Nortel C3060 Portable Telephone User Guide

41T
echnical specifications for USA
Vo l t a g e
3.6 V rechargeable batteries 
4.5 V (total voltage rating), three AAA alkaline batteries 
Frequency band
1.920 to 1.930 GHz
Total channel 
capacity
99
Operating 
temperature
14°F to 104°F
RF output power
32 mW ERP maximum 

42Regulator y 
compliance
PCI CAI: FCC Etiquette
This device complies with Part 15 of the FCC rules. 
Operation is subject to the following two conditions:
1). This device may not cause harmful interference, and
2). This device must accept any interference received, 
including interference that may cause undesired operation.
Any changes or modifications applied to the portable 
telephone not expressly approved by Nortel could void the 
user’s authority to operate the equipment.
Privacy
This portable...

43C
aring for your portable
Temperature 
extremes
Avoid subjecting the portable telephone to extremes in 
temperature.
Care and 
maintenance
Clean the portable telephone by wiping it with a damp 
cloth. Do not use solvents or polishes. If your portable 
telephone does not work, check all charging contacts on 
the portable and the charger for dirt, grease, or other 
material. If necessary, clean them with a soft dry cloth.
If your portable drops into a liquid, let the portable dry for 
two days before...

44
Do not spray 

45U
sing your C3060 Portable with 
Meridian Companion
This procedure describes steps to access several features of your 
portable telephone. Available features vary depending on your 
telephone system. FeaturesCall Forward1. Press 
i
.
2. Enter ___________ (flexible feature code).
3. Dial the number to which you want to forward your calls.
4. Press
 k
.
Cancel Call Forward1. Press 
i
.
2. Enter ____________ (flexible feature code).
3. Press 
k
. 

46
Call Park 1. While on a call, press
LINK
.
2. Enter  ____________ (flexible feature code).
3. Enter  ____________ (the number where you want to park 
the call).
4. Press 
k
 to end the current call.
Retrieve a parked call1. Press
 i
.
2. Enter  ____________ (flexible feature code).
3. Enter the number to which the call was parked.
Conference1. While on a call with the first party, press 
LINK
.
2. Dial the second number.
3. When your call is answered, press  
LINK
.
Tr a n s f e r1. While on a call,...

47
Call WaitingWhile you are on a call, your portable beeps to indicate you have 
another call.
1. Press
LINK
 to answer the second call. 
2. Press
LINK
 again to return to your previous call.
Ring Again1. When you encounter a busy number, press
LINK
.
2. Enter  ____________ (flexible feature code).
3. Pr ess 
k
. Your portable rings you back when a busy party 
is free.
4. Press 
i
. Your portable automatically places the call.
Cancel Ring Again1. Press 
i
.
2. Enter  ____________ (flexible feature...

48
2. Enter  ____________ (System Speed Call code).Add a link1. Press 
m, , 
or .
.
2. Select 
Link signal
. The portable will display an 
L.
Message WaitingYour portable displays 
Message waiting
 if you have a voice 
mail message. If you have already stored a message waiting 
code, you can access your messages by selecting 
CALL
. (See 
page 27 for more information.)
Switch from your portable to your desk telephoneIf Wireless Privacy is enabled
•Use Call Transfer.
• Use Conference.
If Wireless Privacy...

49
3. Still having trouble? Call your system administrator.Other frequently used Feature Codes:
Contact for your system: Nam e:
Te l  # : 

50
Troubleshooting checklist