OKI C5900N User Manual
Here you can view all the pages of manual OKI C5900N User Manual. The Oki manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 131
Menu functions> 131 TRUE BLACKOFF / ONSelects whether black image data is printed using black toner (ON) or 100% CMY (OFF). (Valid in PCL emulation mode only.) PEN WIDTH ADJUST Tr a y I D # MP TRAY4 ITEMSETTINGSEXPLANATION Downloaded From ManualsPrinter.com Manuals
Page 132
Menu functions> 132 PPR EMULATION This menu controls settings effective when the printer is operating in PPR emulation mode. ITEMSETTINGSEXPLANATION CHARACTER PITCH10 CPI; 12 CPI; 17 CPI; 20 CPI; PROPORTIONALSpecifies character pitch in IBM PPR emulation. FONT CONDENSE12CPI - 20CPI; 12CPI - 12CPISpecifies 12CPI pitch for Condense Mode. CHARACTER SETSet 1; Set 2Specifies a character set. SYMBOL SETIBM 437Specifies a symbol set. LETTER 0 STYLEDisable; Enable Specifies the style that replaces 9BH...
Page 133
Menu functions> 133 TEXT HEIGHTSame; DiffSets the height of a character. SAME: Regardless of CPI, same height DIFF: As CPI, character heights vary. ITEMSETTINGSEXPLANATION Downloaded From ManualsPrinter.com Manuals
Page 134
Menu functions> 134 FX EMULATION This menu controls settings effective when the printer is operating in FX emulation mode. ITEMSETTINGSEXPLANATION CHARACTER PITCH10 CPI; 12 CPI; 17 CPI; 20 CPI; PROPORTIONALSpecifies character pitch in this emulation. CHARACTER SETSet 1; Set 2Specifies a character set. SYMBOL SET IBM 437 Specifies a symbol set. LETTER 0 STYLEDisable; EnableSpecifies the style that replaces 9BH with letter o and 9DH with a zero ZERO CHARACTERNormal; Slashed Sets the zero to be...
Page 135
Menu functions> 135 USB MENU This menu controls the operation of the printer’s USB data interface. NETWORK MENU This menu controls the operation of the printer’s 10Base-T/ 100Base-TX network interface. ITEMSETTINGSEXPLANATION SOFT RESET ENABLE / DISABLEEnables or disables the SOFT RESET command. SERIAL NUMBERENABLE / DISABLE OFFLINE RECEIVEENABLE / DISABLE SPEED12 / 480 MpsSelects the interface speed ITEMSETTINGSEXPLANATION TCP/IPENABLE / DISABLEEnables or disables this network protocol. IP...
Page 136
Menu functions> 136 MAINTENANCE MENU This menu provides access to various printer maintenance functions. SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. To change, proceed as above. GATEWAY ADDRESSxxx.xxx.xxx.xxxCurrent assigned gateway address. To change, proceed as above. FAC TO RY DEFAULTSEXECUTE Reloads the settings present when the unit was setup by the manufacturer. WEBENABLE / DISABLEEnables or disables Web config. facility. TELNET ENABLE / DISABLEEnables or disables Telnet...
Page 137
Menu functions> 137 USAGE MENU This menu is for information only, and provides an indication of total usage of the printer and the expected life left in its consumable items. This is particularly useful if you do not have a full set of replacement consumables to hand and you need to know how soon you will need them. PAPER BLACK SETTING–2~0~+2Used for small adjustment when you experience faded print or light specks / streaking in monochrome printing on white paper. Select a higher value to reduce...
Page 138
Menu functions> 138 JOB LOG MENU K TONER C TONER M TONER Y TONER Cartridge size and current toner level. ITEMSETTINGEXPLANATION JOB LOG ENABLE/ DISABLEPrints a list of jobs carried out on this printer. ITEMEXPLANATION Downloaded From ManualsPrinter.com Manuals
Page 139
Overlays and Macros (Windows only)> 139 OVERLAYS AND MACROS (WINDOWS ONLY) WHAT ARE OVERLAYS AND MACROS? If you would like to print on special stationery, such as forms and letterhead, but do not want to use pre-printed stationery, you can create your own using these advanced features. You can use PostScript overlays to generate all your special stationery and store it in the printer for use whenever you need it. If you have chosen to install the PCL driver, macros perform a similar function. You...
Page 140
Overlays and Macros (Windows only)> 140 CREATING POSTSCRIPT OVERLAYS Three steps are required to create an overlay: 1.Create the form data using your own application software and print it to a printer (.PRN) file. 2.Use the Storage Device Manager utility software supplied on CD with your printer to create a “project file,” import the.PRN file(s), and download the generated filter (.HST) file to the printer. The project file will contain one or more overlay images which are functionally related, such...