Nortel Modular Ics 6.0 Programming Record Manual

73
P0992642 03 Modular ICS 6.0 Programming Record
Sys Admin Log 
(Maintenance; Sys Admin Log)  
Sys Admin Log
Log item Time of log itemNumber of repetitions
Time and date that log was checked 

74
Modular ICS 6.0 Programming RecordP0992642 03
Network evt log 
(Maintenance; Network evt log)  
Network Log
Log itemTime of log item Number of repetitions
Time and date that log was checked 

75
P0992642 03 Modular ICS 6.0 Programming Record
Template specific defaults
For the Norstar MICS 6.0 system, the Square template is the default template. The Centrex, Hybrid, PBX 
and DID template are also available as an option at startup. 
For the Norstar MICS-XC 6.0 system, the PBX template is the default template. The DID template is also 
available as an option at startup. For information on defaults for Registration, Radio data, Radios, Cells, 
and the Registration password, refer to your MICS-XC...

76
Modular ICS 6.0 Programming RecordP0992642 03
Telco features (Feature assignmnt)
Lines defaults
Trunk/Line data (Target lines)
Trunk/Line data (Digital and Analog loopstart)
SettingSquareCentrexHybridPBXDID
Call log setNYSet 221:
Y
other sets:
NNdefault
target line: Y
other lines: N
Extl VMsg setNdefault target line: 
Y
other lines: N
SettingSquareCentrexHybridPBXDID
Rec’d #:NoneDN of the set it 
appears on
SettingSquareCentrexHybridPBXDID
Line type PublicLines             Pool 
001 to 030: Pool A
031...

77
P0992642 03 Modular ICS 6.0 Programming Record
Trunk/Line data (Digital and Analog Groundstart)
Trunk/Line data (Digital and E&M lines)
SettingSquareCentrexHybridPBXDID
Line type PublicLines             Pool 
001 to 030: Pool A
031 to 060: Pool B
061 to 068: Pool C
069 to 076: Pool D
077 to 084: Pool E
085 to 092: Pool F
093 to 0100: Pool G
101 to 108: Pool H
109 to 112: Pool I
113 to 116: Pool J
117 to 120: Pool K
121 to 124: Pool L
125 to 128: Pool M
129 to 132: Pool N
133 to 136: Pool O
137 to 140:...

78
Modular ICS 6.0 Programming RecordP0992642 03
Trunk/Line data (Digital and Analog DID)
Trunk/Line data (BRI-2, BRI-ST, BRI-U2 and BRI-U4 lines)
SettingSquareCentrexHybridPBXDID
Line type PublicLines             Pool 
001 to 030: Pool A
031 to 060: Pool B
061 to 068: Pool C
069 to 076: Pool D
077 to 084: Pool E
085 to 092: Pool F
093 to 0100: Pool G
101 to 108: Pool H
109 to 112: Pool I
113 to 116: Pool J
117 to 120: Pool K
121 to 124: Pool L
125 to 128: Pool M
129 to 132: Pool N
133 to 136: Pool O
137...

79
P0992642 03 Modular ICS 6.0 Programming Record
Restrictions
Services defaults
Access codes
SettingSquareCentrexHybridPBXDID
Restrn flt 00No restrictions (cannot be changed)
Restrn flt 01
Restr’n 01
Restr’n 02
Override 001
Override 002
Override 003
Restr’n 03
Override 001
Restr’n 04
Restr’n 05
Restr’n 06
Restr’n 07
Restr’n 08
Restr’n 09
Restr’n 10
0
1
1800
1877
1888
911
911
411
976
1976
1976
1900
1900
555121290
91
91800
91877
91888
9911
9911
9411
9976
91976
91976
91900
91900
955512120
1...

80
Modular ICS 6.0 Programming RecordP0992642 03
Glossary of programming headings and settings
This section presents the programming hierarchy in the Norstar Modular ICS/Modular ICS-XC interface. The dots each represent a
level below the top level 
Top LevelLevel 1Level 2Level 3
Below the 
3rd level




Menu item Description
Profile 
(use only at system startup)
Change on non-North American systems, only! 
Use this command to choose a profile that reflects the trunk card...

81
P0992642 03Modular ICS 6.0 Programming Record
Use the following commands to change defaults and configure the lines and sets to suit your system requirements.
Use Installer or Administrator access codes.
Te r m i na ls  &  Se t sThese commands allow you to assign settings to each telephone (DN).
 Show set:_Enter the D N of the telephone you want to program.
 XXXX:XXXXDN number and current name displays to confirm your request.
 Line accessThese commands allow you to assign lines to each DN. 
You...

82
Modular ICS 6.0 Programming RecordP0992642 03
 DND on BusySelect whether or not an incoming call rings if the user already is on another 
call.
 Handsfree Select whether Handsfree will be available to a telephone. 
 HF answerbackSelect whether a user can automatically  answer a  voice  call without lifting the 
receiver or pressing the 
Å button. It is always turned off for a T7100 
telephone.
 Pickup grpAny user in a pickup group can answer calls to any other telephone in their 
group...