OKI MC860cdxn User Manual

Configuring Your Machine > 31
Store Doc Settings
Select Tray  FaxTray 1, 2 and 3: 
OFF, ON(*),  ON
MPTray: 
OFF , ON(*), ON Fax: Set tray for received Fax.
Tray usage, priority given to trays set 
to ON(*), then ON. If tray is set to 
OFF, it will not be used.
Fax printing will only occur when the 
selected tray is defined as containing 
PLAIN media type.
Copy Tray 1:
OFF, ON(*) , ON
Tray 2 and 3:
OFF, ON(*),  ON
MPTray:  
OFF , ON(*), ON Copy: Set tray for copy jobs.
If Tray Selection is set to “Auto”:...

Configuring Your Machine > 32
Profile 
FEATUREOPTIONDESCRIPTION
Register/
Edit ProfileName
User defined Select profile number to register/edit.
Use the on-screen keyboard to enter 
the required profile name.
Protocol CIFS, FTP, HTTP Select required protocol.
Note: If CIFS is selected, Encode 
Communication defaults to None.
Target URL User defined Use the on-screen keyboard to enter 
the required target URL.
Port No. 00001 ~  00445 ~ 65535 Use the arrow  keys to select the 
desired port number.
Note :...

Configuring Your Machine > 33
Register/
Edit (cont.)
Doc. Type Doc. Type: 
Text, Text&Photo , Photo Allows you to specify the type of 
images on the document.
Removal for Background & 
Show-Through (sTHR): 
Auto , OFF, 1(Low), 2, 3, 4, 
5(High), sTHR Allows you to block out the color 
background of the image (assuming 
document has a color background) - 
such that the background color is not 
printed.
Use Show-Through when copying 
documents that are printed on both 
sides (for example newspaper). This...

Configuring Your Machine > 34
Register/
Edit (cont.)
Compression 
Rate Color:
High, Medium, 
Low
Mono (Grayscale):
High, Medium,  Low
Mono (Binary):
High (G4) , Medium (G3), Raw Select the appropriate compression 
level. Remember the higher the 
compression the bigger the file size!
Edge Erase OFF, ON Adjust the width  settings using the 
arrow buttons.
Input range:  05-50 mm
Erase Center OFF, ON Adjust the width  settings using the 
arrow buttons.
Input range:  01-50 mm
Contrast -3, -2, -1,  0, +1, +2,...

Configuring Your Machine > 35
View Information
FEATUREDESCRIPTION
Print Count Displays the print  count from all available trays.
Displays the number of color an d mono A4/letter impressions.
Scan Displays the number of pages  scanned from the flatbed and ADF.
Supplies Status Displays consumable status information.
System Displays system information:
1. Serial No.
2. Asset No.
3. Lot No.
4. CU Version
5. PU Version
6. SIP Version
7. Scanner Version
8. Total Memory
9. Flash Memory
Network Displays...

Configuring Your Machine > 36
Admin Setup
NOTE
The Admin Setup  option is blocked by a  password. Refer to “Pre-
configuration Information” on page 25.
FEATUREOPTIONDESCRIPTION
Copy Setup Default  SettingsDoc. Type Doc. Type:
Text, Text&Photo , 
Photo, Extra Fine Allows you to specify the type of 
images on the document.
Removal for 
Background & 
Show-Through 
(sTHR):  Auto, OFF, 
1(Low), 2, 3, 4, 
5(High), sTHR Allows you to block out the color 
background of the image 
(assuming document has a color...

Configuring Your Machine > 37
Copy Setup 
(cont.)
Default 
Settings 
(cont.) EdgeErase
OFF,  ON Adjust the width settings using the 
arrow buttons.
Input range: 05-50 mm
EraseCentr OFF,  ON Adjust the width settings using the 
arrow buttons.
Input range: 01-50 mm
DuplexCopy Copy Method: OFF, 1->2 sides, 
2->2 sides, 
2->1 side
Doc. Direction:
Binding
Right&Left , Top Allows you to define simplex or 
duplex and the binding orientation.
Mixed Size OFF, ON Allows you to load originals of 
same width but...

Configuring Your Machine > 38
Copy Setup 
(cont.)
Default 
Settings 
(cont.) Hue [R] -3, -2, -1, 
0, +1, 
+2, +3 [G] Adjust R/G balance settings.
[G]: Enhance green
[R]: Enhance red
Saturation [Low] -3, -2, -1,  0, 
+1, +2, +3 [High] Adjust saturation setting.
High: Enhance image sharpness
Low: Reduce hue
RGB [R] -3, -2,  -1, 0, +1, +2, +3
[G] -3, -2, 
-1,  0, +1, +2, +3
[B] -3, -2, 
-1,  0, +1, +2, +3 Adjust RGB contrast settings.
Fax Setup Default  SettingsDoc. Type
Normal, Fine, 
Ext-Fine, Photo,...

Configuring Your Machine > 39
Fax Setup 
(cont.)
Default 
Settings 
(cont/)MCF Report
OFF, ON If enabled, the result of the 
transmission will be printed out 
each time.
Memory Tx OFF,  ONThis sets the transmission mode to 
memory Tx (ON) or real-time Tx 
(OFF).
F-Code Box
F-Code Box  Register/Edit Secure Box Secure Box: received data cannot 
be printed without entering ID 
code (for secret documents). 
Use the numeric keypad to enter 
the sub-address and ID code (note 
enter a 4 digit ID code).
You can...

Configuring Your Machine > 40
Fax Setup 
(cont.)
Other 
Settings 
(cont.)Block Junk Fax Setting:
OFF, Mode1, Mode2, 
Mode3 Can prevent unnecessary fax 
reception.
Mode1: Reject fax from a number 
not registered in the Address 
Book.
Mode2: Reject fax from a number 
registered in the Reject List.
Mode3: Reject fax from a number 
not registered in the Address Book 
or registered in the Reject List.
Register/Edit Select a listin g and register or edit 
a number in the Reject list.
Note : enter the last...