OKI MC860cdxn User Manual

Configuring Your Machine > 51
Print Setup 
(cont.)
IBM PPR 
Setup 
(cont.)CR Function
CR, CR+LF Selects whether a received 
carriage return character (0Dh) 
also causes a line feed.
LF Function LF, LF+CR Selects whether a received line 
feed character (0Ah) also causes a 
carriage return.
Line Length 80 COLUMN, 136 
COLUMN Specifies the numbe
r of characters 
per line.
Form Length 11 Inch,  11.7 Inch, 
12 Inch Specifies the length of paper.
TOF Position 0.0 Inch  -  1.0  Inch Specifies the distance of...

Configuring Your Machine > 52
Print Setup 
(cont.)
EPSON FX 
Setup 
(cont.)Form Length 11 Inch, 
11.7 Inch, 
12 Inch Specifies the length of paper.
TOF Position 0.0 Inch  -  1.0  Inch Specifies the distance of print from 
the top edge of the paper.
Left Margin 0.0 Inch  -  1.0  Inch Specifies the distance of print from 
the left hand edge of the paper.
Fit to Letter Disable, Enable Sets the printing mode that can fit 
print data, equivalent to 11 inches 
(66 lines), in the LETTER-size 
printable area....

Configuring Your Machine > 53
Network 
Menu (cont.)
Network 
Setup 
(cont.)Subnet Mask
xxx.xxx.xxx.xxx Current assigned subnet mask. To 
change, proceed as above.
Display condition: TCP/IP protocol 
must be enabled.
Gateway 
Address xxx.xxx.xxx.xxx
Current assigned gateway 
address. To change, proceed as 
above.
Display condition: TCP/IP protocol 
must be enabled.
Web Disable,  EnableEnables or disables web config. 
facility.
Display condition: TCP/IP protocol 
must be enabled.
Telnet Disable, Enable...

Configuring Your Machine > 54
Network 
Menu (cont.)
Mail Server 
Setup 
(cont.)SMTP 
Encryption
None
, SMTPS, 
STARTTLS Select encryption method.
POP3 server Set the IP address or host name  for the POP3 server.
POP3 Port 00000 ~  00110 ~ 
65535 Set the port number.
POP3 Encryption None, POP3S, 
STARTTLS Select encryption method.
Authentication 
method None
, SMTP, POP Set the authentication method.
SMTP User ID User defined Set a user ID for the SMTP server.
SMTP password User defined Set a password...

Configuring Your Machine > 55
Network 
Menu (cont.)
SecurePrtc 
SrvSettingDomain Domain must be registered in the 
DNS server.
Management Standby  Screen 
SetupCopy Screen
1. Doc Type
2. Density
3. Tray
4. Zoom
5. SortDefault settings listed, these can 
be changed if required.
Fax Screen
1. Speed Dial
2. Doc. Type
3. Density
4. Redial
5. OffHook
Scanner Screen1. NetworkPC
2. E-mail
3. USB Memory
Default Mode Copy, Fax, Scan, 
Print
Address 
Book Tab 
Settings Fax
Do not register, All, 
Group01 -...

Configuring Your Machine > 56
Management 
(cont.)
Sound 
Setup 
(cont.)Fax Ringer
OFF, ON Select  ON to sound the fax ringer 
when a fax is received.
OPCompleteSou
ndVolume OFF, Low, 
Middle, 
High Select volume level for job 
complete acknowledgment.
OPCompleteSou
nd Copy Completed:
OFF, 
TYPE1 , TYPE2, 
TYPE3
Test Select sound option to 
acknowledge when a particular job 
type is completed.
Press 
Test to hear sound demo.
Transmission 
Completed:
OFF,  TYPE1 , TYPE2, 
TYPE3
Test
Rx Completed:
OFF,...

Configuring Your Machine > 57
Management 
(cont.)
Local 
InterfaceUSB Menu USB:
Enable, Disable Enable/disable communication 
through the USB interface.
Soft Reset:
Disable , Enable Enable/disable the soft reset 
command.
Speed:
480Mbps , 12Mbps Select the interface speed.
USB PS-Protocol:
ASCII,  Raw Select data format.
Offline Receive:
Disable , Enable Enable/disable offline receive.
Serial Number:
Disable,  Enable Enable/disable Serial Number.
Parallel Menu Parallel: Disable, Enable Enable/disable...

Configuring Your Machine > 58
Management 
(cont.)
System 
Setup 
(cont.)USB Memory 
interface
Disable, 
Enable Select disable to turn off scan to 
USB function.
Power Save Power Save  enable OFF, 
ON Enable/disable power save 
feature.
Power Save 
Time 5, 15, 
30, 60, 240 
minutes Select desired time
 interval before 
machine enters power save mode.
Memory 
Setup Receive Buffer 
Size Auto
, 0.5MB, 1MB, 
2MB, 4MB, 8MB, 
16MB, 32MB Specify the size of the buffer you 
want to use to receive data.
Resource...

Configuring Your Machine > 59
Management 
(cont.)
Reset 
SettingsExecute Continuing will automatically 
restart the system. Press Yes to 
continue or  No to cancel.
Job Log 
Clear Execute Continuing will
 clear the job logs. 
Press  Yes to continue or  No to 
cancel.
User Install Time Setup user defined Enter the current date and time 
using the numerical keypad and 
the on-screen arrows.
Set 
Daylight 
Saving OFF
, ON Enable/disable daylight saving 
setting.
Time Zone user defined Enter your countries...

Configuring Your Machine > 60
Job Programs Setting
Shutdown 
FEATUREOPTIONDESCRIPTION
Register Use the on-screen keyboard to enter and register a job  program.
Note: After registering the process, press the Job Programs 
button on the control panel to save. Refer to “Job Programs” 
on page 110.
Delete Select the job program numb er you wish to delete from the 
list.
Key Speed Fastest, Fast,  Normal, 
Slow Alter the speed at which 
each step is performed.
Edit Title User defined Select the macro number...