Nortel Compact Ics 6.1 Programming Record Manual

Page  61
P0603545   02Compact ICS 6.1 Programming Record
Cd2-KSU
(for Profiles 2 and  3)
For Loopstart Trunk Cartridges
Card typeLoop
Lines031-034
Discon timer60 100 260460600
For BRI Cartridges
Card typeBRI-2 BRI-ST
Loops225-226 227-228
Loop225226227228
TypeSTSTSTST
Lines__ __ __
__ __ ____ __ __
__ __ ____ __ __
__ __ ____ __ __
__ __ __
if Loop is S
SamplingAdaptveFixedAdaptveFixedAdaptveFixedAdaptveFixed
DNs on Loop
(7 ISDN DNs  max. for 
the system)__ __ __ __ __ __ __
__ __ __ __ __ __ __
__ __ __...

Page  62
Compact ICS 6.1 Program ming RecordP0603545   02
Maintenance
System version 
(Maintenance; System version)
  
System Version Port/DN Status
SP: Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device:
Device: 

Page  63
P0603545   02Compact ICS 6.1 Programming Record
Sys test log 
(Maintenance; Sys test log)
Sys Test Log
Log itemTime of log item Number of repetitions
Time and date that log was checked 

Page  64
Compact ICS 6.1 Program ming RecordP0603545   02
Sys Admin Log 
(Maintenance; Sys Admin Log)  
Sys Admin Log
Log itemTime of log item Number of repetitions
Time and date that log was checked 

Page  65
P0603545   02Compact ICS 6.1 Programming Record
Template specific defaults
For the Norstar CICS 6.1 system, the Square template is the default template. The Square default values are used 
throughout the Programming Record. The Hybrid and PBX templates are also available as an option at startup. The 
following charts show the sections of the Programming Record where the Hybrid and PBX default values differ from 
the Square template default values.
Terminals&Sets defaults
Line Access
Lines...

Page  66
Compact ICS 6.1 Program ming RecordP0603545   02
Glossary of programming headings and settings
This section presents the programming hierarchy in the Norstar Compact ICS interface. The dots each represent a level
below the top leve.
l
   
Top LevelLevel 1Level 2Level 3
Below the 
3rd level




The dots next to each heading in this glossary, represent the programming hierarchy in the Norstar Compact ICS.
Profile 
(use only at system startup)
Change on non-North...

Page  67
P0603545   02Compact ICS 6.1 Programming Record
 Prime lineSelect a prime line for the telephone. The prime line is the first line selected 
automatically for  making calls from the telephone.  To select  a line or line pool 
as prime line, the line or line pool must have been assigned to the telephone.
 Intercom  keysSelect the number of intercom buttons on a telephone for accessing internal 
lines and line pools.
 Answer DNsAssigns answer buttons to a telephone so that it can monitor and...

Page  68
Compact ICS 6.1 Program ming RecordP0603545   02
 HotlineSelect whether a telephone number will be dialed automatically when a user 
lifts the handset or presses the Handsfree/Mute button. Choose Intrnl to enter 
an internal Norstar telephone as the hotline. Choose Extrnl to enter an 
external telephone as the hotline. 
 Aux. ringerSelect whether an auxiliary ringer (if installed) will ring for incoming calls at 
this telephone.
 Allow redirectSelect whether to allow lines at this...

Page  69
P0603545   02Compact ICS 6.1 Programming Record
 RestrictionsLets you create and assign restriction filters which prevent a user from making 
certain kinds of calls from a telephone, and copy the restrictions from this set 
to other sets.
 Restrn filtersThese are sets or groups of restrictions and associated overrides that specify 
the external numbers or feature codes that cannot be dialed from a telephone 
or line.
 Show filter:_Enter the two-digit restriction filter number. 
 Restrn...

Page  70
Compact ICS 6.1 Program ming RecordP0603545   02
 Telco featuresThis programming section lets you program the way the Norstar system works 
with features and services that are based in the public network or other 
outside source, namely Call Display and an external voice message service.
 Feature assignIn this programming section, you can assign CLASS services, such Call 
Display, in order to capture information about incoming and outgoing calls. 
 Show line:_Enter the number of the line...