OKI C5900CDTN User Manual

							Menu functions> 121
MONO-PRINT 
SPEEDAUTO SPEED
MONO 32PPM
COLOR SPEED 
MIXED SPEEDIf the first page of a print job is black 
and white, the printer runs at 32ppm 
(pages per minute). When a colour 
page is detected the printer slows 
down to 20ppm (C5700) or 26ppm 
(C5900) for the rest of that job.
This setting operates in the same 
way as AUTO SPEED, except that the 
printer runs at 32ppm until a colour 
page is detected. To achieve this 
speed the printer requires an 
additional 10 – 20 seconds to warm 
up and 30 –60 seconds to cool down 
when switching to 20ppm (C5700) or 
26ppm (C5900) for colour pages. 
This setting is therefore most 
appropriate when the majority of 
print jobs are entirely black and 
white.
The printer runs at 20 ppm (C5700), 
26ppm ((C5900)for all print jobs. 
This setting is most appropriate 
when the majority of print jobs are 
in colour.
The printer automatically switches 
between 20 ppm (C5700), 26ppm 
(C5900) for each colour page and 
20ppm for each black and white 
page. When black and white pages 
are printed, the 3 colour drums are 
automatically lifted to maximize 
their working life. This operation 
imposes delay each time the printer 
switches between colour and black 
and white printing. However, the 30 
–60 second cool down delay 
described for MONO 32ppm is 
avoided by limiting mono speed to 
20ppm. This setting may be 
preferred for mostly black and white 
printing with some colour pages, or 
where most print jobs are entirely 
colour or entirely black and white.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 122
ORIENTATIONPORTRAIT
LANDSCAPESelects default page orientation 
between portrait (tall) and landscape 
(wide).
LINES PER PAGE5-64-128Sets the number of lines of text per 
page when raw text is received from 
systems other than Windows. The 
default for A4 portrait is 65, and for 
Letter is 60.
EDIT SIZECASSETTE 
SIZE
LETTER
EXECUTIVE
LEGAL14
LEGAL13.5
LEGAL13
A4 / A5 / A6 / 
B5
CUSTOM
COM-9 
ENVELOPE
COM-10 
ENVELOPE
MONARCH ENV
DL ENVELOPE
C5 ENVELOPESets the size of the printable page 
area to match the size of paper in 
use. This is not the same as the 
physical paper size, which is always 
slightly larger. For dimensions of 
physical page sizes, see “Paper 
Recommendations” section in this 
guide.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 123
MEDIA MENU
This menu provides adjustment to suit a wide range of print 
media.
ITEMSETTINGSEXPLANATION
TRAY1 
PAPERSIZEA4 / A5 / A6 / 
B5
LEGAL14
LEGAL13.5
LEGAL13
LETTER
EXECUTIVE
CUSTOMSelects the size of paper loaded in 
Tray 1 (upper tray if both trays 
installed). For CUSTOM setting see 
X-DIMENSION and Y-DIMENSION 
later in this table.
TRAY1 
MEDIATYPEPLAIN
LETTERHEAD
BOND
RECYCLED
ROUGH
GLOSSYSelects the type of media loaded in 
this tray. This will help the printer to 
adjust its internal operating 
parameters, such as engine speed 
and fusing temperature, to better 
accommodate the media to be fed. 
For example, letterhead may benefit 
from a slightly lower fusing 
temperature to ensure that its ink 
does not offset.
TRAY1 
MEDIAWEIGHT
LIGHT 
(64~74g/m²)
MEDIUM 
(75~90g/m²)
HEAVY 
(91~105g/m²)
Adjusts the printer for the weight of 
paper stock loaded in thus tray.
TRAY2 
PAPERSIZEA4 / A5 / B5 / 
LEGAL14
LEGAL13.5
LEGAL13
LETTER
EXECUTIVE
CUSTOMSelects the size of paper loaded in 
Tray 2 (lower) if installed. For 
CUSTOM setting see X-DIMENSION 
and Y-DIMENSION later in this table.
TRAY2 
MEDIATYPEPLAIN
LETTERHEAD
BOND
RECYCLED
ROUGHSelects the type of media loaded in 
this tray (if installed).
Downloaded From ManualsPrinter.com Manuals 
						

							
Menu functions> 124
TRAY2 
MEDIAWEIGHTLIGHT (64-
74g/m²)
MEDIUM (75-
90g/m²)
HEAVY (91-
176g/m²)Adjusts the printer for the weight of 
paper stock loaded in this tray (if 
installed).
MPT PAPERSIZE LETTER EXECUTIVE
LEGAL14
LEGAL13.5
LEGAL13
A4 / A5 / A6 / 
B5
CUSTOM
COM-9 
ENVELOPE
COM-10 
ENVELOPE
MONARCH ENV
DL ENVELOPE
C5 ENVELOPE Selects the size of
 paper to be fed 
from the multi purpose tray. For 
CUSTOM setting see X-DIMENSION 
and Y-DIMENSION later in this table.
MPT MEDIATYPEPLAIN
LETTERHEAD
TRANSPARENCY
LABELS
BOND
RECYCLED
CARD STOCK
ROUGH
GLOSSYSelects the type of  media to be fed 
from the multi purpose tray so that 
the printer can adjust its internal 
parameters to be tter accommodate 
the selected type of media.
MPT 
MEDIAWEIGHT MEDIUM (75-
90g/m²)
HEAVY (91-
120g/m²)
ULTRA HEAVY 
(121-203g/m²)Selects the media we
ight to be fed 
from the multi purpose tray.
UNIT OF 
MEASUREMILLIMETRE
INCHSelects the unit of measure for the 
next two items.
X-DIMENSION 100- 210-216 
MILLIMETRE Selects the width of
 paper defined by 
the “CUSTOM” settings referred to in 
the foregoing PAPER SIZE settings.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 125
Y- D I M E N S I O N148-297-1200 
MILLIMETRESelects the length of paper defined 
by the “Custom” settings referred to 
in the foregoing PAPER SIZE 
settings. Note that media of up to 
1200mm in length can be fed from 
the multi purpose tray for banner 
printing.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 126
COLOUR MENU
The printer automatically adjusts colour balance and density at 
appropriate intervals, optimising the printed output for bright 
white paper viewed in natural daylight conditions. The items on 
this menu provide a means of changing the default settings for 
special or particularly difficult print jobs. Settings revert to their 
default values when the next print job is complete.
ITEMSETTINGSEXPLANATION
DENSITY 
CONTROLAUTO
MANUALIf set to AUTO, image density will be 
automatically adjusted at power on, 
when a new image drum or toner 
cartridge is installed, and at intervals 
of 100, 300 and 500 drum counts. If 
a 500 drum count interval occurs 
during a print job it will occur at the 
end of that job, and will take up to 
55 seconds. If set to manual, this 
adjustment will only be performed 
when initiated by the next menu 
item.
AUTO DENSITYEXECUTESelecting this will perform the auto 
density set up immediately.
COLOUR 
TUNINGPRINT PATTERN Selecting this item prints the colour 
tuning pattern to help you adjust the 
colour balance.
C HIGHLIGHT
C MID-TONE
C DARK
M HIGHLIGHT
M MID-TONE
M DARK
Y HIGHLIGHT
Y MID-TONE
Y DARK
K HIGHLIGHT
K MID-TONE
K DARK-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
Adjusts image density for each 
colour component (cyan, magenta, 
yellow and black). Normal setting is 
0.
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 127
C DARKNESS
M DARKNESS
Y DARKNESS
K DARKNESS-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3Adjusts darkness of each colour 
component (cyan, magenta, yellow 
and black). Normal setting is 0.
AJST 
REGISTRATIONEXECUTEPerforms automatic colour 
registration adjustment. Normally 
this is done on power on and when 
the top cover is opened and then 
closed. This process accurately 
aligns the cyan, magenta and yellow 
images to the black image.
C REG FINE 
AJST
M REG FINE 
AJST
Y REG FINE 
AJST-3~0~+3
-3~0~+3
-3~0~+3Performs fine adjustment of image 
timing in relation to the black image 
component.
INK 
SIMULATIONOFF
SWOP
EUROSCALE
JAPANSelects from a range of industry 
standard colour swatches.
UCRLOW
MEDIUM
HIGH
CMY 100% 
DENSITYDISABLE
ENABLEWhen enabled, black areas are 
produced using 100% C, M, and Y 
instead of black. This results in a 
glossier finish.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 128
SYSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you 
prefer to work.
ITEMSSETTINGSEXPLANATION
POW SAVE TIME 5
15
30
60
240Adjusts the idling time before the 
printer automatically switches into 
power saving mode. In this mode 
power consumption is reduced to a 
low level required to just keep the 
printer operating and ready to 
receive data. When a job is sent the 
printer will require a warm-up time 
o f  u p  t o  1  m i n u t e  b e f o r e  p r i n t i n g  c a n  
begin.
PERSONALITYAUTO
PCL
IBM PPR III XL
EPSON FX
PS3 
EMULATIONThis item selects which industry 
standard emulation your printer 
should use. When set to AUTO, 
incoming data is examined and the 
correct emulation is automatically 
selected each time a print job is 
received.
USB PS 
PROTOCOLRAW
ASCIISelects PostScript data format for 
USB port.
NET PS 
PROTOCOLRAW
ASCIISelects PostScript data format for 
network port.
CLRABLE 
WARNINGON
JOBWhen ON, non-critical warnings, 
such as requests for a different 
paper size, can be cleared by 
pressing the 
ON LINE button. 
When set to JOB, they are cleared 
when the print job resumes.
AUTO 
CONTINUEON
OFFDetermines whether or not the 
printer will automatically recover 
from a memory overflow condition.
MANUAL 
TIMEOUTOFF
30
60Specifies how many seconds the 
printer will wait for paper to be fed 
before cancelling the job.
WAIT TIMEOUT5~40~300Specifies how many seconds the 
printer will wait when received data 
pauses before forcing a page eject. 
In PostScript Emulation mode the 
job will be cancelled if timeout 
occurs.
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 129
LOW TONERCONTINUE
STOPSpecifies whether the printer should 
continue printing even after a low 
toner condition is detected.
JAM RECOVERYON
OFFSpecifies whether the printer should 
perform jam recovery after a paper 
jam has occurred. If ON, the printer 
will attempt to print again any pages 
lost due to a paper jam once the jam 
has been cleared.
ERROR REPORT ON
OFFIf ON, the printer will print error 
details when a PostScript Emulation 
error occurs.
ITEMSSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 130
PCL EMULATION
This menu controls settings effective when the printer is 
operating in PCL emulation mode.
ITEMSETTINGSEXPLANATION
FONT 
SOURCERESIDENT / 
DIMM0 / DIMM1 / 
DOWNLOADEDSpecifies the location of the PCL 
default font. Normally this will be 
INTERNAL unless additional fonts 
are installed in the expansion ROM 
slot or additional fonts have been 
downloaded to RAM as permanent 
fonts.
FONT No.I0/ C001 / S001Sets the current default font 
number from the currently 
selected source, which could be 
internal (I), ROM slot (C) or 
downloaded (S).
FONT HEIGHT 4.00 POINT~12.00 
POINT~999.75 
POINTPoint size of selected default font.
SYMBOL SETPC-8 PCL symbol set. If the font source 
and number are changed to one 
which does not support the 
selected symbol set, this must be 
changed to an available symbol set 
for that font.
A4 PRINT 
WIDTH78 COLUMN
80 COLUMNSets the number of columns 
subject to Auto LF with A4 paper in 
PCL. This is the value when Auto 
CR/LF Mode is set to OFF with the 
10CPI character.
WHITE PAGE 
SKIPOFF / ONSelects whether blank pages are 
printed or not.
CR FUNCTIONCR / CR+LF Selects whether a received 
carriage return character (0Dh) 
also causes a line feed.
LF FUNCTIONLF / LF+CRSelects whether a received line 
feed character (0Ah) also causes a 
carriage return.
PRINT 
MARGINNORMAL
1/5 INCH
1/6 INCHSets the non-printable page area. 
NORMAL is PCL compatible.
Downloaded From ManualsPrinter.com Manuals