OKI B2400 User Manual

							 Printer menus > 21 USER MENU TRAY SIZE Paper size for main tray.
TRAY 
MEDIATYPEPaper type for main tray.
TRAY MEDIA-
WEIGHTPaper weight for main tray.
MANUAL 
PAPERSIZEPaper size for manual feeder.
MANUAL 
MEDIATYPEPaper type for manual feeder.
MANUAL 
MEDIA-
WEIGHTPaper weight for manual feeder.
MEASURE Unit of measure when custom paper size is 
defined.
X-DIMENSION Width of custom paper.
Y-DIMENSION Length of custom paper.
SYSTEM 
CONFIG. 
MENUEMULATE Determines emulation mode (Auto/PCL/
PPR/FX). B2400 models only.
CLEARABLE 
WARNINGSets the timing delay for clearable 
warnings.
AUTO 
CONTINUEDetermines whether the printer should 
automatically recover when a memory 
overflow or manual feed request occurs. 
B2400 models only.
MANUAL 
TIMEOUTTime to wait for manual paper feed before 
job is cancelled.
WAIT 
TIMEOUTTime to wait for data input to resume before 
a forced page eject occurs.
LOW TONER Determines whether printing stops when 
toner is low, or continues until printing is 
complete.
JAM 
RECOVERYWhen enabled the printer will remember a 
lost page when a jam is cleared and reprint 
it.
ERROR 
REPORTWhen enabled the printer will print and 
error report when an internal error occurs. 
Valid only for PCL XL emulation. B2400 
models only.
CATGORYITEMFUNCTIONS
Downloaded From ManualsPrinter.com Manuals 
						

							 Printer menus > 22 SYSTEM 
CONFIG. 
MENU 
(Contd.)LANGUAGE Specifies language used for report printing. 
B2400 models only.
PCL MENU
(B2400 
models only)FONT 
SOURCESpecifies location of PCL default font.
FONT NO. Specifies the PCL font number.
FRONT CPI Width of PCL default font in characters per 
inc when this is a fixed spaced font.
FONT HEIGHT Height of the PCL default font when this is a 
proportional spaced font.
SYMBOL Selects a PCL symbol character) set.
A4 WIDTH No. of characters per line for A4 paper in 
PCL mode.
WHITE PAGE 
SKIPDetermines whether to omit printing of 
blank pages in PCL mode.
CR FUNCTION Determines whether to print carriage return 
or carriage return plus line feed when a 
carriage return character is received in PCL 
mode.
LF FUNCTION Similar to CR FUNCTION but on receipt of 
line feed character.
PRINT 
MARGINSpecifies non-printable area of paper.
PEN ADJUST When enabled and minimum weight of line 
is specified in PCL mode, the line will be 
emphasized to ensure that it prints clearly.
CATGORYITEMFUNCTIONS
Downloaded From ManualsPrinter.com Manuals 
						

							 Printer menus > 23 PPR MENU
(B2400 
models only)PITCH Specifies character pitch.
CONDENSE Specifies 12CPI pitch for condense mode.
CHARACTER 
SETDetermines character set for printing.
SYMBOL Determines symbol set for printing.
LETTER 0 Specifies the style that replaces character 
(9B) or (9D) with (f ) and (0).
ZERO 
CHARACTERSpecifies use of slashed or non-slashed zero 
(0) character.
LINE PITCH Specifies either 6 or 8 lines per inch.
WHITE PAGE 
SKIPDetermines whether to omit printing of 
blank pages.
CR FUNCTION See similar for PCL menu on page 22.
LF FUNCTION See similar for PCL menu on page 22.
LINE LENGTH No. of characters per line.
FORM 
LENGTHLength of paper.
TOF 
POSITIONSets position relative to leading edge of 
paper.
LEFT MARGIN Sets position relative to left edge of paper.
FIT TO 
LETTERSelects a print mode that can fit 66 lines of 
print data into the letter size printable area.
TEXT HEIGHT Either all characters are the same height or 
their height depends on the selected 
character pitch.
CATGORYITEMFUNCTIONS
Downloaded From ManualsPrinter.com Manuals 
						

							 Printer menus > 24 FX MENU
(B2400 
models only)PITCH Specifies character pitch.
CHARACTER 
SETSpecifies required character set.
SYMBOL Specifies required symbol set.
LETTER 0 See similar for LETTER 0 in PPR menu on 
page 23.
ZERO 
CHARACTERSee similar for ZERO CHARACTER in PPR 
menu on page 23.
LINE PITCH See similar for LINE PITCH in PPR menu on 
page 23.
WHITE PAGE 
SKIPSee similar for WHITE PAGE SKIP in PPR 
menu on page 23.
CR FUNCTION See similar for PCL menu on page 22.
LINE LENGTH Sets number of characters per line to 80 or 
136.
FORM 
LENGTHSets form length to Letter, A4 or 12 inch.
TOF 
POSITIONSets first print position relative to top edge 
of paper.
LEFT MARGIN Sets first print position relative to left edge 
of paper.
FIT TO 
LETTERSee similar for PPR menu on page 23.
TEXT HEIGHT See similar for PPR menu on page 23.
PARALLEL 
MENU
(B2400 
models only)These hardware interfacing engineering functions set the 
electrical performance of the parallel interface.
USB MENU USB Enables or disables this communication 
port.
SOFT RESET Enables or disables this function.
SERIAL 
NUMBERSets USB serial number if required.
CATGORYITEMFUNCTIONS
Downloaded From ManualsPrinter.com Manuals 
						

							 Printer menus > 25 NETWORK 
MENU
(B2400n only)IP ADDRESS 
SETSets fixed IP address or uses DHCP.
IP ADDRESS Sets fixed IP address.
SUBNET 
MASKSets subnet mask.
GATEWAY 
ADDRESSSets default router address. Leave at 
0.0.0.0. if no router.
WEB Enables or disables internal web pages for 
remote configuration.
SNMP Enables or disables this protocol.
HUB LINK 
SETTINGSets full or half duplex or enables automatic 
negotiation.
MEMORY 
MENU
(B2400 
models only)RECEIVE 
BUFF SIZESets receive buffer size.
ADJUST 
MENU
(B2400 
models only)X ADJUST Fine adjustment of print image in vertical 
(direction of paper feed) direction.
Y ADJUST Fine adjustment of print position in 
horizontal direction.
PCL TRAY 0 
IDSets the number to specify Tray 0 (Manual 
Feeder) in PCL emulation.
PCL TRAY 1 
IDSets the number to specify Tray 1 (main 
paper tray) in PCL emulation.
PLACE PAGE Sets the mechanical position to left-based 
or centre-based. Used when printing on 
paper narrower than the EDIT SIZE (see 
page 20).
CATGORYITEMFUNCTIONS
Downloaded From ManualsPrinter.com Manuals 
						

							 Printer menus > 26 MAINT. MENU EEPROM Resets all programmable settings to factory 
defaults.
DRUM COUNT 
RESETResets drum count when new image drum 
installed. (See “Resetting the drum counter” 
on page 28.)
SETTING Very fine adjustment of print density to 
correct streaks, light specks (reduce 
setting) or faded print (increase setting).
DARKNESS Sets print darkness.
CLEANING Prints a cleaning page.
USAGE MENU TOTAL PAGE 
COUNTShows total number of pages that have 
passed through the fuser unit.
DRUM LIFE Shows percentage of drum life that has 
passed.
TONER Shows toner cartridge capacity (ISO) and 
percentage remaining.
CATGORYITEMFUNCTIONS
Downloaded From ManualsPrinter.com Manuals 
						

							 Printer menus > 27 ADMIN MENU
(System 
administrator
s only have 
access to this 
menu)ALL 
CATEGORYEnables or disables items in this menu.
INFO.
PRINT
MEDIA
SYSTEM 
CONFIG.
PCL
PPR
FX
PARALLEL
USB
NETWORK
MEMORY
ADJUST
MAINT.
USAGEEnables or disables these menus.
SIDM MN ID Sets the Pn to specify manual feed for the 
Cut Sheet Feeder control command 
(ESC EM Pn) in FX and PPR emulations.
SIDM M2 ID Similar to above but for manual feed 2.
SIDM T1 ID Similar to above but for main tray.
CATGORYITEMFUNCTIONS
Downloaded From ManualsPrinter.com Manuals 
						

							 Printer menus > 28
RESETTING THE DRUM COUNTER
After replacing the image drum, reset the drum counter to keep 
a correct count of the number of pages printed on the image 
drum.
1.Start the Status Monitor for the printer.
2.Select the Printer Setup tab, click on the Configuration 
button and then open the Maintenance Menu. 
3.Select “Reset Drum Count” and click on the Execute 
button to reset the drum counter.
Downloaded From ManualsPrinter.com Manuals 
						

							LED indicators > 29
LED INDICATORS
On the front panel of your printer are four LED indicators. The 
upper-most LED is the Power ON/OFF indicator, and is 
illuminated constantly whenever power is applied and switched 
on. The other three lights have five conditions of illumination 
depending on the printer’s current status:
1. OFF—Not illuminated.
2. ON—Constantly illuminated.
3. SLOW BLINK—Flashing slowly, approximately once every 
four seconds.
4. MEDIUM BLINK—Flashing approximately once per 
second.
5. FAST BLINK—Flashing very fast, approximately four 
times per second (flickering).
STATUS MONITOR INDICATION
In most cases the Windows status monitor, installed along with 
the printer driver software if you used the installer program on 
the supplied CD, will tell you what the current printer status is. 
You should first consult this. If the message does not help, then 
the status LEDs on the front of your printer will provide a 
secondary indication.
ERROR INDICATIONS
The error LED is the bottom-most LED on the front of your 
printer.
If your printer detects an error condition the error LED will 
illuminate, either continuously or flashing. In this situation the 
printer may refuse to print or stop printing in the middle of a job, 
depending on the cause of the problem.
PAPER JAM
If the paper jams during printing the printer will stop immediately 
and the error LED will flash at approximately 1-second intervals. 
In this case the cause will be fairly obvious, since the jammed 
sheet will be partially visible out of either the front or the top of 
the printer. (See “Clearing paper jams” on page 14.)
Downloaded From ManualsPrinter.com Manuals 
						

							LED indicators > 30
PRINT CARTRIDGE MIS-INSTALLED
If the print cartridge (combination of image drum and toner 
cartridge) is not located properly this will also cause the error 
light to illuminate, and it will usually be impossible to latch the 
top cover fully down. (See “Step 4” on page 15.)
TONER OR IMAGE DRUM CARTRIDGE INAPPROPRIATE
If you install either a toner cartridge or image drum unit that is 
incompatible with your printer, the error LED will flash at 
approximately 1-second intervals and the printer will not start.
LOW TONER CONDITION
If the toner cartridge is out of toner the error LED will flash. In 
this case you may be able to resume printing for a small number 
of pages by opening and then closing the top cover. Note also 
that this condition may be occur even after you have installed a 
new toner cartridge if you forget to correctly position the 
coloured toner lever when installing the toner cartridge. (See 
instruction sheet supplied with new toner cartridge.)
OTHER POSSIBLE ERROR CONDITIONS
If your printer, or the printing preferences on your computer 
specify a different paper size or media type than the one you are 
using, this may cause an error condition to occur. (See “Setting 
printing preferences” on page 16.)
If an error only occurs when trying to print one particular job, it 
may be that the page contains corrupted data, or data that is too 
complex for the amount of available printer memory. In this case 
try to simplify the page content.
HARDWARE FAULT INDICATION
If your printer develops a hardware fault all three status LEDs will 
flash fast (flicker approximately four times a second). In this case 
you should contact your service representative or your Oki dealer 
for advice and support.
Downloaded From ManualsPrinter.com Manuals