OKI C5900N User Manual
Have a look at the manual OKI C5900N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Menu functions> 121 MONO-PRINT SPEEDAUTO SPEED MONO 32PPM COLOR SPEED MIXED SPEEDIf the first page of a print job is black and white, the printer runs at 32ppm (pages per minute). When a colour page is detected the printer slows down to 20ppm (C5700) or 26ppm (C5900) for the rest of that job. This setting operates in the same way as AUTO SPEED, except that the printer runs at 32ppm until a colour page is detected. To achieve this speed the printer requires an additional 10 – 20 seconds to warm up and 30 –60 seconds to cool down when switching to 20ppm (C5700) or 26ppm (C5900) for colour pages. This setting is therefore most appropriate when the majority of print jobs are entirely black and white. The printer runs at 20 ppm (C5700), 26ppm ((C5900)for all print jobs. This setting is most appropriate when the majority of print jobs are in colour. The printer automatically switches between 20 ppm (C5700), 26ppm (C5900) for each colour page and 20ppm for each black and white page. When black and white pages are printed, the 3 colour drums are automatically lifted to maximize their working life. This operation imposes delay each time the printer switches between colour and black and white printing. However, the 30 –60 second cool down delay described for MONO 32ppm is avoided by limiting mono speed to 20ppm. This setting may be preferred for mostly black and white printing with some colour pages, or where most print jobs are entirely colour or entirely black and white. ITEMSETTINGSEXPLANATION Downloaded From ManualsPrinter.com Manuals
Menu functions> 122 ORIENTATIONPORTRAIT LANDSCAPESelects default page orientation between portrait (tall) and landscape (wide). LINES PER PAGE5-64-128Sets the number of lines of text per page when raw text is received from systems other than Windows. The default for A4 portrait is 65, and for Letter is 60. EDIT SIZECASSETTE SIZE LETTER EXECUTIVE LEGAL14 LEGAL13.5 LEGAL13 A4 / A5 / A6 / B5 CUSTOM COM-9 ENVELOPE COM-10 ENVELOPE MONARCH ENV DL ENVELOPE C5 ENVELOPESets the size of the printable page area to match the size of paper in use. This is not the same as the physical paper size, which is always slightly larger. For dimensions of physical page sizes, see “Paper Recommendations” section in this guide. ITEMSETTINGSEXPLANATION Downloaded From ManualsPrinter.com Manuals
Menu functions> 123 MEDIA MENU This menu provides adjustment to suit a wide range of print media. ITEMSETTINGSEXPLANATION TRAY1 PAPERSIZEA4 / A5 / A6 / B5 LEGAL14 LEGAL13.5 LEGAL13 LETTER EXECUTIVE CUSTOMSelects the size of paper loaded in Tray 1 (upper tray if both trays installed). For CUSTOM setting see X-DIMENSION and Y-DIMENSION later in this table. TRAY1 MEDIATYPEPLAIN LETTERHEAD BOND RECYCLED ROUGH GLOSSYSelects the type of media loaded in this tray. This will help the printer to adjust its internal operating parameters, such as engine speed and fusing temperature, to better accommodate the media to be fed. For example, letterhead may benefit from a slightly lower fusing temperature to ensure that its ink does not offset. TRAY1 MEDIAWEIGHT LIGHT (64~74g/m²) MEDIUM (75~90g/m²) HEAVY (91~105g/m²) Adjusts the printer for the weight of paper stock loaded in thus tray. TRAY2 PAPERSIZEA4 / A5 / B5 / LEGAL14 LEGAL13.5 LEGAL13 LETTER EXECUTIVE CUSTOMSelects the size of paper loaded in Tray 2 (lower) if installed. For CUSTOM setting see X-DIMENSION and Y-DIMENSION later in this table. TRAY2 MEDIATYPEPLAIN LETTERHEAD BOND RECYCLED ROUGHSelects the type of media loaded in this tray (if installed). Downloaded From ManualsPrinter.com Manuals
Menu functions> 124 TRAY2 MEDIAWEIGHTLIGHT (64- 74g/m²) MEDIUM (75- 90g/m²) HEAVY (91- 176g/m²)Adjusts the printer for the weight of paper stock loaded in this tray (if installed). MPT PAPERSIZE LETTER EXECUTIVE LEGAL14 LEGAL13.5 LEGAL13 A4 / A5 / A6 / B5 CUSTOM COM-9 ENVELOPE COM-10 ENVELOPE MONARCH ENV DL ENVELOPE C5 ENVELOPE Selects the size of paper to be fed from the multi purpose tray. For CUSTOM setting see X-DIMENSION and Y-DIMENSION later in this table. MPT MEDIATYPEPLAIN LETTERHEAD TRANSPARENCY LABELS BOND RECYCLED CARD STOCK ROUGH GLOSSYSelects the type of media to be fed from the multi purpose tray so that the printer can adjust its internal parameters to be tter accommodate the selected type of media. MPT MEDIAWEIGHT MEDIUM (75- 90g/m²) HEAVY (91- 120g/m²) ULTRA HEAVY (121-203g/m²)Selects the media we ight to be fed from the multi purpose tray. UNIT OF MEASUREMILLIMETRE INCHSelects the unit of measure for the next two items. X-DIMENSION 100- 210-216 MILLIMETRE Selects the width of paper defined by the “CUSTOM” settings referred to in the foregoing PAPER SIZE settings. ITEMSETTINGSEXPLANATION Downloaded From ManualsPrinter.com Manuals
Menu functions> 125 Y- D I M E N S I O N148-297-1200 MILLIMETRESelects the length of paper defined by the “Custom” settings referred to in the foregoing PAPER SIZE settings. Note that media of up to 1200mm in length can be fed from the multi purpose tray for banner printing. ITEMSETTINGSEXPLANATION Downloaded From ManualsPrinter.com Manuals
Menu functions> 126 COLOUR MENU The printer automatically adjusts colour balance and density at appropriate intervals, optimising the printed output for bright white paper viewed in natural daylight conditions. The items on this menu provide a means of changing the default settings for special or particularly difficult print jobs. Settings revert to their default values when the next print job is complete. ITEMSETTINGSEXPLANATION DENSITY CONTROLAUTO MANUALIf set to AUTO, image density will be automatically adjusted at power on, when a new image drum or toner cartridge is installed, and at intervals of 100, 300 and 500 drum counts. If a 500 drum count interval occurs during a print job it will occur at the end of that job, and will take up to 55 seconds. If set to manual, this adjustment will only be performed when initiated by the next menu item. AUTO DENSITYEXECUTESelecting this will perform the auto density set up immediately. COLOUR TUNINGPRINT PATTERN Selecting this item prints the colour tuning pattern to help you adjust the colour balance. C HIGHLIGHT C MID-TONE C DARK M HIGHLIGHT M MID-TONE M DARK Y HIGHLIGHT Y MID-TONE Y DARK K HIGHLIGHT K MID-TONE K DARK-3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3 Adjusts image density for each colour component (cyan, magenta, yellow and black). Normal setting is 0. Downloaded From ManualsPrinter.com Manuals
Menu functions> 127 C DARKNESS M DARKNESS Y DARKNESS K DARKNESS-3~0~+3 -3~0~+3 -3~0~+3 -3~0~+3Adjusts darkness of each colour component (cyan, magenta, yellow and black). Normal setting is 0. AJST REGISTRATIONEXECUTEPerforms automatic colour registration adjustment. Normally this is done on power on and when the top cover is opened and then closed. This process accurately aligns the cyan, magenta and yellow images to the black image. C REG FINE AJST M REG FINE AJST Y REG FINE AJST-3~0~+3 -3~0~+3 -3~0~+3Performs fine adjustment of image timing in relation to the black image component. INK SIMULATIONOFF SWOP EUROSCALE JAPANSelects from a range of industry standard colour swatches. UCRLOW MEDIUM HIGH CMY 100% DENSITYDISABLE ENABLEWhen enabled, black areas are produced using 100% C, M, and Y instead of black. This results in a glossier finish. ITEMSETTINGSEXPLANATION Downloaded From ManualsPrinter.com Manuals
Menu functions> 128 SYSTEM CONFIGURATION MENU This menu adjusts general printer settings to suit the way you prefer to work. ITEMSSETTINGSEXPLANATION POW SAVE TIME 5 15 30 60 240Adjusts the idling time before the printer automatically switches into power saving mode. In this mode power consumption is reduced to a low level required to just keep the printer operating and ready to receive data. When a job is sent the printer will require a warm-up time o f u p t o 1 m i n u t e b e f o r e p r i n t i n g c a n begin. PERSONALITYAUTO PCL IBM PPR III XL EPSON FX PS3 EMULATIONThis item selects which industry standard emulation your printer should use. When set to AUTO, incoming data is examined and the correct emulation is automatically selected each time a print job is received. USB PS PROTOCOLRAW ASCIISelects PostScript data format for USB port. NET PS PROTOCOLRAW ASCIISelects PostScript data format for network port. CLRABLE WARNINGON JOBWhen ON, non-critical warnings, such as requests for a different paper size, can be cleared by pressing the ON LINE button. When set to JOB, they are cleared when the print job resumes. AUTO CONTINUEON OFFDetermines whether or not the printer will automatically recover from a memory overflow condition. MANUAL TIMEOUTOFF 30 60Specifies how many seconds the printer will wait for paper to be fed before cancelling the job. WAIT TIMEOUT5~40~300Specifies how many seconds the printer will wait when received data pauses before forcing a page eject. In PostScript Emulation mode the job will be cancelled if timeout occurs. Downloaded From ManualsPrinter.com Manuals
Menu functions> 129 LOW TONERCONTINUE STOPSpecifies whether the printer should continue printing even after a low toner condition is detected. JAM RECOVERYON OFFSpecifies whether the printer should perform jam recovery after a paper jam has occurred. If ON, the printer will attempt to print again any pages lost due to a paper jam once the jam has been cleared. ERROR REPORT ON OFFIf ON, the printer will print error details when a PostScript Emulation error occurs. ITEMSSETTINGSEXPLANATION Downloaded From ManualsPrinter.com Manuals
Menu functions> 130 PCL EMULATION This menu controls settings effective when the printer is operating in PCL emulation mode. ITEMSETTINGSEXPLANATION FONT SOURCERESIDENT / DIMM0 / DIMM1 / DOWNLOADEDSpecifies the location of the PCL default font. Normally this will be INTERNAL unless additional fonts are installed in the expansion ROM slot or additional fonts have been downloaded to RAM as permanent fonts. FONT No.I0/ C001 / S001Sets the current default font number from the currently selected source, which could be internal (I), ROM slot (C) or downloaded (S). FONT HEIGHT 4.00 POINT~12.00 POINT~999.75 POINTPoint size of selected default font. SYMBOL SETPC-8 PCL symbol set. If the font source and number are changed to one which does not support the selected symbol set, this must be changed to an available symbol set for that font. A4 PRINT WIDTH78 COLUMN 80 COLUMNSets the number of columns subject to Auto LF with A4 paper in PCL. This is the value when Auto CR/LF Mode is set to OFF with the 10CPI character. WHITE PAGE SKIPOFF / ONSelects whether blank pages are printed or not. CR FUNCTIONCR / CR+LF Selects whether a received carriage return character (0Dh) also causes a line feed. LF FUNCTIONLF / LF+CRSelects whether a received line feed character (0Ah) also causes a carriage return. PRINT MARGINNORMAL 1/5 INCH 1/6 INCHSets the non-printable page area. NORMAL is PCL compatible. Downloaded From ManualsPrinter.com Manuals