OKI B2400 User Manual

 Printer menus > 21 USER MENU TRAY SIZE Paper size for main tray.
TRAY 
MEDIATYPEPaper type for main tray.
TRAY MEDIA-
WEIGHTPaper weight for main tray.
MANUAL 
PAPERSIZEPaper size for manual feeder.
MANUAL 
MEDIATYPEPaper type for manual feeder.
MANUAL 
MEDIA-
WEIGHTPaper weight for manual feeder.
MEASURE Unit of measure when custom paper size is 
defined.
X-DIMENSION Width of custom paper.
Y-DIMENSION Length of custom paper.
SYSTEM 
CONFIG. 
MENUEMULATE Determines emulation mode (Auto/PCL/
PPR/FX)....

 Printer menus > 22 SYSTEM 
CONFIG. 
MENU 
(Contd.)LANGUAGE Specifies language used for report printing. 
B2400 models only.
PCL MENU
(B2400 
models only)FONT 
SOURCESpecifies location of PCL default font.
FONT NO. Specifies the PCL font number.
FRONT CPI Width of PCL default font in characters per 
inc when this is a fixed spaced font.
FONT HEIGHT Height of the PCL default font when this is a 
proportional spaced font.
SYMBOL Selects a PCL symbol character) set.
A4 WIDTH No. of characters per line for...

 Printer menus > 23 PPR MENU
(B2400 
models only)PITCH Specifies character pitch.
CONDENSE Specifies 12CPI pitch for condense mode.
CHARACTER 
SETDetermines character set for printing.
SYMBOL Determines symbol set for printing.
LETTER 0 Specifies the style that replaces character 
(9B) or (9D) with (f ) and (0).
ZERO 
CHARACTERSpecifies use of slashed or non-slashed zero 
(0) character.
LINE PITCH Specifies either 6 or 8 lines per inch.
WHITE PAGE 
SKIPDetermines whether to omit printing of 
blank...

 Printer menus > 24 FX MENU
(B2400 
models only)PITCH Specifies character pitch.
CHARACTER 
SETSpecifies required character set.
SYMBOL Specifies required symbol set.
LETTER 0 See similar for LETTER 0 in PPR menu on 
page 23.
ZERO 
CHARACTERSee similar for ZERO CHARACTER in PPR 
menu on page 23.
LINE PITCH See similar for LINE PITCH in PPR menu on 
page 23.
WHITE PAGE 
SKIPSee similar for WHITE PAGE SKIP in PPR 
menu on page 23.
CR FUNCTION See similar for PCL menu on page 22.
LINE LENGTH Sets number of...

 Printer menus > 25 NETWORK 
MENU
(B2400n only)IP ADDRESS 
SETSets fixed IP address or uses DHCP.
IP ADDRESS Sets fixed IP address.
SUBNET 
MASKSets subnet mask.
GATEWAY 
ADDRESSSets default router address. Leave at 
0.0.0.0. if no router.
WEB Enables or disables internal web pages for 
remote configuration.
SNMP Enables or disables this protocol.
HUB LINK 
SETTINGSets full or half duplex or enables automatic 
negotiation.
MEMORY 
MENU
(B2400 
models only)RECEIVE 
BUFF SIZESets receive buffer size....

 Printer menus > 26 MAINT. MENU EEPROM Resets all programmable settings to factory 
defaults.
DRUM COUNT 
RESETResets drum count when new image drum 
installed. (See “Resetting the drum counter” 
on page 28.)
SETTING Very fine adjustment of print density to 
correct streaks, light specks (reduce 
setting) or faded print (increase setting).
DARKNESS Sets print darkness.
CLEANING Prints a cleaning page.
USAGE MENU TOTAL PAGE 
COUNTShows total number of pages that have 
passed through the fuser unit.
DRUM...

 Printer menus > 27 ADMIN MENU
(System 
administrator
s only have 
access to this 
menu)ALL 
CATEGORYEnables or disables items in this menu.
INFO.
PRINT
MEDIA
SYSTEM 
CONFIG.
PCL
PPR
FX
PARALLEL
USB
NETWORK
MEMORY
ADJUST
MAINT.
USAGEEnables or disables these menus.
SIDM MN ID Sets the Pn to specify manual feed for the 
Cut Sheet Feeder control command 
(ESC EM Pn) in FX and PPR emulations.
SIDM M2 ID Similar to above but for manual feed 2.
SIDM T1 ID Similar to above but for main tray....

 Printer menus > 28
RESETTING THE DRUM COUNTER
After replacing the image drum, reset the drum counter to keep 
a correct count of the number of pages printed on the image 
drum.
1.Start the Status Monitor for the printer.
2.Select the Printer Setup tab, click on the Configuration 
button and then open the Maintenance Menu. 
3.Select “Reset Drum Count” and click on the Execute 
button to reset the drum counter.
Downloaded From ManualsPrinter.com Manuals 

LED indicators > 29
LED INDICATORS
On the front panel of your printer are four LED indicators. The 
upper-most LED is the Power ON/OFF indicator, and is 
illuminated constantly whenever power is applied and switched 
on. The other three lights have five conditions of illumination 
depending on the printer’s current status:
1. OFF—Not illuminated.
2. ON—Constantly illuminated.
3. SLOW BLINK—Flashing slowly, approximately once every 
four seconds.
4. MEDIUM BLINK—Flashing approximately once per 
second.
5....

LED indicators > 30
PRINT CARTRIDGE MIS-INSTALLED
If the print cartridge (combination of image drum and toner 
cartridge) is not located properly this will also cause the error 
light to illuminate, and it will usually be impossible to latch the 
top cover fully down. (See “Step 4” on page 15.)
TONER OR IMAGE DRUM CARTRIDGE INAPPROPRIATE
If you install either a toner cartridge or image drum unit that is 
incompatible with your printer, the error LED will flash at 
approximately 1-second intervals and the...