OKI C7350DTN User Manual
Here you can view all the pages of manual OKI C7350DTN User Manual. The Oki manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 541
C7350/7550 User’s Guide: Accessories • 541 To insert the memory modules into the slots: 4.Push out the white tabs at either end of the socket. 5.Lift out the board. ugc9_072.jpg 6.Align the module with the narrow strip (1) on its metallic contact edge to the right (toward the slot identifier numbers) of the control board. ugc7_123.jpg CAUTION! If you are installing three 256 MB modules (the maximum amount of memory), the memory modules that were originally installed must be removed. The...
Page 542
C7350/7550 User’s Guide: Accessories • 542 7.Carefully insert the module in the socket, placing the ends into the slot in the lock tabs. Press down firmly, until you feel the board engage the connector, then make sure the white tabs come up to lock the module in place. ugc9_073.jpg Downloaded From ManualsPrinter.com Manuals
Page 543
C7350/7550 User’s Guide: Accessories • 543 8.Replace the main board and secure it with the two screws. 9.Connect the printer interface cable and power cable. 10.Turn on the printer. NOTE SERVICE CALL/034 may appear on the printer’s display. If it does: 1. Turn off the printer. 2 Remove the main board. 3 Make sure the memory modules are correctly installed. 4 Replace the main board. 5 Turn on the printer. 6If SERVICE CALL/034 appears, repeat the above steps. Downloaded From ManualsPrinter.com...
Page 544
C7350/7550 User’s Guide: Accessories • 544 7.Print a MenuMap. To print the MenuMap: a.Press MENU twice. INFORMATION MENU displays. b.Press SELECT. PRINT MENU MAP displays. c.Press SELECT. The Menu Map prints. 8.Check the Total Memory Size (shown at the top of the MenuMap). It should match the memory now installed in the printer. If it doesn’t: a.Turn the printer off. b.Remove the main board. c.Make sure that all of the modules are firmly seated in their connectors. For Windows only: 9.In the...
Page 545
C7350/7550 User’s Guide: Accessories • 545 Hard Disk Drive The optional internal hard disk drive is used to store documents for: •proof and print •password or secure printing Installation 1.Turn off the printer. 2.Disconnect the power cable and printer interface cable. 3.Loosen the two screws (1) and remove the main board. mother board remove.eps Downloaded From ManualsPrinter.com Manuals
Page 546
C7350/7550 User’s Guide: Accessories • 546 4.Hold the hard disk drive by the locking handle (1). 5.Insert the handle locating lugs (2) and four locating feet (3) into the holes in the main board making sure the hard disk connector (4) starts to engage with the socket on the control board. 6.Gently push down on the locking handle (1) making sure the hard disk moves forward and fully engages with the socket. hard disk install.eps 7.Replace the main board and secure it with the two screws....
Page 547
C7350/7550 User’s Guide: Accessories • 547 10.Print a MenuMap. To print the MenuMap: a.Press MENU twice. INFORMATION MENU displays. b.Press SELECT. PRINT MENU MAP displays. c.Press SELECT. The Menu Map prints. 11.Check that the HDD appears at the top of the MenuMap. If it doesn’t, a.Turn the printer off b.Remove the main board c.Reseat the hard disk drive. d.Turn on the printer e.Print the MenuMap. 12.After installing the hard disk drive, the printer automatically initializes to include the...
Page 548
C7350/7550 User’s Guide: Accessories • 548 Hard Disk Drive Initialize Automatically After the hard disk drive is installed, the printer automatically initializes (configures) to include this option. You can also manually initialize the HDD. Initialize Manually 1.Press MENU until DISK MAINTENANCE displays. 2.Press SELECT. 3.Press ITEM (either + or –) until HDD INITIALIZE displays. 4.Press the SELECT button. 5.Press the ITEM button to shut down the printer. 6.Turn on the printer. The printer...
Page 549
C7350/7550 User’s Guide: Accessories • 549 Duplex Unit Installation 1.Turn off the printer. 2. Disconnect the power cable. duplex install.eps 3.Open the front cover (1). 4.Insert the duplex unit (2) into the printer. Engage the sides of the duplex unit in the slots in the printer. 5.Gently slide the duplex unit (2) fully into the printer. 6.Close the front cover (1). 7.Connect the power cable 8.Turn on the printer. 9.The printer automatically configures to include this option. For Windows only:...
Page 550
C7350/7550 User’s Guide: Accessories • 550 Paper Trays Two additional paper trays can be installed. When combined with the standard paper tray, paper capacity increases to approximately 1590 sheets. Installation 1.Turn off the printer. 2.Disconnect the power cable and printer interface cable. WARNING! The printer weighs 106 lbs. (48 kg). 2 people are required to lift the printer safely and prevent any personal injury. NOTE If installing both additional paper trays: Put the two additional paper...