OKI B4400 User Manual

							B4400/B4600 User’s Guide – Operation > 61
Paper/Quality tab
You can set the paper source or leave it as automatic selection 
and by using the Advanced button you have access to the same 
set of options as described above for the Layout Tab.
Downloaded From ManualsPrinter.com Manuals 
						

							B4400/B4600 User’s Guide – Operation > 62
Job Options tab
1.The output resolution of the printed page can be set as 
follows.
>The ProQ1200 setting prints at 2400 x 600dpi. This 
setting requires the most printer memory and takes 
the longest to print. It is the best option for printing 
photographs. 
>The High Quality setting prints at 1200 x 600dpi and is 
the best option for printing vector objects such as 
graphics and text.
>The Normal setting prints at 600 x 600dpi and is 
suitable for most printing jobs. You can select Toner 
Saving to save toner for some print jobs
2.You can print watermark text behind the main page 
image. This is useful for marking documents as draft, 
confidential, etc.
If you would like to print on special stationery, such as 
forms and letterhead, but do not want to use pre-printed 
stationery, you can create your own using Overlays. For 
more information on “Overlays and Macros (Windows 
1
3
4
6
7
2
Downloaded From ManualsPrinter.com Manuals 
						

							B4400/B4600 User’s Guide – Operation > 63
only)” on page 71. The Overlays button also offers 
guidelines on how to carry out manual duplex printing.
3.You can select up to 999 copies to print consecutively, 
although you will need to top up the paper tray during 
such a long print run.
4.Your printed pages can be scaled to fit larger or smaller 
stationery.
5.Using the Advanced button gives you access to the 
facility to set mirror image printing or negative image 
printing.
6.A single on-screen button restores the default settings.
SETTING FROM WINDOWS CONTROL PANEL
When you open the driver properties window directly from 
Windows, rather than from within an application program, a 
somewhat more extensive range of settings is provided. Changes 
made here will generally affect all documents you print from 
Windows applications, and will be remembered from one 
Windows session to the next.
PCL emulation
The main tabs are the General Tab, Advanced Tab and Device 
Options Tab.
Downloaded From ManualsPrinter.com Manuals 
						

							B4400/B4600 User’s Guide – Operation > 64
General tab
1.This area lists some of the main features of your printer, 
including optional items.
2.This button opens the same windows as described earlier 
for items which can be set from within application 
programs. Changes you make here, however, will become 
the new default settings for all Windows applications.
3.This button prints a test page to ensure that your printer 
is working.
1
2
3
NOTE
The above features are provided by the Windows 2000 
operating system and will vary with other operating systems.
Downloaded From ManualsPrinter.com Manuals 
						

							B4400/B4600 User’s Guide – Operation > 65
Advanced tab
1.You can specify which times of day your printer will be 
available.
2.Indicates current priority, from 1 (lowest) to 99 (highest). 
Highest priority documents will print first.
3.Specifies that documents should be spooled (stored in a 
special print file) before being printed. The document is 
then printed in the background, allowing your application 
program to become available more quickly. Options 
follow:
This specifies that printing should not start until the last 
page has been spooled. If your application program needs 
a lot of time for further computation in the middle of 
printing, causing the print job to pause for more than a 
short period, the printer could prematurely assume that 
the document has finished. Selecting this option would 
prevent that situation, but printing will be completed a 
little later, as the start is delayed.
This is the opposite choice to the one above. Printing starts 
as soon as possible after the document begins spooling.
1
2
3
5
6
7
8
9
10
4
Downloaded From ManualsPrinter.com Manuals 
						

							B4400/B4600 User’s Guide – Operation > 66
4.This specifies that the document should not be spooled, 
but printed directly. Your application will not normally be 
ready for further use until the print job is complete. This 
requires less disk space on your computer, since there is 
no spool file.
5.Directs the spooler to check the document setup and 
match it to the printer setup before sending the document 
to print. If a mismatch is detected, the document is held 
in the print queue and does not print until the printer 
setup is changed and the document restarted from the 
print queue. Mismatched documents in the queue will not 
prevent correctly matched documents from printing.
6.Specifies that the spooler should favour documents which 
have completed spooling when deciding which document 
to print next, even if completed documents are lower 
priority than documents which are still spooling. If no 
documents have completed spooling, the spooler will 
favour larger spooling documents over shorter ones. Use 
this option if you want to maximise printer efficiency. 
When this option is disabled the spooler chooses 
documents based only on their priority settings.
7.Specifies that the spooler should not delete documents 
after they are completed. This allows documents to be re 
submitted to the printer from the spooler instead of 
printing again from the application program. If you use 
this option frequently it will require large amounts of disk 
space on your computer.
8.Specifies whether advanced features, such as pages per 
sheet, are available, depending on your printer. For 
normal printing keep this option enabled. If compatibility 
problems occur you can disable the feature. However, 
these advanced options may then not be available, even 
though the hardware might support them.
9.This button provides access to the same setup windows as 
when printing from applications. Changes made via the 
Windows Control Panel become the Windows default 
settings.
10.You can design and specify a separator page that prints 
between documents. This is particularly useful on a 
Downloaded From ManualsPrinter.com Manuals 
						

							B4400/B4600 User’s Guide – Operation > 67
shared printer to help each user find their own documents 
in the output stack.
Device Options tab
In this window you can select which optional upgrades are 
installed on your printer. See the chapter entitled “Installing 
options”.
PS emulation
The main tabs are the General Tab, Advanced Tab and Device 
Settings Tab. The General and Advanced tabs are the same as 
for PCL emulation described earlier.
NOTE
The above features are provided by the Windows 2000 
operating system and will vary with other operating systems.
Downloaded From ManualsPrinter.com Manuals 
						

							B4400/B4600 User’s Guide – Operation > 68
Device Settings tab
1.You can set the desired paper sizes in each of the 
available paper feed trays.
2.You can make a variety of font settings depending on your 
application.
3.You can set which optional upgrades are installed on your 
printer. See the chapter entitled “Installing options”.
PRINTER SETTINGS IN MACINTOSH
Refer to the readme file on the drivers CD, CD1, and the online 
help provided in the driver software.
1
2
3
Downloaded From ManualsPrinter.com Manuals 
						

							B4400/B4600 User’s Guide – 2-sided printing (Windows only) > 69
2-SIDED PRINTING (WINDOWS ONLY)
To carry out 2-sided, or Manual Duplex Printing you must pass 
paper through the printer twice. You can carry out 2-sided 
printing using the Paper Tray or the Manual Feed Tray. 
2-sided Printing is supported on Windows operating systems 
only. 
MANUAL DUPLEX PRINTING USING THE PAPER TRAY
1.Ensure that there is enough paper in the Paper Tray to 
carry out the print job. 
2.Select File -> Print and click the Preferences button. In 
the 2-sided printing drop down menu, select either “Long 
Edge” or “Short Edge” according to your printing 
preferences. If you require further information, click the 
Duplex Help button. Then, Click the Print button. 
3.Every second page of your document is printed first. 
When this is complete, a message appears on screen 
prompting you to take the paper, flip it and replace it in 
the Paper Tray. 
Downloaded From ManualsPrinter.com Manuals 
						

							B4400/B4600 User’s Guide – 2-sided printing (Windows only) > 70
4.Open the Paper Tray. 
5.Take the printed paper from the Output Stacker and place 
it in the Paper Tray, ensuring that the printed side is facing 
up and the bottom of the page facing into the printer. 
6.Close the Paper Tray and press the Online button. The 
message window should disappear from your screen and 
the document finishes printing the remaining pages of 
your document. 
MANUAL DUPLEX PRINTING USING THE MANUAL FEED TRAY
1.Position the paper guides on the Manual Feed Tray 
according to the paper size.
2.Place paper one sheet at a time in the Manual Feed Tray. 
The paper is automatically gripped in position.
3.Select File -> Print to display the Print dialog box.
4.Click the Preferences button. On the 2-sided printing 
drop down menu, select either “Long Edge” or “Short 
Edge” according to your printing preferences. If you 
require further information, click the Duplex Help button
5.When every second page has printed, take the paper from 
the output stacker.
6.Set the paper one page at a time in the Manual Feed Tray 
with the printed side facing down and the top of the page 
facing into the printer. Ensure that the paper is gripped in 
place.
7.Press the Online button. The remaining pages of your 
document print on the blank side of the paper, one sheet 
at a time as you feed it into the Manual Feed Tray.
NOTE:
When using the Manual Feed Tray, feed pages one sheet at a 
time. You can use either the standard Manual Feed Tray or 
the optional Multi Purpose Tray, providing that this is 
installed.
Downloaded From ManualsPrinter.com Manuals