Nortel Compact Ics 6.1 Programming Record Manual

Page  71
P0603545   02Compact ICS 6.1 Programming Record
 Aux. ringerSelect whether an auxiliary ringer (if installed) will ring for incoming calls on 
this specific line.
 Full AutoHoldSelect whether an idle line will be put on hold when another line is selected. 
This setting does not appear for target lines.
 Distinct RingChoose whether the line will have a distinctive ring pattern.
 LossPkgSelect the appropriate loss/gain and impedance package for analog loop lines 
only. Select the package...

Page  72
Compact ICS 6.1 Program ming RecordP0603545   02
ServicesA programming section that lets you create services for  night ringing, routing 
and restrictions for making external calls.
 Ringing serviceAssign additional telephones to ring for a line during specified periods of the 
day or night.
 Ringing groupsDefine groups of extended ringing sets.
 Show group:_Enter the number of the Ring group you want to program (01-20).
 Ring grp 01Enter the valid ring group number from 01 to 20. All...

Page  73
P0603545   02Compact ICS 6.1 Programming Record
 Routing serviceA programming section that lets you create up to 500 destination codes and 
999 routes to provide a dialing plan or “least cost routing”.
 RoutesCreate the routes to be used when a destination code is dialed.
 Show route:_Enter the number of the route you want to create.
 DialOutEnter the number (up to 24 digits or  characters)  you want this route to dial out 
(if required).
 UseSelect the line pool you want this...

Page  74
Compact ICS 6.1 Program ming RecordP0603545   02
 Common settingsIn this programming section, you can assign settings that are shared by 
different services.
 Control setsAssign control telephones to turn services on or off. 
 For linesSelect a control set for each line.
 Show line:_Enter the number of the line you want to program.
 L001Assign a control telephone to each external line. This telephone is where you 
turn services on and off for the line.
 For setsSelect a control...

Page  75
P0603545   02Compact ICS 6.1 Programming Record
 Bypass restr’nSelect whether a programmed system speed dial number can bypass 
restrictions programmed for a line and/or a telephone.
PasswordsA programming section that lets you assign passwords to restrict access to 
programming and system features.
 COS pswdsCreate up to 100 six-digit passwords that control access and use of the 
Norstar system by internal and remote users.
 Show pswd#:_Enter the two-digit Class of Service password number...

Page  76
Compact ICS 6.1 Program ming RecordP0603545   02
System prgrmingA programming section that lets you change system-wide settings, Auto 
Attendant, and CCR programming
 Hunt groupsA programming section that lets you set up incoming calls on a specific DN to 
be routed to a group of sets.
 Show group:_Enter the DN of the telephone you want to program.
 Member DNsEnter the DN of the telephone you want to add to the group.
 Line assignmentAllows you to assign or unassign a line to a...

Page  77
P0603545   02Compact ICS 6.1 Programming Record
 DRT to primeSelect  whether to automatically transfer unanswered external calls to a prime 
telephone. 
 DRT delaySelect the number of times a call rings before Delayed Ring Transfer transfers 
it to a prime telephone. This setting only appears if DRT to prime is Yes.
 Held reminderSelect whether the telephone reminds you when a call is on hold.
 Remind delaySelect the number of seconds before the telephone reminds you that a call is 
on...

Page  78
Compact ICS 6.1 Program ming RecordP0603545   02
 Direct-dialSelect whether an internal or external number is used for the Direct-dial 
telephone.
 D-Dial 1-5Enter the internal or external number that the system will automatically dial 
when someone enters the Direct-dial digit.
 CAP/KIM assignmentUse these commands to assign the DNs of  telephones to  a central answering 
position (CAP), which can be composed of one or more CAP module attached 
to a M7234 telephone  or to one or more KIMs...

Page  79
P0603545   02Compact ICS 6.1 Programming Record
 System  AnswerThis feature answers external calls and places them on hold at the attendant 
set until the attendant/receptionist can answer them. 
 AfterSelect the number of rings that the caller will hear before the system answers.
 Fax SwitchSelect whether the Fax detection switch is active or not with the Auto 
Attendant’s System Answer feature. The default is set to Off.
 CCRCustom Call Routing(CCR) allows calls on certain lines to...

Page  80
Compact ICS 6.1 Program ming RecordP0603545   02
 DN lengthSelect the length of DNs. DN length can be three to seven digits. Each 
increase in DN length adds the digit 2 to an existing DN (for example: DN 344, 
increased to five digits becomes 22344).
 Nat’nl lengthThe length of the telephone number dialed to reach a person within the same 
country.
 Make/Break:Select the Make/Break ratio. The default Make/Break ratio is 40 / 60. 
 Release reasonsRelease reasons.
 Internal modemSetting for...