Oai Voicemail DisconNECt Installation And Operation Manual

NDA-30130  Revision 1Page 5
Voicemail Disconnect Installation & Operation Manual INSTALLATION & SET-UP
Configuring the Tenant Number Database
This database must be configured before the Voicemail Disconnect application can 
operate. The database values are set using the APM Applications Manager Main 
Menu-- Selecting the Database Administration option. The general sequence is 
the following:
1. Build a Master Database File
Enter data into the master database fields to add the necessary phone line...

Page 6NDA-30130  Revision 1
INSTALLATION & SET-UP Voicemail Disconnect Installation & Operation Manual
MAT AssignmentsThis manual assumes that data settings that affect the operation of all OAI software 
on a system-wide basis have already been assigned on the NEAX Maintenance 
Administration Terminal (MAT). Such settings include system index values and 
assignment of Interface I/O Port Data in the Interface Processor (IP). For more 
information about these system data settings and the MAT commands...

NDA-30130  Revision 1Page 7
Voicemail Disconnect Installation & Operation Manual INSTALLATION & SET-UP
Mat Assignments 
(cont)AOKC Command: (Assignment of OAI Key Codes)
This command is used to associate the MSF facility and its Op-Code that was 
configured in the APM for the application to one of the OAI Key Codes in the 
MAT. 
Step 1:
Select an unused OAI Key Code, from 1 to 14. To determine what Key 
Codes are available for assignment, use the LOKC command to list the 
AOKC Key Codes that are already...

Page 8NDA-30130  Revision 1
INSTALLATION & SET-UP Voicemail Disconnect Installation & Operation Manual
Mat Assignments 
(cont)Example MAT Configuration
In the example illustrated below, MSF was selected in the APM Application 
Configuration, and its Op-Code was determined to be #129. MSF #129 is then 
assigned through the AOKC command to an OAI Key Code.
For this example, the OAI Key Code is #3. The D
term function key that is to be used 
to access Voicemail Disconnect in this example is function key #8....

NDA-30130   Revision 1Page 9
Voicemail Disconnect Installation & Operation Manual OPERATION
Chapter 2 OPERATION
Using 
Voicemail Disconnect
Voicemail Disconnect is used by pressing the Dterm OAI key assigned to the 
Voicemail Disconnect function. If the assigned key for this function is unknown, 
see your system administrator. 
One of four status messages may be displayed on your phone when Voicemail 
Disconnect is invoked:
RELEASED- The request is successful, call has been disconnected.
FAILED- The...

OPERATION Voicemail Disconnect Installation & Operation Manual
Page 10NDA-30130   Revision 1
This Page Left Blank.