Nortel Modular Ics 6.0 Programming Record Manual

•

Modular ICS 6.0 Programming Record
(includes MICS-XC programming)
Use with 
MICS 6.0 or
MICS-XC 6.0 software
P0992642 03 

Telephone buttons
You can use the following types of telephones to program your MICs system:
M7310 or M7324 Norstar sets
T7316 Business Series Terminal
This guide uses the Business Series Telephone button icons for programming procedures. 
Refer to the table below for the keycap icons that correspond to the programming commands. 
Business Series 
Terminals
T7100, T7208, T7316, 
T7406Button descriptionNorstar sets
M7100, M7208, M7310, 
M7324
²Featureƒ
T7208 and T7316:
Handsfree: 
Mute: Handsfree/Mute©
³ú...

P0992642 03 Modular ICS 6.0 Programming Record
Contents
Telephone buttons ii
General information 1
Installed equipment 2
Programming overview (Profiles 1 and 4) 3
Programming overview (Profiles 2 and 3) 6
Programming overview MICS-XC (Companion) 9
Companion programming charts 13
System LID  (Companion sets for MICS-XC systems) 13
Software keys 13
SysID 13
Companion ID 13
Password keys for Companion (MICS-XC systems)  13
Reg. pswd (XC Companion) 13
Change DN type (Companion sets for MICS-XC systems) 14...

iv
Modular ICS 6.0 Programming RecordP0992642 03 
Terminals&Sets 20
Line Access 20
Capabilities 21
Name 22
User prefernces 22
Button prgrming 23
User speed dial 31
Restrictions 32
Restrn filters 32
Set restrns 35
Line/set restrns 35
Telco features 
(Terminals&Sets:Telco features) 36
Feature assignmnt 36
1stDisplay 36
Called ID 36
Log space 36
Lines 37
Trunk/Line Data 37
If Target Line 37
If T1 and Groundstart 38
If T1 and Loopstart 38
If T1 and E&M 39
If T1 and DID 40
If BRI-2 or BRI-ST (ISDN) 41
If...

v
P0992642 03 Modular ICS 6.0 Programming Record
If Protocol is SL-1 or TIE service type 47
Using line pools to create a dialing plan 47
Dest codes 48
Activating routing shedules 50
Common settings 50
Control sets 50
Schedule names 50
Sys speed dial 51
Passwords 52
COS pswds 52
Call log paswds 53
Progrming pswds 53
Hospitality 53
Time&Date  54
System prgrming 54
Hunt groups 54
Change DNs 54
Featr settings 55
Direct-dial 55
CAP assignment 56
Dialing plan 56
Access codes 56
Remote access 58
Rec’d # length...

vi
Modular ICS 6.0 Programming RecordP0992642 03 
ETSI (Profile 2, only) (software key required) 60
MCDN (Profile 1, 2, and 3, only) (software key required) 60
Telco features 61
VMSg ctr tel#s 61
ONN blocking 61
Software keys 62
SysID 62
Password keys 62
Password keys for ISDN PRI 62
Password keys for fixed T1 lines 62
Password keys for Advanced Private Network and Private Network Tandeming (MCDN) 62
Hardware 63
Cards on KSU 63
If card is a Loop card 63
If card is a T1 card 63
If card is a PRI card 64
If...

vii
Modular ICS 6.0 Programming RecordP0992642 03 
Lines defaults 76
Trunk/Line data (Target lines) 76
Trunk/Line data (Digital and Analog loopstart) 76
Trunk/Line data (Digital and Analog Groundstart) 77
Trunk/Line data (Digital and E&M lines) 77
Trunk/Line data (Digital and Analog DID) 78
Trunk/Line data (BRI-2, BRI-ST, BRI-U2 and BRI-U4 lines) 78
Restrictions 79
Services defaults 79
Access codes 79
Glossary of programming headings and settings 80 

viii
Modular ICS 6.0 Programming RecordP0992642 03  

1
P0992642 03 Modular ICS 6.0 Programming Record
General information
All defaults for the default templates are shown in bold and underlined text.
Copying set programming
You can use the COPY
COPYCOPY COPY command to copy programming from one telephone to other set, a range of sets or all the sets. Depending on
where the display button is pressed, you will copy either all the programming for a telephone or only the programming found under one
of the individual sub-headings. 
For general set copying, you...

2
Modular ICS 6.0 Programming RecordP0992642 03
Installed equipment
0X32 ICSTelephones
QuantityEquipmentQuantityEquipment
Integrated Communication System (ICS)M7100 telephone
Modular ICS NVRAM cartridgeM7208 telephone
Modular ICS ROM software cartridgeM7310 telephone
Cartridge assemblyM7310 with Busy Lamp Field (BLF)
Expansion Cartridge 2-port (fiber)M7324
Expansion Cartridge 6-port (fiber)M7324 with 1 central answering position (CAP)
6-port Expansion and IVD Services (Combo card)M7324 with 2 central...