Oai Voicemail DisconNECt Installation And Operation Manual

							NDA-30130  Revision 1Page 5
Voicemail Disconnect Installation & Operation Manual INSTALLATION & SET-UP
Configuring the Tenant Number Database
This database must be configured before the Voicemail Disconnect application can 
operate. The database values are set using the APM Applications Manager Main 
Menu-- Selecting the Database Administration option. The general sequence is 
the following:
1. Build a Master Database File
Enter data into the master database fields to add the necessary phone line 
numbers.
2. Process the Application Database 
Use the Process Application Database option on the APM Database 
Administration menu to create the application database file.
(When the Process option is activated, data is drawn from the master database 
and converted to the formats specified in the application definition file.)
3. Install the Application Database
Use the Install Application Database option on the APM Database 
Administration menu to enable Voicemail Disconnect to copy its database.
Note:Refer to the APM Operations Manual for more detailed instructions on adding a 
database.
Database 
AdministrationAny future administrative changes to the Voicemail Disconnect databases are made 
through the APM Database Administration option. Refer to the instructions 
provided in the APM System Administration Manual
 to make changes to these 
databases.
Continue to the next page to make the MAT assignments... 
						

							Page 6NDA-30130  Revision 1
INSTALLATION & SET-UP Voicemail Disconnect Installation & Operation Manual
MAT AssignmentsThis manual assumes that data settings that affect the operation of all OAI software 
on a system-wide basis have already been assigned on the NEAX Maintenance 
Administration Terminal (MAT). Such settings include system index values and 
assignment of Interface I/O Port Data in the Interface Processor (IP). For more 
information about these system data settings and the MAT commands described 
below for Voicemail Disconnect, refer to the OAI Module Installation Manual for 
the NEAX2400 IMS, the NEAX2400 IMS Command Manual, the NEAX2400 IMS 
Job Specification Manual, and the NEAX2400 IMS Programming Manual.
Using the AOKC command, assign the MSF facility and its Op-Code to one of the 
14 OAI Key Codes in the MAT. Each of these OAI Key Codes corresponds to an 
AKYD Function Key Index (FKI) value that is then assigned to the specific D
term 
function key. This process is illustrated below.
Figure 1-1   OAI Function Key Assignments
A knowledge of the Dterm stations in the NEAX system and which ones will be set 
up to access Voicemail Disconnect is needed to use the necessary MAT commands.
Continue to the next section to set-up these various MAT assignments...
APM
Application
Configuration
Designation of
 Facility 
(Type)
 and its Op-
Code
 for Use by 
Application
MAT
AOKC
Command
Assignment of
 an OAI 
Key Code
 (between 1 
and 14)
 to the Same 
Facility Type and Op-
Code
MAT
AKYD
Command
Assignment of 
Corresponding MAT 
Function Key Index to 
a
 specific Dterm 
Function Key
. . . . .. . . . .
. . .
. . .
  
PBX Correspondence of
 AOKC AKYD
  OAI Function
 Key Codes
Key Indices
  1 < . . . .> 34
  2 < . . . .> 35
  3 < . . . .> 36
  4 < . . . .> 37
  5 < . . . .> 38
  6 < . . . .> 39
  7 < . . . .> 40
  8 < . . . .> 41
  9 < . . . .> 42
 10 < . . . .> 43
 11 < . . . .> 44
 12 < . . . .> 45
 13 < . . . .> 46
 14 < . . . .> 47 
						

							NDA-30130  Revision 1Page 7
Voicemail Disconnect Installation & Operation Manual INSTALLATION & SET-UP
Mat Assignments 
(cont)AOKC Command: (Assignment of OAI Key Codes)
This command is used to associate the MSF facility and its Op-Code that was 
configured in the APM for the application to one of the OAI Key Codes in the 
MAT. 
Step 1:
Select an unused OAI Key Code, from 1 to 14. To determine what Key 
Codes are available for assignment, use the LOKC command to list the 
AOKC Key Codes that are already assigned. 
Step 2:
Enter the type of facility using the value that designates the MSF. 
Step 3:
Enter the same MSF Op-Code that was configured for Voicemail 
Disconnect in the APM. Retrieve it using the Providers command on the 
APM Applications Configuration Entry screen. 
AKYD Command: (Assignment of Dterm Function Key)
MAT Function Key Indexes #34 to #47 have been designated for use in the OAI 
system and correspond to the 14 OAI Key Codes as illustrated in Figure 1-1 on 
page 6. The AKYD command is used to assign a D
term function key to the specific 
MAT Function Key Index that, in turn, corresponds to the previously assigned OAI 
Key Code. This command must be used to assign the function key on each D
term 
that is to be set up with access to Voicemail Disconnect. 
Step 1:
Determine the specific Dterm function key designated in the application 
configuration as the key that is to be pressed to activate Voicemail 
Disconnect from the D
term.
Step 2:
Enter the same tenant number that is configured for the application in the 
APM Application Configuration option (default is 1).
Step 3:
Enter the station number of the Dterm on which the function key is being 
assigned.
Step 4:
Enter the Dterm function key to the MAT Function Key Index that in turn 
corresponds to the previously assigned OAI Key Code.
Step 5:
Assign the virtual line, such as the subline. 
						

							Page 8NDA-30130  Revision 1
INSTALLATION & SET-UP Voicemail Disconnect Installation & Operation Manual
Mat Assignments 
(cont)Example MAT Configuration
In the example illustrated below, MSF was selected in the APM Application 
Configuration, and its Op-Code was determined to be #129. MSF #129 is then 
assigned through the AOKC command to an OAI Key Code.
For this example, the OAI Key Code is #3. The D
term function key that is to be used 
to access Voicemail Disconnect in this example is function key #8. Since OAI Key 
Code #3 corresponds in the PBX to MAT Function Key Index #36, D
term function 
key #8 is assigned to Function Key Index #36 using the AKYD command.
Now whenever a phone user presses function key #8 on any assigned D
term, MSF 
129 initiates communication with Voicemail Disconnect.
Figure 1-2   Example OAI Function Key Assignment
This completes the installation and set-up of the Voicemail Disconnect 
application. Refer to Chapter 2 of this manual for Operation information.
APM
Application
Configuration
Directory Dialer 
configured for 
MSF #129MAT
AOKC
Command
OAI Key 
Code #3 given 
MSF facility type 
and
Op-Code #129
MAT
AKYD
Command
Function Key 
Index #36 
assigned to 
D
term Function 
Key #8
. . . . .. . . . .
. . .
. . .
  
PBX Correspondence of
 AOKC AKYD
  OAI Function
 Key Codes
Key Indices
  1 < . . . .> 34
  2 < . . . .> 35
  3 < . . . .> 36
  4 < . . . .> 37
  5 < . . . .> 38
  6 < . . . .> 39
  7 < . . . .> 40
  8 < . . . .> 41
  9 < . . . .> 42
 10 < . . . .> 43
 11 < . . . .> 44
 12 < . . . .> 45
 13 < . . . .> 46
 14 < . . . .> 47 
						

							NDA-30130   Revision 1Page 9
Voicemail Disconnect Installation & Operation Manual OPERATION
Chapter 2 OPERATION
Using 
Voicemail Disconnect
Voicemail Disconnect is used by pressing the Dterm OAI key assigned to the 
Voicemail Disconnect function. If the assigned key for this function is unknown, 
see your system administrator. 
One of four status messages may be displayed on your phone when Voicemail 
Disconnect is invoked:
RELEASED- The request is successful, call has been disconnected.
FAILED- The request failed. This means either your phone/subline 
(is not connected) to any device, or the disconnect process 
failed. 
DB ERROR- The request can not be processed because your phone 
does not exist in the database, or your phone does not have 
a subline in the database.
SUBS BUSY- The request can not be processed because you have more 
than one busy line, the application can not determine 
which one to disconnect. 
						

							OPERATION Voicemail Disconnect Installation & Operation Manual
Page 10NDA-30130   Revision 1
This Page Left Blank.