OKI B6500dn User Manual

B6500 User’s Guide> 131
Never touch a labelled area found on or near the heat roller. 
You can get burnt. If a sheet of paper is wrapped around the 
heat roller, do not try to remove it bym yourself to avoid 
injuries or burns. Switch off the machine immediately, and 
contact service.
•Remove any remaining pieces of paper.
•Remove any dust or stains with a clean dry cloth.
Cleaning the Feed Roll
When feeding cannot be done, follow the procedure below to wipe 
the feed roll gently with a well-wrung soft...

B6500 User’s Guide> 132
There are feed rolls in the interior of this printer (two locations, total 
of four), tray module (one location) and paper tray (one location).
   TJ094ano_text.jpg  
A Feed rollers (1) 
B Inside of machine (two locations) (2)
Open Cover A and after removing the drum/toner cartridge, clean 
the feed roller.  
C Tray module (one location) (3)  
Even without uninstalling the tray module, you can clean the feed 
roller after pulling out the paper tray.  
D Paper tray (one location)...

B6500 User’s Guide> 133
2.While pushing the retard part (see 
right diagram) down (1), widen the 
tab on the feed roll to loosen it (2) 
and then slowly remove the feed 
roll from the shaft of the paper 
tray (3).
3.Wipe the rubber parts with a wet 
but well-wrung soft cloth.
4.Turn the short tab of the feed roll 
to the right and slowly push it onto 
the shaft of the paper tray.
Downloaded From ManualsPrinter.com Manuals 

B6500 User’s Guide> 134
By aligning the slot of the feed roll 
with that of the shaft, push the 
feed roll completely in so that the 
short tab fits into the slot of the 
shaft.
5.Push the paper tray completely into the printer.
When Moving the Printer
Carry out the following procedure when moving the printer.
•The machine, without the optional accessories, paper 
trays, consumables and paper, weighs 18.8 kg. When 
moving the equipment, make sure that there are two 
or more persons carrying it.
•When...

B6500 User’s Guide> 135
•If the duplex unit (optional) or A4 universal tray (optional) 
has been installed, uninstall it before moving the printer. If 
these are not fixed securely to the printer, they may fall to 
the ground and cause injuries.
1.Press the power switch of this printer to the  position to 
switch the power off.
2.Remove all cords, such as the power cord and interface 
cables.
3.Remove any paper in the center output tray and return the 
paper stopper to its original position if it’s...

B6500 User’s Guide> 136
Appendix A
PCL Emulation Symbol Sets
 
10U:PC-8 CP437
11U:PC-8 D/N
12U:PC-850
17U:PC-852
9T:PC-Turkish
19U:WIN Latin1
9E:WIN Latin2
5T:WIN Latin5
7J:Desk Top
10J:PS Text
13J:Ventura Int
14J:Ventura US
6J:Microsoft Pub
8M:Math-8
PS:Math
6M:Ventura Math
15U:Pi Font
1U: Legal
1E: ISO4 UK
0U:ISO6 ASCII
0S:ISO11 Swedish
0I:ISO15 Italian
2S:ISO17 Spanish
1G:ISO21 German
0D:ISO60 Norweg
1F:ISO69 French
9U:WIN3.0 Latin1
2U:ISO2 IRV
3S:ISO10 S/F
0K:ISO14 JASCII
4S:ISO16 PORTUG
0F:ISO25...