Oce CS2044 User Manual
Have a look at the manual Oce CS2044 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Oce manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
26 Chapter 1 Read this first
Installing the Printhead
5.Hold the printhead by the grips (a) and remove it from the case, then remove the
protective orange cap 1 (b).
[67]
6.Push the tabs (d) on either side of printhead protective cap 2 (c) as shown in the
diagram, and pull down to remove the cap.
[68]
[69]
[69] Do not touch the nozzles (e) or the electrical contacts (f)
Attention: The printhead contains protective nozzle ink. If ink leaks, it may soil
the printer or peripherals. It is recommended...](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-25.png "Page 26
26 Chapter 1 Read this first
Installing the Printhead
5.Hold the printhead by the grips (a) and remove it from the case, then remove the
protective orange cap 1 (b).
[67]
6.Push the tabs (d) on either side of printhead protective cap 2 (c) as shown in the
diagram, and pull down to remove the cap.
[68]
[69]
[69] Do not touch the nozzles (e) or the electrical contacts (f)
Attention: The printhead contains protective nozzle ink. If ink leaks, it may soil
the printer or peripherals. It is recommended...")
![Page 28
28 Chapter 1 Read this first
Installing the Printhead
9.Push the printhead fixer lever toward the back of the printer and then press down
until you hear it click.
[72]
10.Close the top cover.[73]
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-27.png "Page 28
28 Chapter 1 Read this first
Installing the Printhead
9.Push the printhead fixer lever toward the back of the printer and then press down
until you hear it click.
[72]
10.Close the top cover.[73]
Downloaded From ManualsPrinter.com Manuals")
![Page 29
29
Installing the Ink Tanks
Installing the Ink Tanks
1.Open the right back cover.[74]
2.Press the ink tank lever of the color you are loading to open the ink tank cover.[75]
3.Gently shake the ink tank 7 or 8 times while it is still in the bag before removing it
from the bag. Insert the ink tank into the ink tank holder with the ink supply port
facing down and the color label facing away from you.
[76]
[77]
[77] Attention
Bk Bk
bca
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-28.png "Page 29
29
Installing the Ink Tanks
Installing the Ink Tanks
1.Open the right back cover.[74]
2.Press the ink tank lever of the color you are loading to open the ink tank cover.[75]
3.Gently shake the ink tank 7 or 8 times while it is still in the bag before removing it
from the bag. Insert the ink tank into the ink tank holder with the ink supply port
facing down and the color label facing away from you.
[76]
[77]
[77] Attention
Bk Bk
bca
Downloaded From ManualsPrinter.com Manuals")
![Page 31
31
Installing the Ink Tanks
4.Close the ink tank cover until you hear a click.[78]
5.Repeat steps 1 to 4 to install the other ink tank colors.
6.Close the right back cover after you have installed all of the ink tank colors.[79]
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-30.png "Page 31
31
Installing the Ink Tanks
4.Close the ink tank cover until you hear a click.[78]
5.Repeat steps 1 to 4 to install the other ink tank colors.
6.Close the right back cover after you have installed all of the ink tank colors.[79]
Downloaded From ManualsPrinter.com Manuals")
![Page 32
32 Chapter 1 Read this first
Loading Roll Media
Loading Roll Media
Attention: When you are handling roll media, it is recommended that you wear
clean fabric gloves to protect the printing surface.
7.Raise the holder stopper lever (a) from the axle to unlock the holder stopper, and then
remove the holder stopper from the roll holder.
[80]
8.Position the roll so that the leading edge of media is at the bottom and facing away
from you, then push the roll holder firmly into the media roll from the right...](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-31.png "Page 32
32 Chapter 1 Read this first
Loading Roll Media
Loading Roll Media
Attention: When you are handling roll media, it is recommended that you wear
clean fabric gloves to protect the printing surface.
7.Raise the holder stopper lever (a) from the axle to unlock the holder stopper, and then
remove the holder stopper from the roll holder.
[80]
8.Position the roll so that the leading edge of media is at the bottom and facing away
from you, then push the roll holder firmly into the media roll from the right...")
![Page 33
33
Loading Roll Media
10.Open the top cover and then open the ejection guide.[83]
11.Orient the roll holder with the front edge of the roll media facing you, then align the
roll holder (b) with the left and right guide grooves (c) in the roll holder slot and
insert the roll holder.
[84]
bb c
c
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-32.png "Page 33
33
Loading Roll Media
10.Open the top cover and then open the ejection guide.[83]
11.Orient the roll holder with the front edge of the roll media facing you, then align the
roll holder (b) with the left and right guide grooves (c) in the roll holder slot and
insert the roll holder.
[84]
bb c
c
Downloaded From ManualsPrinter.com Manuals")
![Page 34
34 Chapter 1 Read this first
Loading Roll Media
12.Pull out the leading edge of the roll media keeping both left and right sides level, and
insert the media into the paper feed slot (d), and feed the paper until it reaches the
paperweight (e).
[85]
Once the media reaches the paperweight, it is automatically fed through to the
platen.
13.Close the ejection guide.[86]
14.Grasp the center of the leading edge of the media and lift up the release lever.[87]
e
d
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-33.png "Page 34
34 Chapter 1 Read this first
Loading Roll Media
12.Pull out the leading edge of the roll media keeping both left and right sides level, and
insert the media into the paper feed slot (d), and feed the paper until it reaches the
paperweight (e).
[85]
Once the media reaches the paperweight, it is automatically fed through to the
platen.
13.Close the ejection guide.[86]
14.Grasp the center of the leading edge of the media and lift up the release lever.[87]
e
d
Downloaded From ManualsPrinter.com Manuals")
![Page 35
35
Loading Roll Media
15.Gently pull on the center of the leading edge of the roll media as far as the ejection
guide (f) and align the right edge of the media with the right edge of the paper
alignment line (g), then lower the release lever.
[88]
Attention: Do not pull strongly on the roll media when you align it with the
paper alignment line. The roll media may not feed out straight in some cases.
16.Close the top cover.[89]
[90]
[90] Media Type is displayed.
You can load the types of media shown...](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-34.png "Page 35
35
Loading Roll Media
15.Gently pull on the center of the leading edge of the roll media as far as the ejection
guide (f) and align the right edge of the media with the right edge of the paper
alignment line (g), then lower the release lever.
[88]
Attention: Do not pull strongly on the roll media when you align it with the
paper alignment line. The roll media may not feed out straight in some cases.
16.Close the top cover.[89]
[90]
[90] Media Type is displayed.
You can load the types of media shown...")
![Page 36
36 Chapter 1 Read this first
Loading Roll Media
[3]
17.Press [ ] or [ ] button to select the type of roll media you loaded, then press the
OK button.
[91]
[92]
An equals = mark is displayed to the left of the option to show the media type that
has been selected, and the printer begins preparing to feed the roll media.
Océ Media nameName Printer Operating Panel
IJM005 Océ Draft Paper Draft Paper
IJM020 Océ Standard Paper Standard Paper
IJM113 Océ Premium Paper 90g/m2 Premium Paper
IJM150 Océ...](http://img.usermanuals.tech/thumb/3543/37512/w64_Oce_CS2044-35.png "Page 36
36 Chapter 1 Read this first
Loading Roll Media
[3]
17.Press [ ] or [ ] button to select the type of roll media you loaded, then press the
OK button.
[91]
[92]
An equals = mark is displayed to the left of the option to show the media type that
has been selected, and the printer begins preparing to feed the roll media.
Océ Media nameName Printer Operating Panel
IJM005 Océ Draft Paper Draft Paper
IJM020 Océ Standard Paper Standard Paper
IJM113 Océ Premium Paper 90g/m2 Premium Paper
IJM150 Océ...")
31 Installing the Ink Tanks 4.Close the ink tank cover until you hear a click.[78] 5.Repeat steps 1 to 4 to install the other ink tank colors. 6.Close the right back cover after you have installed all of the ink tank colors.[79] Downloaded From ManualsPrinter.com Manuals
32 Chapter 1 Read this first Loading Roll Media Loading Roll Media Attention: When you are handling roll media, it is recommended that you wear clean fabric gloves to protect the printing surface. 7.Raise the holder stopper lever (a) from the axle to unlock the holder stopper, and then remove the holder stopper from the roll holder. [80] 8.Position the roll so that the leading edge of media is at the bottom and facing away from you, then push the roll holder firmly into the media roll from the right side until it is flush with the media core. [81] 9.Attach the holder stopper to the left side of the roll holder and insert it until it touches the core of the roll, then push the holder stopper lever (a) down toward the shaft to lock it. [82] a a Downloaded From ManualsPrinter.com Manuals
33 Loading Roll Media 10.Open the top cover and then open the ejection guide.[83] 11.Orient the roll holder with the front edge of the roll media facing you, then align the roll holder (b) with the left and right guide grooves (c) in the roll holder slot and insert the roll holder. [84] bb c c Downloaded From ManualsPrinter.com Manuals
34 Chapter 1 Read this first Loading Roll Media 12.Pull out the leading edge of the roll media keeping both left and right sides level, and insert the media into the paper feed slot (d), and feed the paper until it reaches the paperweight (e). [85] Once the media reaches the paperweight, it is automatically fed through to the platen. 13.Close the ejection guide.[86] 14.Grasp the center of the leading edge of the media and lift up the release lever.[87] e d Downloaded From ManualsPrinter.com Manuals
35 Loading Roll Media 15.Gently pull on the center of the leading edge of the roll media as far as the ejection guide (f) and align the right edge of the media with the right edge of the paper alignment line (g), then lower the release lever. [88] Attention: Do not pull strongly on the roll media when you align it with the paper alignment line. The roll media may not feed out straight in some cases. 16.Close the top cover.[89] [90] [90] Media Type is displayed. You can load the types of media shown in the following table onto the roll holder. Set the media type setting to match the type of the media you are using. The display only shows the types of paper that can be used with the type of black ink loaded in the printer. g f Media Type Plain Paper Downloaded From ManualsPrinter.com Manuals
36 Chapter 1 Read this first Loading Roll Media [3] 17.Press [ ] or [ ] button to select the type of roll media you loaded, then press the OK button. [91] [92] An equals = mark is displayed to the left of the option to show the media type that has been selected, and the printer begins preparing to feed the roll media. Océ Media nameName Printer Operating Panel IJM005 Océ Draft Paper Draft Paper IJM020 Océ Standard Paper Standard Paper IJM113 Océ Premium Paper 90g/m2 Premium Paper IJM150 Océ SmartMatt Paper SmartMatt Paper IJM215 Océ SmartFitPlus PhotoGloss SmartFit Photo IJM250 Océ Smart Dry Photo Paper Gloss Smart Dry Photo IJM311 Océ Double Matt Film DM Film IJM138 Océ Transparent Paper 90g/m2 Transp. Paper 86500 Océ Check Plot Bond Check Plot Bond 86800 Océ Deluxe Bond Deluxe Bond 862024 Océ Premium Color Bond Premium Bond AMPP07 Océ PrintPerfect Alternative Matte Photopaper PrintPerfect GIPPLS7 Océ PhotoPerfect Plus Glossy Photopaper PhotoPerfect PSDRY8 Océ Instant Dry Photopaper Photo Dry 868342 Océ Double Matte Film 4 mil Ink Jet Film 866020 Océ Color Vellum 20 lb. Premium Vellum Media Type HW Coated Downloaded From ManualsPrinter.com Manuals
37 Loading Roll Media Attention: Always set the Media Type setting to the type of roll media loaded in the printer.If the media type setting does not match the loaded roll media, printing quality may be reduced. 18.Press the [ ] or [ ] button to select the setting for the roll media length, and then press the OK button. [93] [94] When the printer has finished preparing to feed the roll media, Online is displayed on the printer display and the printer is ready to print. Roll Length Set 30.0m Downloaded From ManualsPrinter.com Manuals
38 Chapter 1 Read this first Adjusting the Print Status Adjusting the Print Status Adjusting the Printhead Position Note: It is recommended that you run the printhead adjustment using the type of media that you use most frequently. Note: If you are using cut sheets, load at least one sheet of unused A3 or larger paper (not the blank side of used paper) in landscape orientation. 19.Press the Online button to display MAIN MENU on the printer display.[95] [96] 20.Press the [ ] or [ ] buttons to select Adjust Printer then press the [ ] button.[97] [98] 21.Select Printhead Adj. then press the [ ] button.[99] [100] Stop/Eject Online Offline Menu MAIN MENU Head Cleaning MAIN MENU Adjust Printer Adjust Printer Printhead Adj Downloaded From ManualsPrinter.com Manuals
39 Adjusting the Print Status 22.Select Advanced Adj. then press the [ ] button.[101] [102] 23.Press the [ ] or [ ] button to select Ye s, then press the OK button.[103] [104] The printhead adjustment pattern is printed.[105] The printer scans the resulting printout as it is printed, and automatically calibrates the printhead adjustment values. When the calibration has finished, the printer returns online. Printhead Adj Advanced Adj. Advanced Adj. Yes Downloaded From ManualsPrinter.com Manuals
40 Chapter 1 Read this first Adjusting the Print Status Media Feed Adjustment Attention: Before you adjust the amount of media feed, you need to configure the media type setting using the operation panel to match the media loaded in the printer. If the media type selection does not match the media loaded in the printer, you will not achieve the correct print results and the printing quality will be reduced. 24.Press the Online button to display MAIN MENU on the printer display.[106] [107] 25.Press the [ ] or [ ] buttons to select Adjust Printer then press the [ ] button.[108] [109] 26.Press the [ ] or [ ] buttons to select Adjust Band, then press the [ ] button.[110] [111] Stop/Eject Online Offline Menu MAIN MENU Head Cleaning MAIN MENU Adjust Printer Adjust Printer Adjust Band Downloaded From ManualsPrinter.com Manuals