OKI C530dn User Manual

101  –  C330/C530 Replacing Consumables and Maintenance 
4.Holding the new fuser by its handle (1), make sure that it is 
the correct way round. The retaining levers (2) should be 
fully upright, and the two locating lugs
 (3) should be towards 
you.
Downloaded From ManualsPrinter.com Manuals 

102  –  C330/C530 Replacing Consumables and Maintenance 
5.Lower the fuser into the printer, locating the two lugs into 
their slots in the sides of the printer cavity. Then push the 
two retaining levers towards the rear of the printer to lock 
the fuser in place.
6.Close the top cover and press down firmly so that the cover 
latches closed. 
Downloaded From ManualsPrinter.com Manuals 

103  –  C330/C530 Replacing Consumables and Maintenance 
Cleaning the LED Head ___________
Clean the LED heads when printing does not come out clearly, has 
white lines or when text is blurred. There is no need to switch off 
the printer to clean the LED heads.
1.Press the cover release and open the printer’s top cover fully. 
CAUTION!
Do not use methyl alcohol or other solvents on 
the LED head as damage to the lens surface will 
occur.
Downloaded From ManualsPrinter.com Manuals 

104  –  C330/C530 Replacing Consumables and Maintenance 
2.Gently wipe the LED head surfaces with a clean, lint free 
cloth.
3.Close the top cover and press down firmly so that the cover 
latches closed.
Downloaded From ManualsPrinter.com Manuals 

105  –  C330/C530 Replacing Consumables and Maintenance 
Cleaning the Housing ____________
1.Turn off the printer. 
2.Wipe the housing with a soft cloth moistened sparingly with 
water or neutral detergent. 
3.Use a soft, dry cloth to dry the housing.
CAUTION
Do not use solvents such as benzene, thinner or 
alcohol as a cleaning agent. 
Downloaded From ManualsPrinter.com Manuals 

106  –  C330/C530 Replacing Consumables and Maintenance 
4.Switch the power back on. 
Downloaded From ManualsPrinter.com Manuals 

107 – C330/C530 Available Options
Available Options
See the installation instructions supplied with the options. 
Additional Memory ______________
Oki P/N 70061801 (256 MB), 70061901 (512 MB)
The basic printer comes equipped with the following main 
memory:
• Model C330: 128 MB
• Model C530: 256 MB. 
This can be upgraded with an additional memory board of 256 
MB or 512 MB, giving a maximum total memory capacity of:
• Model C330: 640 MB.
• Model C530: 768 MB
Installation takes a few minutes, and requires...

108 – C330/C530 Available Options
Additional Paper Tray ____________
Oki P/N 44274501 
The paper tray holds 530 sheets of 20-lb. US Bond (75 g/m2) 
paper and require no tools to install.
Downloaded From ManualsPrinter.com Manuals 

109 – C330/C530 Troubleshooting
Troubleshooting
Provided that you follow the recommendations in this guide on 
the use of print media, and you keep the media in good 
condition prior to use, your printer should give years of reliable 
service. However, paper jams occasionally do occur, and this 
section explains how to clear them quickly and simply.
When a jam occurs, the printer immediately stops, and the 
Attention LED on the control panel blinks. 
If printing multiple pages (or copies), do not assume...

110 – C330/C530 Troubleshooting
Paper Sensor Error Codes _________
* If fitted.
Not shown above: Code 409, jam at face up stacker (rear exit).
Code # Location Code # Location
371 Duplex Unit 383 Duplex Unit
372 Duplex Unit 390 MP Tray
380 Paper Feed 391 Paper Tray 1
381 Paper Path 392
2
nd Paper Tray *
382 Paper Exit 400 Paper Size
Downloaded From ManualsPrinter.com Manuals