OKI C5900CDTN User Manual

							Colour matching> 111
4.From the [Pages per Sheet] menu (3), select the number 
of pages you want to fit onto a single sheet of paper.
5.If required, change the direction (4) the document pages 
are laid out on each sheet of paper.
MACOS X
1.In your application program, choose [File] → [Print].
2.From the [Printer] menu (1), select your printer model.
3.Select [Layout] (2).
4.From the [Pages per Sheet] menu (3), select the number 
of pages you want to fit onto a single sheet of paper.
5.If required, change the direction (4) the document pages 
are laid out on each sheet of paper.
6.If required, you can surround each page with a border (5).
1
2
4
5
3
Downloaded From ManualsPrinter.com Manuals 
						

							Colour matching> 112
POSTER PRINTING
This option allows you to print posters by dividing a single 
document page into multiple pieces (sometimes called “tiles”). 
Each piece prints, enlarged, on a separate sheet. Then, you 
combine the separate sheets to create a poster.
Poster Print is only available with the Windows PCL printer 
drivers.
WINDOWS PCL
1.In the driver’s Setup tab, under [Finishing Mode], choose 
[Poster Print].
2.Click [Options] to open the Options window.
(a)Choose the [enlargement] required for your 
document to fill the poster.
(b)[Registration marks] can be printed if required so 
that your printed pages (tiles) can be trimmed 
exactly to the edge of the image.
(c)An [overlap] may help you to match adjacent tiles 
when making up your final poster.
Downloaded From ManualsPrinter.com Manuals 
						

							
Colour matching> 113
SCALE TO PAGE
Scale to Page allows you to print data formatted for one size page 
onto a different size page, without modifying the print data.
This feature is only available with the Windows PCL drivers.
1.In the driver’s Setup tab, click the [Options] button.
2. Check the [Fit to Page] checkbox.
3. Choose the scaling factor you need from the 
[Conversions] drop-down list.
Downloaded From ManualsPrinter.com Manuals 
						

							Colour matching> 114
WATERMARKS
A watermark is typically faint text that is superimposed on a 
printed document. This can used to indicate that the document is 
“Draft”, or perhaps “Confidential”.
This feature is not available on Mac OS X. The illustration below 
shows the Windows PostScript driver. The PCL driver is very 
similar.
WINDOWS
The Watermarks Feature is found in the driver’s [Job Options] 
tab. Click the [Watermarks] button.
Downloaded From ManualsPrinter.com Manuals 
						

							Colour matching> 115
To create a new watermark
1.In the Watermarks window, click [New…].
2.Enter the text you want for your watermark.
3.Adjust your watermark’s font, size, colour, angle, position 
and border (trim) as required.
4.Click [OK] to accept your changes.
To choose a previously created watermark
1.In the Watermarks window, click the watermark in the list.
To edit an existing watermark
1.In the Watermarks window, click the watermark’s name in 
the list.
2.Click [Edit…].
3.Make any adjustments you wish, and click [OK] to accept 
your changes.
To print using a watermark
1.In the Watermarks window, click the watermark’s name in 
the list.
2.Click [OK] to close the Watermarks window.
3.Click [OK] to close the Printer Properties window.
4.Print your document.
Downloaded From ManualsPrinter.com Manuals 
						

							Colour matching> 116
MACOS 9
The illustrations here are for the Adobe PostScript driver. 
Watermarks are not featured in the Apple LaserWriter driver.
1.In your application program, choose [File] → [Page 
Setup].
2.Select [Watermarks] (1).
3.Select which pages you want to print watermarks on (2).
[None] (no watermarks), [First] or [All].
4.Choose the type of watermark data to use (3): a PICT file, 
EPS file or plain text.
5.To create or edit the text for a watermark, click [Edit…] 
(4). This launches the watermark editing dialogue (5).
1
2
4
5
3
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 117
MENU FUNCTIONS
This sections lists the menus accessed via the controls on the 
printer’s operator panel and displayed in the LCD window.
It should be noted that many of these settings can be, and often 
are, overridden by settings in the Windows printer drivers. 
However, several of the driver settings can be left at “Printer 
Setting”, which will then default to the settings entered in these 
printer menus.
Factory default settings are shown in bold type in the following 
tables.
In the normal operating condition, known as “standby,” the 
printer’s LCD window will show “ONLINE.” In this condition, to 
enter the menu system, press the +/– keys on the operator panel 
to move up and down through the list of menus until the menu 
you wish to view is displayed. Then proceed as follows:
1.Press ENTER to enter the menu.
2.Use the +/– keys to move up and down through the items 
in the menu. When the item you want to change is 
displayed, press ENTER to edit that item. An asterisk (*) 
appears next to the setting currently in effect.
3.Use the +/– keys to move up and down through the 
available settings for this item, and press ENTER when 
the setting you want is displayed. An asterisk (*) will 
appear next to the setting, indicating that this setting is 
now in effect.
4.Press BACK to move back to the list of menu items.
5.Do one of the following:
• Press BACK again to move up to the list of menus;
or…
• Press ON LINE to exit from the menu system and 
return to standby.
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 118
PRINT JOBS MENU
This menu only appears when the hard disk drive is installed. It 
is used for printing of documents stored on the internal hard disk. 
These will be stored using either the secure printing feature or 
the proof and print feature. Please refer to these features 
elsewhere in this manual for instructions on how to use.
You will be prompted for your password or personal identification 
number (PIN). The +/– keys are used to enter each digit and the 
ENTER key to advance from one digit to the next.
INFORMATION MENU
This menu provides a quick method of listing various items stored 
within the printer.
ITEMACTIONEXPLANATION
PRINT MENU 
MAPEXECUTE Prints complete menu listing with current 
settings shown.
NETWORKEXECUTEPrints Network configuration information.
PRINT FILE 
LISTEXECUTE Prints a list of overlays, macros, fonts and 
other files stored on the printer’s hard disk 
drive (if installed).
PRINT PCL 
FONTEXECUTEPrints complete list of all internal PCL fonts 
plus those stored in ROM (slot 0), flash 
memory and in hard disk (if installed).
PRINT PSE 
FONTEXECUTE Prints complete list of all internal PostScript 
emulation fonts.
PRINT PPR 
FONTEXECUTEPrints complete list of all internal IBM 
ProPrinter III XL emulation fonts, including 
any downloaded to flash memory or hard 
disk.
PRINT FX FONT EXECUTE Prints complete list of all internal Epson FX 
emulation fonts, including any downloaded 
to flash memory or hard disk.
DEMO1EXECUTEPrints demonstration page containing 
graphics and text in colour and 
monochrome.
PRINT ERROR 
LOGEXECUTE Prints a list of errors encountered by the 
printer.
COLOR PROF 
LISTEXECUTEPrints a list of the resident colour profiles.
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 119
SHUTDOWN MENU
This menu only appears if the hard disk drive is installed. This 
item should always be selected before switching the 
printer off, to ensure that no hard disk data is lost.
PRINT MENU
This menu provides adjustment of various print job related 
functions.
ITEMSETTINGSEXPLANATION
SHUTDOWN 
STARTEXECUTE Performs controlled shutdown of the printer, 
ensuring that all files on the internal hard 
disk are closed before power is turned off. 
Only power the printer off when the display 
indicates that shutdown is complete.
ITEMSETTINGSEXPLANATION
COPIES1-999 Enter the number of copies of a 
document to be printed from 1 to 
999.
DUPLEXON/OFFTurns the duplex (2-sided) printing 
function on or off if this feature is 
installed.
PAPER FEEDTRAY1
TRAY2
MP TRAYSelects the default tray for paper 
feed, Tray 1 (upper), Tray 2 (lower, if 
installed) or MP Tray (multi purpose 
tray).
AUTO TRAY 
SWITCHON
OFFIf two trays contain identical paper, 
the printer can switch to an 
alternative source when the current 
tray runs out in the middle of a print 
job.
TRAY SEQUENCEDOWN
UP
PAPER FEED 
TRAYDetermines tray sequence order 
when automatically switching.
MP TRAY USAGEDO NOT USE
WHEN 
MISMATCHIf a document to be printed demands 
a paper size not installed in the 
selected tray, the printer can 
automatically feed from the multi 
purpose tray instead. If this function 
is not enabled, the printer will stop 
and request the correct size of paper 
to be loaded.
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions> 120
MEDIA CHECKENABLE
DISABLEDetermines whether the printer 
check the size of paper loaded 
matches that required for the 
document sent to print.
RESOLUTION600x1200DPI
600DPISets the default resolution for 
printing (dots per inch). 
600x1200DPI uses more memory 
and requires more time to process, 
but prints at a higher quality.
TONER SAVE 
MODEOFF
ONReduces the amount of toner used 
for imaging. Toner saving gives 
lighter prints but is more 
economical.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals