toner cartridge. 
Error 554: Y
Error 555: M
Error 556: C
Error 557: K
Error
614
615
616
617...

Troubleshooting > 162
Error
540
541
542
543Please check 
%COLOR% Toner 
cartridge  %ERRCODE% If the code appears, contact your 
dealer.
Error 540: Y
Error 541: M
Error 542: C
Error 543: K
Error
401 Paper size error
Open & check the
flashing cover Inappropriate long paper was fed from 
a tray. Check whether multi feed has 
happened (
See “Clearing Paper Jams”  ). 
Open and close the cover to perform 
recovery printing, and continue.
Error
400 Paper size error
Open & check the
flashing cover Inappropriate...

Troubleshooting > 163
Error
370
371
373Paper jam!
Open & check the
flashing cover
Open the duplex cover, remove the 
paper and close the cover. 
Error 370: Duplex reversal
Error 371: Duplex input
Error 373: Multi-feed into duplex 
(duplex remain jam)
See “Clearing Paper Jams” 
.
If the code still appears, contact your 
dealer.
Error
372 Paper jam!
Open & check the
flashing cover Misfeed from duplex. Open the front 
cover, remove the paper and close the 
cover. 
See “Clearing Paper Jams” 
.
If the code...

Troubleshooting > 164
Error
544
545
546
547Please check 
%COLOR% Toner 
Cartridge:  %ERRCODE% Toner cartridge lever has not been 
locked. 
Lock into place securely.
Error 544: Y
Error 545: M
Error 546: C
Error 547: K
Error
340
341
342
343 Please check 
%COLOR% Image Drum Image drum not installed correctly.
Fit image drum.
Error 340: Y
Error 341: M
Error 342: C
Error 343: K
Error
320 Please check Fuser Unit Fuser unit is not installed correctly.
Fit fuser unit.
Error
330 Please check Belt Unit Belt unit...

Troubleshooting > 165
Error Check DataProgram Data Receive Error 
 An error has occurred while your 
machine’s network card firmware is 
being reprogrammed.
%DLCODE%
1. File size error.
2. Check-sum error.
3. Invalid printer model number
4. Invalid module I/F version
5. Invalid FAT version
Error Wait a Moment Program Data Writing Your machine’s network card firmware 
is being reprogrammed.
Error Power Off/On Program Data Written OK Your machines network card firmware 
has been reprogra
mmed...

Troubleshooting > 166
Error Writing FailedPress  key Indicates that file saving has failed; file 
is write-protected.
Error USB Memory disconnected Press  key Indicates that the USB memory was 
extracted and file saving has stopped.
Error Connect to PC Failed Press  key Machine has failed to connect to a PC.
Error Mirror Carriage Mode Mirror carriage is locked.
Turn screws at 2 places shown in the 
following figure, release the lock, and 
touch the [Release] button. The scanner mirror carriage is...

Troubleshooting > 167
Error Search Results Exceeded the Limit Search results from LDAP server exceeded the upper limit.
Error Search Root Error Search root not found in LDAP server.
Error Address Search Time-out Search failed; time-out error.
Error Getting Target IP Failed Check DHCP Settings DHCP server not found.
Note: Scan to Email, Scan to Network 
PC and Scan to Remote PC are 
unavailable during this status.
Error Check DNS Settings Press  key Failed to connect with DNS server.
Error Check Server...

Troubleshooting > 168
Error Inspection is required.%ERRCODE%: SIP Error Scan Image Processing has failed.
Switch the power supply off and then 
back on.
%ERRCODE%
1. RAM Check Error
2. Illegal parameters
3. Memory Overflow
4. Scanner Receiving Time-out
5. Others (Fatal Error)
Fatal
126 Power Off and Wait for a while
%ERRCODE%
: Condensing Error Water vapor has condensed into liquid 
droplets in the MFP. Turn off the MFP 
and wait for a while.
If a fatal code still appears, contact your 
dealer.
Fatal...

Specifications > 169
Specifications  
ITEMSPECIFICATION
General Dimensions 22.25 x 26.6 x 26.3 inches  (W x D x H) [565 x  658 x 669 mm]
Weight Approximately 147 lbs. (66.5 Kg) 
Power source Input: 120 or 240 VAC, 50 or 60 Hz
Power consumption Operating: 1300 W max. Normal operating: 700 W av. (77°F/25
oC)
Stand-by: 160 W av. (77°F/25
oC)
Power save mode: 25 W max.
Environmental:
Noise
Temperature
Humidity 

Specifications > 170
ADFReverse automatic 
document feed Yes, U-turn path double sided sheet through type
Document size 11.7 inches, 5 x 5.8 inches, longest 35.4 inches 297 mm, 128.5 x 148.5 mm, longest 900 mm
Document weight/
thickness Continuous Feed: 17 to 24 lb. US Bond (60 to 105 
g/m²) 
Single Sheet Feed: 17 to 28 lb. US Bond (60 to 
128 g/m²)
Paper feed Face up
Capacity 50 Letter sheets (20 lb. US Bond, 75 g/m²) 25 Tabloid sheets (20 lb. US Bond, 75 g/m²)
Scanner life 5 years or 80,000 scans
Copy...