OKI MC860cdxn User Manual

							
Configuring Your Machine > 51
Print Setup 
(cont.)
IBM PPR 
Setup 
(cont.)CR Function
CR, CR+LF Selects whether a received 
carriage return character (0Dh) 
also causes a line feed.
LF Function LF, LF+CR Selects whether a received line 
feed character (0Ah) also causes a 
carriage return.
Line Length 80 COLUMN, 136 
COLUMN Specifies the numbe
r of characters 
per line.
Form Length 11 Inch,  11.7 Inch, 
12 Inch Specifies the length of paper.
TOF Position 0.0 Inch  -  1.0  Inch Specifies the distance of print from 
the top edge of the paper.
Left Margin 0.0 Inch  -  1.0  Inch Specifies the distance of print from 
the left hand edge of the paper.
Fit to Letter Disable, Enable Sets the printing mode that can fit 
print data, equivalent to 11 inches 
(66 lines), in the LETTER-size 
printable area.
Text Height Same, Diff Sets the heig ht of a character.
SAME: Regardless of CPI, same 
height
DIFF: As CPI, character heights 
vary.
Cont Paper 
Mode OFF
, ON If you have multiple feed trays 
installed in which the media is the 
same size and type you can enable 
continuous paper mode. When one 
tray runs out of paper, the unit will 
switch to another tray.
EPSON FX 
Setup Character Pitch
10 CPI, 12 CPI, 17 
CPI, 20 CPI, 
PROPORTIONAL Specifies character pitch in this 
emulation.
Font Condense 12CPI - 20CPI, 
12CPI - 12CPI Specifies 12CPI pitch for Condense 
Mode.
Character Set SET-1,  SET-2Specifies a character set.
Symbol Set IBM 437 Specifies a symbol set.
Letter 0 Style Disable, Enable Specifies the style that replaces 
9BH with letter o and 9DH with a 
zero
Zero Character Normal, Slashed Sets the zero to be slashed or 
unslashed.
Line Pitch 6 LPI, 8 LPI Specifies the line spacing.
White Page Skip OFF, ON Selects whether blank pages are 
printed or not.
CR Function CR, CR+LF Selects whether a received 
carriage return character (0Dh) 
also causes a line feed.
Line Length 80 COLUMN, 136 
COLUMN Specifies the numbe
r of characters 
per line.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 52
Print Setup 
(cont.)
EPSON FX 
Setup 
(cont.)Form Length 11 Inch, 
11.7 Inch, 
12 Inch Specifies the length of paper.
TOF Position 0.0 Inch  -  1.0  Inch Specifies the distance of print from 
the top edge of the paper.
Left Margin 0.0 Inch  -  1.0  Inch Specifies the distance of print from 
the left hand edge of the paper.
Fit to Letter Disable, Enable Sets the printing mode that can fit 
print data, equivalent to 11 inches 
(66 lines), in the LETTER-size 
printable area.
Text Height Same, Diff Sets the heig ht of a character.
SAME: Regardless of CPI, same 
height
DIFF: As CPI, character heights 
vary.
Cont Paper 
Mode OFF
, ON If you have multiple feed trays 
installed in which the media is the 
same size and type you can enable 
continuous paper mode. When one 
tray runs out of paper, the unit will 
switch to another tray.
Network 
Menu Network 
SetupTCP/IP Disable, 
EnableEnables or disables this network 
protocol.
IP Version IPv4, IPv4 + IPv6 Set up the IP version.
Display condition: TCP/IP protocol 
must be enabled.
NetBEUI Disable, Enable Enables or disables this network 
protocol.
NetBIOS over 
TCP Disable, 
Enable Enables or disables this network 
protocol.
Display condition: TCP/IP protocol 
must be enabled.
NetWare Disable,  EnableEnables or disables this network 
protocol.
EtherTalk Disable,  EnableEnables or disables this network 
protocol.
Frame Type Auto, 802.2, 802.3, 
ETHERNET II, SNAP Selects the Ethe
rnet MAC layer 
frame type.
Display condition: Netware must 
be enabled.
IP Address Set Manual,  AutoSpecifies whether IP address 
allocation is automatic (DHCP) or 
manually assigned.
Display condition: TCP/IP protocol 
must be enabled.
IPv4 address xxx.xxx.xxx.xxx Current assigned IP address. 
To change, enter the address 
using the numerical keypad. Press 
Enter  to register new address.
Display condition: TCP/IP protocol 
must be enabled.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 53
Network 
Menu (cont.)
Network 
Setup 
(cont.)Subnet Mask
xxx.xxx.xxx.xxx Current assigned subnet mask. To 
change, proceed as above.
Display condition: TCP/IP protocol 
must be enabled.
Gateway 
Address xxx.xxx.xxx.xxx
Current assigned gateway 
address. To change, proceed as 
above.
Display condition: TCP/IP protocol 
must be enabled.
Web Disable,  EnableEnables or disables web config. 
facility.
Display condition: TCP/IP protocol 
must be enabled.
Telnet Disable, Enable Enables or disables Telnet config. 
facility.
Display condition: TCP/IP protocol 
must be enabled.
FTP Disable,  Enable Enables or di sables communication 
via FTP.
Display condition: TCP/IP protocol 
must be enabled.
IPSec Disable, Enable Enable via the web page or 
Configuration Tool.
SNMP Disable,  EnableEnables or disables SNMP of FTP 
(TCP/IP or NetWare).
Display condition: TCP/IP protocol 
must be enabled.
Network Scale Small,  NormalNormal: Can work effectively even 
when connected to a HUB that has 
a spanning tree fe ature. However, 
printer start up time gets longer 
when computers are connected to 
two or three small LANs.
Small: Computers can cover from 
two or three small LANs to a large 
LAN, but it may not work 
effectively when it is connected to 
a HUB with a spanning tree 
feature.
HUB Link 
Setting Auto Negotiate
, 
100BASE-TX FULL, 
100BASE-TX HALF, 
10BASE-T FULL, 
10BASE-T HALF Sets the hub linking method.
Network PS-
Protocol ASCII, 
RAW Select PostScript data format for 
the network port.
Factory Defaults Execute Select Yes to reload the settings 
present when the unit was setup 
by the manufacturer.
Mail Server 
Setup SMTP server Set the host
 name for the SMTP 
server.
SMTP Port 00000 ~  00025 ~ 
65535 Set the port number. 
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 54
Network 
Menu (cont.)
Mail Server 
Setup 
(cont.)SMTP 
Encryption
None
, SMTPS, 
STARTTLS Select encryption method.
POP3 server Set the IP address or host name  for the POP3 server.
POP3 Port 00000 ~  00110 ~ 
65535 Set the port number.
POP3 Encryption None, POP3S, 
STARTTLS Select encryption method.
Authentication 
method None
, SMTP, POP Set the authentication method.
SMTP User ID User defined Set a user ID for the SMTP server.
SMTP password User defined Set a password for the SMTP 
server.
POP User ID User defined Set a user ID for the POP3 server.
POP password User defined Set a password for the POP3 
server.
LDAP 
Server 
Setting Server Setting LDAP Server:
user defined Set the host name for the LDAP 
server.
Port No.:
00001 ~  00389 ~ 
65535 Set the port number.
Timeout:
010 ~  030 ~ 120 Enter the LDAP server timeout in 
seconds.
Max. Entries:
005 ~  100 Set the maximum number of 
search results from the LDAP 
server.
Search Root: Enter  the desired root.
Attr Name1: cn Edit the LDAP search attribute if 
required.
Name2:
sn
Name3:
givenName
E-mail Address:
mail
Addnl Filter:
Authentication Method: Anonymous, 
Simple, Digest-MD5, 
Secure Protocol Set the authentication method for 
LDAP.
User ID:
user defined Set a user ID for the LDAP server.
Password:
user defined Set a password for the LDAP 
server.
Encryption None, LDAPS, 
STARTTLS Set the encryption method.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 55
Network 
Menu (cont.)
SecurePrtc 
SrvSettingDomain Domain must be registered in the 
DNS server.
Management Standby  Screen 
SetupCopy Screen
1. Doc Type
2. Density
3. Tray
4. Zoom
5. SortDefault settings listed, these can 
be changed if required.
Fax Screen
1. Speed Dial
2. Doc. Type
3. Density
4. Redial
5. OffHook
Scanner Screen1. NetworkPC
2. E-mail
3. USB Memory
Default Mode Copy, Fax, Scan, 
Print
Address 
Book Tab 
Settings Fax
Do not register, All, 
Group01 - Group32, 
Numeric List, ABC, 
DEF, GHI, JKL, MNO, 
PQRS, TUV, WXYZ, 
Symbol Maximum of three destination tabs 
can be registered to display on the 
standby screen.
E-mail Do not register, All, 
Group01 - Group32, 
Numeric List, ABC, 
DEF, GHI, JKL, MNO, 
PQRS, TUV, WXYZ, 
Symbol Maximum of three destination tabs 
can be registered to display on the 
standby screen.
Auto Reset 
Time Copy screen
Reset Time:
01~03~10 minutes Select the requir
ed screen reset 
interval.
Reset After Scan:
OFF , ON Specify whether or not to reset 
once scan job is complete.
Fax Screen Reset Time: 01~03~10 minutes Select the requir
ed screen reset 
interval.
Scanner Screen Reset Time: 01~05~10 minutes Select the requir
ed screen reset 
interval.
Reset After Scan:
OFF , ON Specify whether or not to reset 
once scan job is complete.
Sound 
Setup Volume OFF, Low, 
Middle, 
High Select volume level.
Key Touch 
Volume OFF, Low, 
Middle, 
High Select key touch volume level.
Key Touch Tone Fax:  High, Mid, Low
Copy: 
High, Mid,  Low
Scan: 
High, Mid,  Low Select key touch tone.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 56
Management 
(cont.)
Sound 
Setup 
(cont.)Fax Ringer
OFF, ON Select  ON to sound the fax ringer 
when a fax is received.
OPCompleteSou
ndVolume OFF, Low, 
Middle, 
High Select volume level for job 
complete acknowledgment.
OPCompleteSou
nd Copy Completed:
OFF, 
TYPE1 , TYPE2, 
TYPE3
Test Select sound option to 
acknowledge when a particular job 
type is completed.
Press 
Test to hear sound demo.
Transmission 
Completed:
OFF,  TYPE1 , TYPE2, 
TYPE3
Test
Rx Completed:
OFF,  TYPE1 , TYPE2, 
TYPE3
Test
Rx Print Completed:
OFF,  TYPE1 , TYPE2, 
TYPE3, Voice
Test
E-mail sent 
Completed:
OFF,  TYPE1 , TYPE2, 
TYPE3
Test
Report Print 
Completed:
OFF,  TYPE1 , TYPE2, 
TYPE3
Test
PC Print Completed.:
OFF,  TYPE1 , TYPE2, 
TYPE3
Test
Flatbed Scan 
Completed.:
OFF,  TYPE1 , TYPE2, 
TYPE3
Test
Paper Jam Alert OFF,  ONSelect ON to sound an alarm to 
alert the user in the event of a 
paper jam occurring.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 57
Management 
(cont.)
Local 
InterfaceUSB Menu USB:
Enable, Disable Enable/disable communication 
through the USB interface.
Soft Reset:
Disable , Enable Enable/disable the soft reset 
command.
Speed:
480Mbps , 12Mbps Select the interface speed.
USB PS-Protocol:
ASCII,  Raw Select data format.
Offline Receive:
Disable , Enable Enable/disable offline receive.
Serial Number:
Disable,  Enable Enable/disable Serial Number.
Parallel Menu Parallel: Disable, Enable Enable/disable communication 
through the parallel interface.
Bi-Direction:
Disable,  Enable Enable/disable Bi-Direction.
EPC:
Disable,  Enable Enable/disable EPC.
ACK Width:
Narrow , Medium, 
Wide Specify acknowledgment width.
ACK/BUSY Timing:
ACK In Busy , ACK 
While Busy Specify acknowledgment timing.
I-PRIME:
Disable , 3 Micro 
Sec, 50 Micro Sec Specify I-PRIME setting.
Parallel PS-Protocol:
ASCII , Raw Select data format.
Offline Receive:
Disable , Enable Enable/disable offline receive.
System 
Setup Access Control PIN, User/Password, 
Disable Enable access control to restrict 
usage to authorized user only.
User Auth. 
Method Local
, LDAP, Secure 
Protocol Condition for display: Access 
Control must be set to User/
Password.
Unit of Measure inch,  millimeterSelect unit of measure.
Date Format m m/dd/yyyy, 
dd/mm/yyyy, 
yyyy/mm/dd Select desired date format.
Allow all reports 
to print Disable, 
Enable Enable/disable report printing.
Near Life LED Disable,  EnableEnable/disable near life LED.
Address info 
lock timeout 01~
03
~10 minutes Enter time-out duration.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 58
Management 
(cont.)
System 
Setup 
(cont.)USB Memory 
interface
Disable, 
Enable Select disable to turn off scan to 
USB function.
Power Save Power Save  enable OFF, 
ON Enable/disable power save 
feature.
Power Save 
Time 5, 15, 
30, 60, 240 
minutes Select desired time
 interval before 
machine enters power save mode.
Memory 
Setup Receive Buffer 
Size Auto
, 0.5MB, 1MB, 
2MB, 4MB, 8MB, 
16MB, 32MB Specify the size of the buffer you 
want to use to receive data.
Resource Save Auto,  OFF, 0.5MB, 
1MB, 2MB, 4MB, 
8MB, 16MB, 32MB Specify the size of the buffer you 
want to use for resource saving.
Flash 
Memory 
Setup Initialize Making changes will automatically 
restart the system. Press Yes to 
continue or  No to cancel.
Condition for display: 
Storage Maint Setup -> Initial 
Lock  must be set to Disable.
HDD Setup Initialize Making ch anges will automatically 
restart the system. Press  Yes to 
continue or  No to cancel.
Condition for display: 
Storage Maint Setup -> Initial 
Lock  must be set to Disable.
Format Partition PCL, Common, PS Making changes will automatically 
restart the system. Press  Yes to 
continue or  No to cancel.
Condition for display: 
Storage Maint Setup -> Initial 
Lock  must be set to Disable.
Storage 
Maint 
Setup Check File 
System
Execute Making changes will automatically 
restart the system. Press  Yes to 
continue or  No to cancel.
Check All 
Sectors Execute Making changes will automatically 
restart the system. Press  Yes to 
continue or  No to cancel.
HDD Erase Execute Making changes will automatically 
restart the system. Press Yes to 
continue or  No to cancel.
Initial Lock Disable,  EnableEnable/disable initial lock.
Encryption 
Setup Job Limitation
Disable, Encrypted 
Job Enable/disable limitation setting.
Language 
Maint 
Setup Initialize Making changes will automatically 
restart the system. Press Yes to 
continue or  No to cancel.
Admin 
Password User defined
Enter new password.
Retype your password when 
prompted to verify.
Note: password must be six 
characters or more.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 59
Management 
(cont.)
Reset 
SettingsExecute Continuing will automatically 
restart the system. Press Yes to 
continue or  No to cancel.
Job Log 
Clear Execute Continuing will
 clear the job logs. 
Press  Yes to continue or  No to 
cancel.
User Install Time Setup user defined Enter the current date and time 
using the numerical keypad and 
the on-screen arrows.
Set 
Daylight 
Saving OFF
, ON Enable/disable daylight saving 
setting.
Time Zone user defined Enter your countries time zone in 
relation to GMT, using the 
numerical keypad and the on-
screen arrows.
Comm. 
Line Tone
, Pulse Select the appropriate dialling 
method for the region you are in.
Reception 
Mode Fax Ready Mode
Tel/Fax Ready Mode
Fax/Tel Ready Mode
Ans/Fax Ready Mode
Tel Ready Mode Specify the reception mode.
Dial Tone 
Detection OFF
, ON Enable/disable di al tone detection.
Busy Tone 
Detection OFF, 
ON Enable/disable busy tone 
detection.
Monitor 
Control OFF
, Type 1, Type 2 Specify the monitor control 
setting.
TTI 
Register/
Edit TTI 1, TTI 2, TTI 3 Registe
r/Edit transmit terminal 
identification (TTI) settings.
Standard 
TTI TTI 1, TTI 2, TTI 3 Select default TTI from the 
registered list.
TTI Number Use the numeric keypad and on- screen buttons to enter your fax 
number.
TTI 
calendar 
type yyyy/mm/dd
mm/dd/yyyy
dd/mm/yyyy Specify the TTI calendar date 
format.
Super G3 OFF,  ON OFF=G3, ON=SuperG3
Mirror 
Carriage 
mode Yes, No If you need to move your machine 
for any reason enable Mirror 
Carriage mode to prevent any 
damage to the mirror carriage.
Refer to “Appendix A - Moving and 
transporting” on page 175 for full 
details.
Erase 
Privacy 
Data Yes, No Continuing will delete all settings 
and registered data.
FEATUREOPTIONDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							
Configuring Your Machine > 60
Job Programs Setting
Shutdown 
FEATUREOPTIONDESCRIPTION
Register Use the on-screen keyboard to enter and register a job  program.
Note: After registering the process, press the Job Programs 
button on the control panel to save. Refer to “Job Programs” 
on page 110.
Delete Select the job program numb er you wish to delete from the 
list.
Key Speed Fastest, Fast,  Normal, 
Slow Alter the speed at which 
each step is performed.
Edit Title User defined Select the macro number and use the on-screen keyboard to 
edit the title.
NOTE
This item should always be selected before switching the printer off, to ensure 
that no hard disk data is lost.
FEATUREOPTIONDESCRIPTION
Shutdown Yes, No Select  Yes to perform a controlled shutdown of the unit, ensuring that 
all files on the internal hard disk ar e closed before power is turned off. 
Only power the unit off when the di splay indicates that shutdown is 
complete.
Note: If you are shutting down the  unit before moving it to another 
location, refer to “Appendix A - Moving and transporting” on page 175 
for full instructions.
Downloaded From ManualsPrinter.com Manuals