OKI MB290 User Manual

MB290
- 21 -
Copy
Copy
Your machine has the function to make one or more 
copies.
You can also set up several parameters in order to make 
copies at your will.
Simple copy
In this case, the default parameters are applied.
1Place the document to be copied in the automatic 
document feeder, printed face on the top. 
or 
Place the document to be copied face down on the 
glass, respecting the indications around the glass.
2Press the   button twice. The copy is made 
using the default parameters.
ECO mode...

MB290
- 22 -
Copy
6Adjust the desired zoom level, from 25% TO 400%
with the buttons  or !, confirm with the OK
button (only available in 1 Page to 1 copy mode).
7Adjust the desired origin values with the digital 
keyboard buttons  or ! then confirm with the OK
button.
8Choose the resolution depending on the printing 
quality that you want AUTO, TEXT, QUALITY 
TEXT or PHOTO with the buttons  or !, then 
confirm with the OK button.
9Adjust the contrast level with the buttons  or !, 
then confirm with the...

MB290
- 23 -
Copy
3Confirm your choice by pressing the OK button.
4Quit this menu by pressing the   button.
Zoom setup
The ZOOM parameter allows you to reduce or enlarge an 
area of a document by choosing the origin and the zoom 
level to apply to the document, from 25 to 400 %.
! 842 - ADVANCED FCT/COPY/ZOOMING
1Press !, enter 842 using the keypad.
2Enter the desired zoom level with the 
alphanumerical keypad or choose among 
predefined values with the buttons  and !. 
3Confirm your choice by pressing...

MB290
- 24 -
Copy
Paper tray selection
The Automatic selection can have two meanings 
depending on the paper format defined on the paper 
trays. The following table describes the different cases.
! 852 - ADVANCED FCT/SCAN. & PRINT/TRAY 
PAPER
1Press !, enter 852 using the keypad.
2Select the default paper tray to use, AUTOMATIC
or MANUAL, with the buttons  and !.
3Confirm by pressing the OK button.
4Quit this menu by pressing the   button.
Sheet-feed analysis margins setup 
If you want to, you can offset...

MB290
- 25 -
Fax
Fax
This chapter describes all the fax processing and 
configuration functions.
You will also find a section describing fax mailboxes.
Fax transmission
Print a header page
A header page is stored in your terminal. To send your fax 
using this header page, you can print it at any time and fill 
in your details.
1Select 
!30 - FAX /HEADER PAGE.
2Select: 
301 - LOCAL, to print a header page according to 
the language configured on the terminal, 
302 - INTERNAT, to print a bilingual header...

MB290
- 26 -
Fax
Transmission with auto redial
This function allows you to monitor the dialling operation 
during a fax transmission. In this case, the maximum 
transmission rate will be 14400 bps.
This function allows for example:
• to hear if the subscriber’s fax is engaged and if so, 
choose the moment when the line is clear to start the 
document transmission.
• to control the communication progress in case of 
uncertain numbers, etc.
To take the line manually:
1Place the document in the fax feeder....

MB290
- 27 -
Fax
To activate relay from your fax machine:
1Insert the document to relay.
2Select 
!37 - FAX / BROADCAST.
3Enter the remote fax number where you will relay to 
or choose your dialling mode and press OK.
4Enter the relay list number used by the remote fax 
and press OK.
5You may enter the time you wish to transmit the 
document next to the current time and press OK.
6If you wish to modify the document feed type, 
select one of the options FEEDER or MEMORY, 
then press OK.
7If you wish, you...

MB290
- 28 -
Fax
Setting the re-direction contact
 !392 - FAX / REROUTING / CALL NUMBER
1Press !, enter 392 using the keypad.
2Using the keys ! and within the navigator, 
select the subscriber from the directory.
3Confirm with OK.
4Quit this menu by pressing the   button.
Printing rerouted documents
 !393 - FAX / REROUTING / COPY
1Press !, enter 393 using the keypad.
2Using the keys ! and within the navigator, 
select the COPY option (local printout of the 
information relayed to your device) either ON...

MB290
- 29 -
Fax
Consulting or modifying the waiting queue
! 62 - COMMANDS / MODIFY
1Press !, enter 62 using the keypad.
2In the waiting queue select the required document 
and confirm your choice with OK.
3You may now modify the parameters of the given 
document then confirm your modifications by 
pressing .
Deleting a transmission on hold
! 63 - COMMANDS / CANCEL
1Press !, enter 63 using the keypad.
2In the waiting queue select the desired document 
and confirm your choice with OK.
Printing a document...

MB290
- 30 -
Fax
Modifying the features of a MBX
! 71 - MAILBOXES / CREATE MBX
1Press !, enter 71 using the keypad.
2Select the desired MBX out of the 31 MBX’s, or 
enter the number of the MBX directly and 
press OK.
3Enter the code of this MBX, if there is one, and 
confirm with OK.
4Select the menu MAILBOX CODE or MAILBOX 
NAME, then confirm your choice with OK.
5Perform data modification of the menu and confirm 
with OK.
If needed, repeat the last two steps for the other menu.
Printing the contents of...