Oce CS2044 User Manual
Have a look at the manual Oce CS2044 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Oce manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
36 Chapter 1 Read this first
Loading Roll Media
[3]
17.Press [ ] or [ ] button to select the type of roll media you loaded, then press the
OK button.
[91]
[92]
An equals = mark is displayed to the left of the option to show the media type that
has been selected, and the printer begins preparing to feed the roll media.
Océ Media nameName Printer Operating Panel
IJM005 Océ Draft Paper Draft Paper
IJM020 Océ Standard Paper Standard Paper
IJM113 Océ Premium Paper 90g/m2 Premium Paper
IJM150 Océ...](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-35.png "Page 36
36 Chapter 1 Read this first
Loading Roll Media
[3]
17.Press [ ] or [ ] button to select the type of roll media you loaded, then press the
OK button.
[91]
[92]
An equals = mark is displayed to the left of the option to show the media type that
has been selected, and the printer begins preparing to feed the roll media.
Océ Media nameName Printer Operating Panel
IJM005 Océ Draft Paper Draft Paper
IJM020 Océ Standard Paper Standard Paper
IJM113 Océ Premium Paper 90g/m2 Premium Paper
IJM150 Océ...")
![Page 37
37
Loading Roll Media
Attention: Always set the Media Type setting to the type of roll media loaded
in the printer.If the media type setting does not match the loaded roll media,
printing quality may be reduced.
18.Press the [ ] or [ ] button to select the setting for the roll media length, and then
press the OK button.
[93]
[94]
When the printer has finished preparing to feed the roll media, Online is displayed
on the printer display and the printer is ready to print.
Roll Length Set
30.0m...](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-36.png "Page 37
37
Loading Roll Media
Attention: Always set the Media Type setting to the type of roll media loaded
in the printer.If the media type setting does not match the loaded roll media,
printing quality may be reduced.
18.Press the [ ] or [ ] button to select the setting for the roll media length, and then
press the OK button.
[93]
[94]
When the printer has finished preparing to feed the roll media, Online is displayed
on the printer display and the printer is ready to print.
Roll Length Set
30.0m...")
![Page 38
38 Chapter 1 Read this first
Adjusting the Print Status
Adjusting the Print Status
Adjusting the Printhead Position
Note: It is recommended that you run the printhead adjustment using the type of
media that you use most frequently.
Note: If you are using cut sheets, load at least one sheet of unused A3 or larger
paper (not the blank side of used paper) in landscape orientation.
19.Press the Online button to display MAIN MENU on the printer display.[95]
[96]
20.Press the [ ] or [ ] buttons to select...](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-37.png "Page 38
38 Chapter 1 Read this first
Adjusting the Print Status
Adjusting the Print Status
Adjusting the Printhead Position
Note: It is recommended that you run the printhead adjustment using the type of
media that you use most frequently.
Note: If you are using cut sheets, load at least one sheet of unused A3 or larger
paper (not the blank side of used paper) in landscape orientation.
19.Press the Online button to display MAIN MENU on the printer display.[95]
[96]
20.Press the [ ] or [ ] buttons to select...")
![Page 39
39
Adjusting the Print Status
22.Select Advanced Adj. then press the [ ] button.[101]
[102]
23.Press the [ ] or [ ] button to select Ye s, then press the OK button.[103]
[104]
The printhead adjustment pattern is printed.[105]
The printer scans the resulting printout as it is printed, and automatically calibrates
the printhead adjustment values.
When the calibration has finished, the printer returns online.
Printhead Adj
Advanced Adj.
Advanced Adj.
Yes
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-38.png "Page 39
39
Adjusting the Print Status
22.Select Advanced Adj. then press the [ ] button.[101]
[102]
23.Press the [ ] or [ ] button to select Ye s, then press the OK button.[103]
[104]
The printhead adjustment pattern is printed.[105]
The printer scans the resulting printout as it is printed, and automatically calibrates
the printhead adjustment values.
When the calibration has finished, the printer returns online.
Printhead Adj
Advanced Adj.
Advanced Adj.
Yes
Downloaded From ManualsPrinter.com Manuals")
![Page 40
40 Chapter 1 Read this first
Adjusting the Print Status
Media Feed Adjustment
Attention: Before you adjust the amount of media feed, you need to configure
the media type setting using the operation panel to match the media loaded in the
printer. If the media type selection does not match the media loaded in the printer,
you will not achieve the correct print results and the printing quality will be
reduced.
24.Press the Online button to display MAIN MENU on the printer display.[106]
[107]
25.Press...](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-39.png "Page 40
40 Chapter 1 Read this first
Adjusting the Print Status
Media Feed Adjustment
Attention: Before you adjust the amount of media feed, you need to configure
the media type setting using the operation panel to match the media loaded in the
printer. If the media type selection does not match the media loaded in the printer,
you will not achieve the correct print results and the printing quality will be
reduced.
24.Press the Online button to display MAIN MENU on the printer display.[106]
[107]
25.Press...")
![Page 41
41
Adjusting the Print Status
27.Select Standard Adj. then press the [ ] button.[112]
[113]
28.Press the [ ] or [ ] button to select Ye s, then press the OK button.[114]
[115]
The media feed adjustment pattern is printed.[116]
The printer scans the printout as it is printing and automatically calibrates the media
feed settings for the currently selected media type. There are separate media feed
settings for each different media type.
When the calibration is complete, the Online lamp turns on and...](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-40.png "Page 41
41
Adjusting the Print Status
27.Select Standard Adj. then press the [ ] button.[112]
[113]
28.Press the [ ] or [ ] button to select Ye s, then press the OK button.[114]
[115]
The media feed adjustment pattern is printed.[116]
The printer scans the printout as it is printing and automatically calibrates the media
feed settings for the currently selected media type. There are separate media feed
settings for each different media type.
When the calibration is complete, the Online lamp turns on and...")
![Page 43
43
Installing for Windows
31.Follow the procedure to complete the installation.
When the port connection screen appears, connect the USB cable to the printer and
the computer.
[119]
Connecting the LAN Cable
Note: The following operating systems support a TCP/IP network connection:
Windows Server 2003, Windows XP, Windows 2000, Windows Me, Windows 98, or
Windows NT 4.0 (Service Pack 6 or later).
Attention: When this printer is connected to and used on a network, switch the
printer on then check the...](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-42.png "Page 43
43
Installing for Windows
31.Follow the procedure to complete the installation.
When the port connection screen appears, connect the USB cable to the printer and
the computer.
[119]
Connecting the LAN Cable
Note: The following operating systems support a TCP/IP network connection:
Windows Server 2003, Windows XP, Windows 2000, Windows Me, Windows 98, or
Windows NT 4.0 (Service Pack 6 or later).
Attention: When this printer is connected to and used on a network, switch the
printer on then check the...")
![Page 45
45
Stowing the Output Stacker
Stowing the Output Stacker
1.Grasp the centre of the front output stacker rod (a) and pull it up slightly.[123]
2.Then simply pull the output stacker rod (a) out towards you.[124]
a
a
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-44.png "Page 45
45
Stowing the Output Stacker
Stowing the Output Stacker
1.Grasp the centre of the front output stacker rod (a) and pull it up slightly.[123]
2.Then simply pull the output stacker rod (a) out towards you.[124]
a
a
Downloaded From ManualsPrinter.com Manuals")
![Page 46
46 Chapter 1 Read this first
Stowing the Output Stacker
3.Lower the output stacker rod (a).[125]
Note: To reattach the output stacker, perform the steps above in reverse.
a
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-45.png "Page 46
46 Chapter 1 Read this first
Stowing the Output Stacker
3.Lower the output stacker rod (a).[125]
Note: To reattach the output stacker, perform the steps above in reverse.
a
Downloaded From ManualsPrinter.com Manuals")
41 Adjusting the Print Status 27.Select Standard Adj. then press the [ ] button.[112] [113] 28.Press the [ ] or [ ] button to select Ye s, then press the OK button.[114] [115] The media feed adjustment pattern is printed.[116] The printer scans the printout as it is printing and automatically calibrates the media feed settings for the currently selected media type. There are separate media feed settings for each different media type. When the calibration is complete, the Online lamp turns on and the printer is ready to print. Adjust Band Standard Adj. Standard Adj. Yes Downloaded From ManualsPrinter.com Manuals
42 Chapter 1 Read this first Installing for Windows Installing for Windows Connecting USB Attention: Do not connect the cable yet. If you connect the cable now, this may prevent the printer driver from installing correctly. Attention: Make sure that the printer is switched on. Attention: If your are using Windows Server 2003 or Windows XP, or Windows 2000, you must log in as a member of the Administrator group. Attention: Be sure to use a USB 2.0 standard connection cable. 29.Mount the provided User Software CD-ROM in the computer CD-ROM drive.[117] 30.Start the wizard. Double-click setup.exe which you can find on the Océ CS2044 CD-rom. [118] Downloaded From ManualsPrinter.com Manuals
43 Installing for Windows 31.Follow the procedure to complete the installation. When the port connection screen appears, connect the USB cable to the printer and the computer. [119] Connecting the LAN Cable Note: The following operating systems support a TCP/IP network connection: Windows Server 2003, Windows XP, Windows 2000, Windows Me, Windows 98, or Windows NT 4.0 (Service Pack 6 or later). Attention: When this printer is connected to and used on a network, switch the printer on then check the LINK lamp to confirm that it lights and remains on. This lamp lights green with a 100-Base-TX connection and lights yellow for a 10-BaseT connection. Attention: Refer to the “Chapter 5 of the User’s Guide” if the connection does not operate properly. 32.Connect the LAN port on the rear of the printer to the HUB port with a LAN cable.[120] USB Connection USB Printer back Computer Downloaded From ManualsPrinter.com Manuals
44 Chapter 1 Read this first Installing for Windows Installing the Printer Driver Attention: If you are using Windows Server 2003, Windows XP, Windows 2000, or Windows NT 4.0, you must log in as a member of the Administrator group. Attention: If you are using Windows NT 4.0, open Network from the Control Panel in the Start menu and confirm that Microsoft TCP/IP Printing is installed and on the list on the Service sheet. 33.Connecting the Printer to a Network for the First Time Mount the provided User Software CD-ROM in the computer CD-ROM drive. [121] 34.Start the wizard. Double-click setup.exe which you can find on the Océ CS2044 CD-rom. [122] 35.Follow the procedure to complete the installation. Downloaded From ManualsPrinter.com Manuals
45 Stowing the Output Stacker Stowing the Output Stacker 1.Grasp the centre of the front output stacker rod (a) and pull it up slightly.[123] 2.Then simply pull the output stacker rod (a) out towards you.[124] a a Downloaded From ManualsPrinter.com Manuals
46 Chapter 1 Read this first Stowing the Output Stacker 3.Lower the output stacker rod (a).[125] Note: To reattach the output stacker, perform the steps above in reverse. a Downloaded From ManualsPrinter.com Manuals
47 If the output stacker arm disengages If the output stacker arm disengages Illustration [126] [127] 1.Turn the output stacker arm (a) in the direction indicated by the arrow.[128] d e d f a Downloaded From ManualsPrinter.com Manuals
48 Chapter 1 Read this first If the output stacker arm disengages 2.Slide the rotated output stacker arm (b) in until it clicks into the 2 holes (c). If the rear output stacker rod (d) has dropped down, fit the output stacker arm (b) in place before re-attaching the output stacker rod. [129] c b d Downloaded From ManualsPrinter.com Manuals